Architectures and technologies for quality of service provisioning in next generation networks

A NGN is a telecommunication network that differs from classical dedicated networks because of its capability to provide voice, video, data and cellular services on the same infrastructure (Quadruple-Play). The ITU-T standardization body has defined the NGN architecture in three different and well-defined strata: the transport stratum which takes care of maintaining end-to-end connectivity, the service stratum that is responsible for enabling the creation and the delivery of services, and finally the application stratum where applications can be created and executed. The most important separation in this architecture is relative to transport and service stratum. The aim is to enable the flexibility to add, maintain and remove services without any impact on the transport layer; to enable the flexibility to add, maintain and remove transport technologies without any impact on the access to service, application, content and information; and finally the efficient cohesistence of multiple terminals, access technologies and core transport technologies. The Service Oriented Architecture (SOA) is a paradigm often used in systems deployment and integration for organizing and utilizing distributed capabilities under the control of different ownership domains. In this thesis, the SOA technologies in network architetures are surveyed following the NGN functional architecture as defined by the ITU-T. Within each stratum, the main logical functions that have been the subject of investigation according to a service-oriented approach have been highlighted. Moreover, a new definition of the NGN transport stratum functionalities according to the SOA paradigm is proposed; an implementation of the relevant services interfaces to analyze this approach with experimental results shows some insight on the potentialities of the proposed strategy. Within NGN architectures research topic, especially in IP-based network architectures, Traffic Engineering (TE) is referred to as a set of policies and algorithms aimed at balancing network traffic load so as to improve network resource utilization and guarantee the service specific end-to-end QoS. DS-TE technology extends TE functionalities to a per-class basis implementation by introducing a higher level of traffic classification which associates to each class type (CT) a constraint on bandwidth utilization. These constraints are set by defining and configuring a bandwidth constraint (BC) model whih drives resource utilization aiming to higher load balancing, higher QoS performance and lower call blocking rate. Default TE implementations relies on a centralized approach to bandwidth and routing management, that require external management entities which periodically collect network status information and provide management actions. However, due to increasing network complexity, it is desiderable that nodes automatically discover their environment, self-configure and update to adapt to changes. In this thesis the bandwidth management problem is approached adopting an autonomic and distributed approach. Each node has a self-management module, which monitors the unreserved bandwidth in adjacent nodes and adjusts the local bandwidth constraints so as to reduce the differences in the unreserved bandwidth of neighbor nodes. With this distributed and autonomic algorithm, BC are dinamically modified to drive routing decision toward the traffic balancing respecting the QoS constraints for each class-type traffic requests. Finally, Video on Demand (VoD) is a service that provides a video whenever the customer requests it. Realizing a VoD system by means of the Internet network requires architectures tailored to video features such as guaranteed bandwidths and constrained transmission delays: these are hard to be provided in the traditional Internet architecture that is not designed to provide an adequate quality of service (QoS) and quality of experience (QoE) to the final user. Typical VoD solutions can be grouped in four categories: centralized, proxy-based, Content Delivery Network(CDN) and Hybrid architectures. Hybrid architectures combine the employment of a centralized server with that of a Peer-to-peer (P2P) network. This approach can effectively reduce the server load and avoid network congestions close to the server site because the peers support the delivery of the video to other peers using a cache-and-relay strategy making use of their upload bandwidth. Anyway, in a peer-to-peer network each peer is free to join and leave the network without notice, bringing to the phenomena of peer churns. These dynamics are dangerous for VoD architectures, affecting the integrity and retainability of the service. In this thesis, a study aimed to evaluate the impact of the peer churn on the system performance is proposed. Starting from important relationships between system parameters such as playback buffer length, peer request rate, peer average lifetime and server upload rate, four different analytic models are proposed

Architectures and technologies for quality of service provisioning in next generation networks

A NGN is a telecommunication network that differs from classical dedicated networks because of its capability to provide voice, video, data and cellular services on the same infrastructure (Quadruple-Play). The ITU-T standardization body has defined the NGN architecture in three different and well-defined strata: the transport stratum which takes care of maintaining end-to-end connectivity, the service stratum that is responsible for enabling the creation and the delivery of services, and finally the application stratum where applications can be created and executed. The most important separation in this architecture is relative to transport and service stratum. The aim is to enable the flexibility to add, maintain and remove services without any impact on the transport layer; to enable the flexibility to add, maintain and remove transport technologies without any impact on the access to service, application, content and information; and finally the efficient cohesistence of multiple terminals, access technologies and core transport technologies. The Service Oriented Architecture (SOA) is a paradigm often used in systems deployment and integration for organizing and utilizing distributed capabilities under the control of different ownership domains. In this thesis, the SOA technologies in network architetures are surveyed following the NGN functional architecture as defined by the ITU-T. Within each stratum, the main logical functions that have been the subject of investigation according to a service-oriented approach have been highlighted. Moreover, a new definition of the NGN transport stratum functionalities according to the SOA paradigm is proposed; an implementation of the relevant services interfaces to analyze this approach with experimental results shows some insight on the potentialities of the proposed strategy. Within NGN architectures research topic, especially in IP-based network architectures, Traffic Engineering (TE) is referred to as a set of policies and algorithms aimed at balancing network traffic load so as to improve network resource utilization and guarantee the service specific end-to-end QoS. DS-TE technology extends TE functionalities to a per-class basis implementation by introducing a higher level of traffic classification which associates to each class type (CT) a constraint on bandwidth utilization. These constraints are set by defining and configuring a bandwidth constraint (BC) model whih drives resource utilization aiming to higher load balancing, higher QoS performance and lower call blocking rate. Default TE implementations relies on a centralized approach to bandwidth and routing management, that require external management entities which periodically collect network status information and provide management actions. However, due to increasing network complexity, it is desiderable that nodes automatically discover their environment, self-configure and update to adapt to changes. In this thesis the bandwidth management problem is approached adopting an autonomic and distributed approach. Each node has a self-management module, which monitors the unreserved bandwidth in adjacent nodes and adjusts the local bandwidth constraints so as to reduce the differences in the unreserved bandwidth of neighbor nodes. With this distributed and autonomic algorithm, BC are dinamically modified to drive routing decision toward the traffic balancing respecting the QoS constraints for each class-type traffic requests. Finally, Video on Demand (VoD) is a service that provides a video whenever the customer requests it. Realizing a VoD system by means of the Internet network requires architectures tailored to video features such as guaranteed bandwidths and constrained transmission delays: these are hard to be provided in the traditional Internet architecture that is not designed to provide an adequate quality of service (QoS) and quality of experience (QoE) to the final user. Typical VoD solutions can be grouped in four categories: centralized, proxy-based, Content Delivery Network(CDN) and Hybrid architectures. Hybrid architectures combine the employment of a centralized server with that of a Peer-to-peer (P2P) network. This approach can effectively reduce the server load and avoid network congestions close to the server site because the peers support the delivery of the video to other peers using a cache-and-relay strategy making use of their upload bandwidth. Anyway, in a peer-to-peer network each peer is free to join and leave the network without notice, bringing to the phenomena of peer churns. These dynamics are dangerous for VoD architectures, affecting the integrity and retainability of the service. In this thesis, a study aimed to evaluate the impact of the peer churn on the system performance is proposed. Starting from important relationships between system parameters such as playback buffer length, peer request rate, peer average lifetime and server upload rate, four different analytic models are proposed

Grid-based semantic integration of heterogeneous data resources: Implementation on a HealthGrid

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University.The semantic integration of geographically distributed and heterogeneous data resources still remains a key challenge in Grid infrastructures. Today's mainstream Grid technologies hold the promise to meet this challenge in a systematic manner, making data applications more scalable and manageable. The thesis conducts a thorough investigation of the problem, the state of the art, and the related technologies, and proposes an Architecture for Semantic Integration of Data Sources (ASIDS) addressing the semantic heterogeneity issue. It defines a simple mechanism for the interoperability of heterogeneous data sources in order to extract or discover information regardless of their different semantics. The constituent technologies of this architecture include Globus Toolkit (GT4) and OGSA-DAI (Open Grid Service Architecture Data Integration and Access) alongside other web services technologies such as XML (Extensive Markup Language). To show this, the ASIDS architecture was implemented and tested in a realistic setting by building an exemplar application prototype on a HealthGrid (pilot implementation). The study followed an empirical research methodology and was informed by extensive literature surveys and a critical analysis of the relevant technologies and their synergies. The two literature reviews, together with the analysis of the technology background, have provided a good overview of the current Grid and HealthGrid landscape, produced some valuable taxonomies, explored new paths by integrating technologies, and more importantly illuminated the problem and guided the research process towards a promising solution. Yet the primary contribution of this research is an approach that uses contemporary Grid technologies for integrating heterogeneous data resources that have semantically different. data fields (attributes). It has been practically demonstrated (using a prototype HealthGrid) that discovery in semantically integrated distributed data sources can be feasible by using mainstream Grid technologies, which have been shown to have some Significant advantages over non-Grid based approaches

Service-oriented architecture for device lifecycle support in industrial automation

Dissertação para obtenção do Grau de Doutor em Engenharia Electrotécnica e de Computadores Especialidade: Robótica e Manufactura IntegradaThis thesis addresses the device lifecycle support thematic in the scope of service oriented industrial automation domain. This domain is known for its plethora of heterogeneous equipment encompassing distinct functions, form factors, network interfaces, or I/O specifications supported by dissimilar software and hardware platforms. There is then an evident and crescent need to take every device into account and improve the agility performance during setup, control, management, monitoring and diagnosis phases. Service-oriented Architecture (SOA) paradigm is currently a widely endorsed approach for both business and enterprise systems integration. SOA concepts and technology are continuously spreading along the layers of the enterprise organization envisioning a unified interoperability solution. SOA promotes discoverability, loose coupling, abstraction, autonomy and composition of services relying on open web standards – features that can provide an important contribution to the industrial automation domain. The present work seized industrial automation device level requirements, constraints and needs to determine how and where can SOA be employed to solve some of the existent difficulties. Supported by these outcomes, a reference architecture shaped by distributed, adaptive and composable modules is proposed. This architecture will assist and ease the role of systems integrators during reengineering-related interventions throughout system lifecycle. In a converging direction, the present work also proposes a serviceoriented device model to support previous architecture vision and goals by including embedded added-value in terms of service-oriented peer-to-peer discovery and identification, configuration, management, as well as agile customization of device resources. In this context, the implementation and validation work proved not simply the feasibility and fitness of the proposed solution to two distinct test-benches but also its relevance to the expanding domain of SOA applications to support device lifecycle in the industrial automation domain

Grid-based semantic integration of heterogeneous data resources : implementation on a HealthGrid

The semantic integration of geographically distributed and heterogeneous data resources still remains a key challenge in Grid infrastructures. Today's mainstream Grid technologies hold the promise to meet this challenge in a systematic manner, making data applications more scalable and manageable. The thesis conducts a thorough investigation of the problem, the state of the art, and the related technologies, and proposes an Architecture for Semantic Integration of Data Sources (ASIDS) addressing the semantic heterogeneity issue. It defines a simple mechanism for the interoperability of heterogeneous data sources in order to extract or discover information regardless of their different semantics. The constituent technologies of this architecture include Globus Toolkit (GT4) and OGSA-DAI (Open Grid Service Architecture Data Integration and Access) alongside other web services technologies such as XML (Extensive Markup Language). To show this, the ASIDS architecture was implemented and tested in a realistic setting by building an exemplar application prototype on a HealthGrid (pilot implementation). The study followed an empirical research methodology and was informed by extensive literature surveys and a critical analysis of the relevant technologies and their synergies. The two literature reviews, together with the analysis of the technology background, have provided a good overview of the current Grid and HealthGrid landscape, produced some valuable taxonomies, explored new paths by integrating technologies, and more importantly illuminated the problem and guided the research process towards a promising solution. Yet the primary contribution of this research is an approach that uses contemporary Grid technologies for integrating heterogeneous data resources that have semantically different. data fields (attributes). It has been practically demonstrated (using a prototype HealthGrid) that discovery in semantically integrated distributed data sources can be feasible by using mainstream Grid technologies, which have been shown to have some Significant advantages over non-Grid based approaches.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

A Pattern-Based Approach to Scaffold the IT Infrastructure Design Process

Context. The design of Information Technology (IT) infrastructures is a challenging task since it implies proficiency in several areas that are rarely mastered by a single person, thus raising communication problems among those in charge of conceiving, deploying, operating and maintaining/managing them. Most IT infrastructure designs are based on proprietary models, known as blueprints or product-oriented architectures, defined by vendors to facilitate the configuration of a particular solution, based upon their services and products portfolio. Existing blueprints can be facilitators in the design of solutions for a particular vendor or technology. However, since organizations may have infrastructure components from multiple vendors, the use of blueprints aligned with commercial product(s) may cause integration problems among these components and can lead to vendor lock-in. Additionally, these blueprints have a short lifecycle, due to their association with product version(s) or a specific technology, which hampers their usage as a tool for the reuse of IT infrastructure knowledge. Objectives. The objectives of this dissertation are (i) to mitigate the inability to reuse knowledge in terms of best practices in the design of IT infrastructures and, (ii) to simplify the usage of this knowledge, making the IT infrastructure designs simpler, quicker and better documented, while facilitating the integration of components from different vendors and minimizing the communication problems between teams. Method. We conducted an online survey and performed a systematic literature review to support the state of the art and to provide evidence that this research was relevant and had not been conducted before. A model-driven approach was also used for the formalization and empirical validation of well-formedness rules to enhance the overall process of designing IT infrastructures. To simplify and support the design process, a modeling tool, including its abstract and concrete syntaxes was also extended to include the main contributions of this dissertation. Results. We obtained 123 responses to the online survey. Their majority were from people with more than 15 years experience with IT infrastructures. The respondents confirmed our claims regarding the lack of formality and documentation problems on knowledge transfer and only 19% considered that their current practices to represent IT Infrastructures are efficient. A language for modeling IT Infrastructures including an abstract and concrete syntax is proposed to address the problem of informality in their design. A catalog of IT Infrastructure patterns is also proposed to allow expressing best practices in their design. The modeling tool was also evaluated and according to 84% of the respondents, this approach decreases the effort associated with IT infrastructure design and 89% considered that the use of a repository with infrastructure patterns, will help to improve the overall quality of IT infrastructures representations. A controlled experiment was also performed to assess the effectiveness of both the proposed language and the pattern-based IT infrastructure design process supported by the tool. Conclusion. With this work, we contribute to improve the current state of the art in the design of IT infrastructures replacing the ad-hoc methods with more formal ones to address the problems of ambiguity, traceability and documentation, among others, that characterize most of IT infrastructure representations. Categories and Subject Descriptors:C.0 [Computer Systems Organization]: System architecture; D.2.10 [Software Engineering]: Design-Methodologies; D.2.11 [Software Engineering]: Software Architectures-Patterns

Organic Service-Level Management in Service-Oriented Environments

Dynamic service-oriented environments (SOEs) are characterised by a large number of heterogeneous service components that are expected to support the business as a whole. The present work provides a negotiation-based approach to facilitate automated and multi-level service-level management in an SOE, where each component autonomously arranges its contribution to the whole operational goals. Evaluation experiments have shown an increased responsiveness and stability of an SOE in case of changes

Foundations of efficient virtual appliance based service deployments

The use of virtual appliances could provide a flexible solution to services deployment. However, these solutions suffer from several disadvantages: (i) the slow deployment time of services in virtual machines, and (ii) virtual appliances crafted by developers tend to be inefficient for deployment purposes. Researchers target problem (i) by advancing virtualization technologies or by introducing virtual appliance caches on the virtual machine monitor hosts. Others aim at problem (ii) by providing solutions for virtual appliance construction, however these solutions require deep knowledge about the service dependencies and its deployment process. This dissertation aids problem (i) with a virtual appliance distribution technique that first identifies appliance parts and their internal dependencies. Then based on service demand it efficiently distributes the identified parts to virtual appliance repositories. Problem (ii) is targeted with the Automated Virtual appliance creation Service (AVS) that can extract and publish an already deployed service by the developer. This recently acquired virtual appliance is optimized for service deployment time with the proposed virtual appliance optimization facility that utilizes active fault injection to remove the non-functional parts of the appliance. Finally, the investigation of appliance distribution and optimization techniques resulted the definition of the minimal manageable virtual appliance that is capable of updating and configuring its executor virtual machine. The deployment time reduction capabilities of the proposed techniques were measured with several services provided in virtual appliances on three cloud infrastructures. The appliance creation capabilities of the AVS are compared to the already available virtual appliances offered by the various online appliance repositories. The results reveal that the introduced techniques significantly decrease the deployment time of virtual appliance based deployment systems. As a result these techniques alleviated one of the major obstacles before virtual appliance based deployment systems