1,890 research outputs found
Modeling elastic wave propagation in fluid-filled boreholes drilled in nonhomogeneous media: BEM – MLPG versus BEM-FEM coupling
The efficiency of two coupling formulations, the boundary element method (BEM)-meshless local Petrov–Galerkin (MLPG) versus the BEM-finite element method (FEM), used to simulate the elastic wave propagation in fluid-filled boreholes generated by a blast load, is compared. The longitudinal geometry is assumed to be invariant in the axial direction (2.5D formulation). The material properties in the vicinity of the borehole are assumed to be nonhomogeneous as a result of the construction process and the ageing of the material. In both models, the BEM is used to tackle the propagation within the fluid domain inside the borehole and the unbounded homogeneous domain. The MLPG and the FEM are used to simulate the confined, damaged, nonhomogeneous, surrounding borehole, thus utilizing the advantages of these methods in modeling nonhomogeneous bounded media. In both numerical techniques the coupling is accomplished directly at the nodal points located at the common interfaces. Continuity of stresses and displacements is imposed at the solid–solid interface, while continuity of normal stresses and displacements and null shear stress are prescribed at the fluid–solid interface. The performance of each coupled BEM-MLPG and BEM-FEM approach is determined using referenced results provided by an analytical solution developed for a circular multi-layered subdomain. The comparison of the coupled techniques is evaluated for different excitation frequencies, axial wavenumbers and degrees of freedom (nodal points).Ministerio de Economía y Competitividad BIA2013-43085-PCentro Informático Científico de Andalucía (CICA
An Overview of Recent Advances in the Iterative Analysis of Coupled Models for Wave Propagation
Wave propagation problems can be solved using a variety of methods. However, in many cases, the joint use of different numerical procedures to model different parts of the problem may be advisable and strategies to perform the coupling between them must be developed. Many works have been published on this subject, addressing the case of electromagnetic, acoustic, or elastic waves and making use of different strategies to perform this coupling. Both direct and iterative approaches can be used, and they may exhibit specific advantages and disadvantages. This work focuses on the use of iterative coupling schemes for the analysis of wave propagation problems, presenting an overview of the application of iterative procedures to perform the coupling between different methods. Both frequency- and time-domain analyses are addressed, and problems involving acoustic, mechanical, and electromagnetic wave propagation problems are illustrated
Numerical study on active and passive trailing edge morphing applied to a multi-MW wind turbine section
A progressive increasing in turbine dimension has characterized the technological development in offshore wind energy utilization. This aspect reflects on the growing in blade length and weight. For very large turbines, the standard control systems may not be optimal to give the best performance and the best vibratory load damping, keeping the condition of maximum energy production. For this reason, some new solutions have been proposed in research. One of these is the possibility of morphs the blade surface in an active way (increasing the performance in low wind region) or passive (load reduction) way.
In this work, we present a numerical study on the active and passive trailing edge morphing, applied to large wind turbines. In particular, the study focuses on the aerodynamic response of a midspan blade section, in terms of fluid structure interaction (FSI) and driven surface deformation.
We test the active system in a simple start-up procedure and the passive system in a power production with turbulent wind conditions, that is, two situations in which we expect these systems could improve the performance.
All the computations are carried out with a FSI code, which couples a 2D-CFD solver, a moving mesh solver (both implemented in OpenFOAM library) and a FEM solver.
We evaluate all the boundary conditions to apply in the section problem by simulating the 5MW NREL wind turbine with the NREL CAE-tools developed for wind turbine simulation
State of the Art in the Optimisation of Wind Turbine Performance Using CFD
Wind energy has received increasing attention in recent years due to its sustainability and geographically wide availability. The efficiency of wind energy utilisation highly depends on the performance of wind turbines, which convert the kinetic energy in wind into electrical energy. In order to optimise wind turbine performance and reduce the cost of next-generation wind turbines, it is crucial to have a view of the state of the art in the key aspects on the performance optimisation of wind turbines using Computational Fluid Dynamics (CFD), which has attracted enormous interest in the development of next-generation wind turbines in recent years. This paper presents a comprehensive review of the state-of-the-art progress on optimisation of wind turbine performance using CFD, reviewing the objective functions to judge the performance of wind turbine, CFD approaches applied in the simulation of wind turbines and optimisation algorithms for wind turbine performance. This paper has been written for both researchers new to this research area by summarising underlying theory whilst presenting a comprehensive review on the up-to-date studies, and experts in the field of study by collecting a comprehensive list of related references where the details of computational methods that have been employed lately can be obtained
Bem-Fem Coupling For Acoustic Effects On Aeroelastic Stability Of Structures.
Satu siri kerja telah dijalankan untuk membangunkan satu asas bagi skim komputasi dalam pengiraan pengaruh gangguan akustik terhadap kestabilan aeroanjalan struktur.
A series of work has been carried out to develop the foundation for the computational scheme for the calculation of the influence of the acoustic disturbance to the aeroelastic stability of the structure
A domain decomposition approach for coupled modelling of nonlinear soil-structure interaction
Accepted versio
Isogeometric FEM-BEM coupled structural-acoustic analysis of shells using subdivision surfaces
We introduce a coupled finite and boundary element formulation for acoustic
scattering analysis over thin shell structures. A triangular Loop subdivision
surface discretisation is used for both geometry and analysis fields. The
Kirchhoff-Love shell equation is discretised with the finite element method and
the Helmholtz equation for the acoustic field with the boundary element method.
The use of the boundary element formulation allows the elegant handling of
infinite domains and precludes the need for volumetric meshing. In the present
work the subdivision control meshes for the shell displacements and the
acoustic pressures have the same resolution. The corresponding smooth
subdivision basis functions have the continuity property required for the
Kirchhoff-Love formulation and are highly efficient for the acoustic field
computations. We validate the proposed isogeometric formulation through a
closed-form solution of acoustic scattering over a thin shell sphere.
Furthermore, we demonstrate the ability of the proposed approach to handle
complex geometries with arbitrary topology that provides an integrated
isogeometric design and analysis workflow for coupled structural-acoustic
analysis of shells
Applications of MLPG_R & Sale/QALE-Fem for Wave - Structure Interactions
Source: ICHE Conference Archive - https://mdi-de.baw.de/icheArchiv
- …