Flexible Multimode Polymer Waveguide Arrays for Versatile High-Speed Short-Reach Communication Links

Multimode polymer waveguides have attracted great interest for use in high-speed short-reach communication links as they can be cost-effectively integrated onto standard PCBs using conventional methods of the electronics industry and provide low loss (30 GHz×m) interconnection. The formation of such waveguides on flexible substrates can further provide flexible low-weight low-thickness interconnects and offer additional freedom in the implementation of high-speed short-reach optical links. These attributes make these flexible waveguides particularly attractive for use in low-cost detachable chip-to-chip links and in environments where weight and shape conformity become important, such as in cars and aircraft. However, the highly-multimoded nature of these waveguides raises important questions about their performance under severe flex due to mode loss and mode coupling. In this work therefore, we investigate the loss, crosstalk and bandwidth performance of such waveguides under out-of plane bending and in-plane twisting under different launch conditions and carry out data transmission tests at 40 Gb/s on a 1 m long spiral flexible waveguide under flexure. Excellent optical transmission characteristics are obtained while robust loss, crosstalk and bandwidth performance are demonstrated under flexure. Error-free (BER<10-12) 40 Gb/s data transmission is achieved over the 1 m long spiral waveguide for a 180° bend with a 4 mm radius. The obtained results demonstrate the excellent optical and mechanical properties of this technology and highlight its potential for use in real-world systems.Jaguar Land Rover, CAPE LEAS

Progress in the Smart Pixel Technologies

The purpose of this paper is to review the recent progress in the developing smart pixel technologies. The paper begins by reviewing some of the rapidly evolving smart pixel terminologies. It then describes several of the smart pixel technologies that have recently emerged. Finally, it outlines the performance of these technologies in both device complexity and aggregate capacity. The reviewed SPA technologies include both the modulator-based FET-SEED, hybrid CMOS-SEED, and LCOS smart pixels and the source-based hybrid VCSEL/MSM, ELO, flip-chip-bonded VCSEL/MSM, and monolithic MSM/MESFET/VCSEL smart pixels

CONVERGED RACK ARCHITECTURE (CRA) FOR DATA CENTER

The data center hardware (HW) infrastructure in public and private clouds is going through a paradigm shift due to the demands of a heterogenous computing model. The lower-cost economics of a private cloud need to be augmented with the operational simplicity of a public cloud. The Open Compute Project (OCP) started with the goal of simplifying the compute aspect and they did succeed to some extent, but enterprise adoption has been slow due to the HW complexity of various elements and version compatibility. Since the evolution of OCP, a number of technology changes have occurred, and a new infrastructure standard is necessary to tackle the heterogenous computing model along with a thermal and high-speed input/output (I/O) interconnection nexus. Techniques are presented herein that support a converged rack architecture (CRA). Such an architecture encompasses a universal rack I/O paradigm comprising embedded opto-electrical data I/O posts, centralized power and cooling, and a common rack management unit (RMU) which allows a rack itself to be thought of as a compute unit where different compute, network, and storage components may be composed in a virtual domain on the fly and then decomposed when they are not required. In essence, a CRA manages and treats a rack frame as a complete converged system of compute, network, and storage elements and not as disparate entities

Photonic integration enabling new multiplexing concepts in optical board-to-board and rack-to-rack interconnects

New broadband applications are causing the datacenters to proliferate, raising the bar for higher interconnection speeds. So far, optical board-to-board and rack-to-rack interconnects relied primarily on low-cost commodity optical components assembled in a single package. Although this concept proved successful in the first generations of optical-interconnect modules, scalability is a daunting issue as signaling rates extend beyond 25 Gb/s. In this paper we present our work towards the development of two technology platforms for migration beyond Infiniband enhanced data rate (EDR), introducing new concepts in board-to-board and rack-to-rack interconnects. The first platform is developed in the framework of MIRAGE European project and relies on proven VCSEL technology, exploiting the inherent cost, yield, reliability and power consumption advantages of VCSELs. Wavelength multiplexing, PAM-4 modulation and multi-core fiber (MCF) multiplexing are introduced by combining VCSELs with integrated Si and glass photonics as well as BiCMOS electronics. An in-plane MCF-to-SOI interface is demonstrated, allowing coupling from the MCF cores to 340x400 nm Si waveguides. Development of a low-power VCSEL driver with integrated feed-forward equalizer is reported, allowing PAM-4 modulation of a bandwidth-limited VCSEL beyond 25 Gbaud. The second platform, developed within the frames of the European project PHOXTROT, considers the use of modulation formats of increased complexity in the context of optical interconnects. Powered by the evolution of DSP technology and towards an integration path between inter and intra datacenter traffic, this platform investigates optical interconnection system concepts capable to support 16QAM 40GBd data traffic, exploiting the advancements of silicon and polymer technologies

Design, measurement and analysis of multimode light guides and waveguides for display systems and optical backplane interconnections

The aim of the research in this thesis was to design and model multimode lightguides for optimising visible light for liquid crystal display systems and to design, model and experimentally test infrared light propagation within polymer multimode waveguides as board-to-board interconnects for high data rate communication. Ray tracing models the behaviour of a novel LCD colour separating backlight to optimize its efficiency by establishing the optimum dimensions and position for a unique micro-mirror array within the light guide. The output efficiency increased by 38.2% compared to the case without the embedded mirror array. A novel simulation technique combined a model of liquid crystal director orientation and a non-sequential ray tracing program was used first time to compute the reflected intensity from a LCOS device for a rear projection TV system. The performance of the LCOS display was characterised by computing the contrast ratio over a ±15° viewing cone. Photolithographically manufactured embedded multimode waveguides made from acrylate Truemode® polymer are characterized by measuring the optical transmission loss of key waveguide components including. straight, bend and crossing. Design rules derived from the experimental measurement were used to optimize optical PCB (OPCB) layout. A most compact and complex optical interconnects layout up-to-date for data centres, including parallel straight waveguide sections, cascaded 90° bends and waveguide crossing other than 90° angles, was designed, tested and used in an optic-electrical demonstration platform to convey a 10.3 Gb/s data. A further new method for reducing the end facet roughness and so the coupling loss, by curing a thin layer of core material at the end of the waveguide facet to cover the roughness fluctuations, was proposed and successfully demonstrated giving the best results reported to date resulting in an improvement of 2.8 dB which was better than the results obtained by using index matching fluid

Characterisation of a reconfigurable free space optical interconnect system for parallel computing applications and experimental validation using rapid prototyping technology

Free-space optical interconnects (FSOIs) are widely seen as a potential solution to present and future bandwidth bottlenecks for parallel processing applications. This thesis will be focused on the study of a particular FSOI system called Optical Highway (OH). The OH is a polarised beam routing system which uses Polarising Beam Splitters and Liquid Crystals (PBS/LC) assemblies to perform reconfigurable interconnection networks. The properties of the OH make it suitable for implementing different passive static networks. A technology known as Rapid Prototyping (RP) will be employed for the first time in order to create optomechanical structures at low cost and low production times. Off-theshelf optical components will also be characterised in order to implement the OH. Additionally, properties such as reconfigurability, scalability, tolerance to misalignment and polarisation losses will be analysed. The OH will be modelled at three levels: node, optical stage and architecture. Different designs will be proposed and a particular architecture, Optimised Cut-Through Ring (OCTR), will be experimentally implemented. Finally, based on this architecture, a new set of properties will be defined in order to optimise the efficiency of the optical channels

Architecture and Advanced Electronics Pathways Toward Highly Adaptive Energy- Efficient Computing

With the explosion of the number of compute nodes, the bottleneck of future computing systems lies in the network architecture connecting the nodes. Addressing the bottleneck requires replacing current backplane-based network topologies. We propose to revolutionize computing electronics by realizing embedded optical waveguides for onboard networking and wireless chip-to-chip links at 200-GHz carrier frequency connecting neighboring boards in a rack. The control of novel rate-adaptive optical and mm-wave transceivers needs tight interlinking with the system software for runtime resource management

Polymer waveguide based optical interconnects for high-speed on-board communications

This dissertation presents a study of multimode polymer waveguide technology for use in board-level communication links for future data centres and supercomputers. The motivation for this work comes from the severe interconnection bandwidth challenges faced by the conventional electrical interconnections technology and the potential performance advantages of optical interconnections. This thesis presents the work to address the bandwidth bottleneck by developing high-bandwidth multimode polymer waveguides. The use of multimode waveguides provides relaxed alignment tolerances enabling low-cost assembly tools. Siloxane polymer materials developed by Dow Corning Corporation are chosen to form the waveguides in this work due to their favourable optical properties (optical losses as low as 0.03 dB/cm and the ability to withstand temperatures in excess of 350 °C) that allow the waveguides to be directly integrated on printed circuits boards (PCBs) using conventional manufacturing processes. Useful design rules for the use of the multimode polymer waveguides are theoretically derived while the bandwidth-length products are investigated under various launch conditions. Frequency-domain measurements and ultra-short pulse measurements are then carried out to investigate the bandwidth performance of the polymer waveguides under different launch conditions and with lateral misalignments. The instrument-limited frequency-domain measurements show that these waveguides exhibit bandwidth-length products (BLPs) of at least 35 GHz×m, while the pulse broadening measurements reveal the actual BLPs to be in excess of 70 GHz×m under a 50 μm multimode-fibre (MMF) launch and 100 GHz×m for a restricted launch across a wide range of input offsets (>±10 μm). This shows the potential for data transmission rates of 100 Gb/s and beyond over a single waveguide channel. A theoretical model is developed using the measured refractive index profile and good agreement with the above experimental results is found. The effects of graded refractive index profiles on the performance of waveguide components (bends, crossings) are also investigated, demonstrating that appropriate refractive index engineering can provide enhanced waveguide loss performance while exhibiting adequate bandwidth. Waveguide bends with excess loss below 1 dB for a radius >6 mm, crossings with loss less than 0.02 dB/crossing while exhibiting adequate link bandwidth (>47 GHz×m) can be achieved for a MMF launch. On this basis, advanced modulation formats are investigated across the board-level waveguide links for further increasing the on-board data rates. Record NRZ-based 40 Gb/s and 56 Gb/s PAM-4 based data transmission over a 1 m long multimode polymer spiral waveguide are theoretically and experimentally demonstrated