96 research outputs found
Innovative Adaptive Techniques for Multi Channel Spaceborne SAR Systems
Synthetic Aperture Radar (SAR) is a well-known technology which allows to coherently combine
multiple returns from (typically) ground-based targets from a moving radar mounted either on an airborne
or on a space-borne vehicle. The relative motion between the targets on ground and the platform
causes a Doppler effect, which is exploited to discriminate along-track positions of targets themselves.
In addition, as most of conventional radar, a pulsed wide-band waveform is transmitted periodically,
thus allowing even a radar discrimination capability in the range direction (i.e. in distance).
For side-looking acquisition geometries, the along-track and the range directions are almost
orthogonal, so that the two dimensional target discrimination capabiliy results in the possibility to
produce images of the illuminated area on ground. A side-looking geometry consists in the radar
antenna to be, either mechanically or electronically, oriented perpendicular to the observed area.
Nowadays technology allows discrimination capability (also referred to as resolution) in both alongtrack
and range directions in the order of few tenths of centimeters.
Since the SAR is a microwave active sensor, this technology assure the possibility to produce images
of the terrain independently of the sunlight illumination and/or weather conditions. This makes the SAR
a very useful instrument for monitoring and mapping both the natural and the artificial activities over
the Earth’s surface. Among all the limitations of a single-channel SAR system, this work focuses over some of them
which are briefly listed below:
a) the performance achievable in terms of resolution are usually paid in terms of system
complexity, dimension, mass and cost;
b) since the SAR is a coherent active sensor, it is vulnerable to both intentionally and unintentionally
radio-frequency interferences which might limit normal system operability;
c) since the Doppler effect it is used to discriminate targets (assumed to be stationary) on the
ground, this causes an intrinsic ambiguity in the interpretation of backscattered returns from
moving targets.
These drawbacks can be easily overcome by resorting to a Multi-cannel SAR (M-SAR) system
Innovative Adaptive Techniques for Multi Channel Spaceborne SAR Systems
Synthetic Aperture Radar (SAR) is a well-known technology which allows to coherently combine
multiple returns from (typically) ground-based targets from a moving radar mounted either on an airborne
or on a space-borne vehicle. The relative motion between the targets on ground and the platform
causes a Doppler effect, which is exploited to discriminate along-track positions of targets themselves.
In addition, as most of conventional radar, a pulsed wide-band waveform is transmitted periodically,
thus allowing even a radar discrimination capability in the range direction (i.e. in distance).
For side-looking acquisition geometries, the along-track and the range directions are almost
orthogonal, so that the two dimensional target discrimination capabiliy results in the possibility to
produce images of the illuminated area on ground. A side-looking geometry consists in the radar
antenna to be, either mechanically or electronically, oriented perpendicular to the observed area.
Nowadays technology allows discrimination capability (also referred to as resolution) in both alongtrack
and range directions in the order of few tenths of centimeters.
Since the SAR is a microwave active sensor, this technology assure the possibility to produce images
of the terrain independently of the sunlight illumination and/or weather conditions. This makes the SAR
a very useful instrument for monitoring and mapping both the natural and the artificial activities over
the Earth’s surface. Among all the limitations of a single-channel SAR system, this work focuses over some of them
which are briefly listed below:
a) the performance achievable in terms of resolution are usually paid in terms of system
complexity, dimension, mass and cost;
b) since the SAR is a coherent active sensor, it is vulnerable to both intentionally and unintentionally
radio-frequency interferences which might limit normal system operability;
c) since the Doppler effect it is used to discriminate targets (assumed to be stationary) on the
ground, this causes an intrinsic ambiguity in the interpretation of backscattered returns from
moving targets.
These drawbacks can be easily overcome by resorting to a Multi-cannel SAR (M-SAR) system
Detection and Localisation Using Light
Visible light communication (VLC) systems have become promising candidates to complement conventional radio frequency (RF) systems due to the increasingly saturated RF spectrum and the potentially high data rates that can be achieved by VLC systems. Furthermore, people detection and counting in an indoor environment has become an emerging and attractive area in the past decade. Many techniques and systems have been developed for counting in public places such as subways, bus stations and supermarkets. The outcome of these techniques can be used for public security, resource allocation and marketing decisions.
This thesis presents the first indoor light-based detection and localisation system that builds on concepts from radio detection and ranging (radar) making use of the expected growth in the use and adoption of visible light communication (VLC), which can provide the infrastructure for our light detection and localisation (LiDAL) system. Our system enables active detection, counting and localisation of people, in addition to being fully compatible with existing VLC systems. In order to detect human (targets), LiDAL uses the visible light spectrum. It sends pulses using a VLC transmitter and analyses the reflected signal collected by an optical receiver. Although we examine the use of the visible spectrum here, LiDAL can be used in the infrared spectrum and other parts of the light spectrum.
We introduce LiDAL with different transmitter-receiver configurations and optimum detectors considering the fluctuation of the received reflected signal from the target in the presence of Gaussian noise. We design an efficient multiple input multiple output (MIMO) LiDAL system with wide field of view (FOV) single photodetector receiver, and also design a multiple input single output (MISO) LiDAL system with an imaging receiver to eliminate ambiguity in target detection and localisation.
We develop models for the human body and its reflections and consider the impact of the colour and texture of the cloth used as well as the impact of target mobility. A number of detection and localisation methods are developed
iii
for our LiDAL system including cross correlation, a background subtraction method and a background estimation method. These methods are considered to distinguish a mobile target from the ambient reflections due to background obstacles (furniture) in a realistic indoor environment
Integrated Sensing and Communications: Recent Advances and Ten Open Challenges
It is anticipated that integrated sensing and communications (ISAC) would be
one of the key enablers of next-generation wireless networks (such as beyond 5G
(B5G) and 6G) for supporting a variety of emerging applications. In this paper,
we provide a comprehensive review of the recent advances in ISAC systems, with
a particular focus on their foundations, system design, networking aspects and
ISAC applications. Furthermore, we discuss the corresponding open questions of
the above that emerged in each issue. Hence, we commence with the information
theory of sensing and communications (SC), followed by the
information-theoretic limits of ISAC systems by shedding light on the
fundamental performance metrics. Next, we discuss their clock synchronization
and phase offset problems, the associated Pareto-optimal signaling strategies,
as well as the associated super-resolution ISAC system design. Moreover, we
envision that ISAC ushers in a paradigm shift for the future cellular networks
relying on network sensing, transforming the classic cellular architecture,
cross-layer resource management methods, and transmission protocols. In ISAC
applications, we further highlight the security and privacy issues of wireless
sensing. Finally, we close by studying the recent advances in a representative
ISAC use case, namely the multi-object multi-task (MOMT) recognition problem
using wireless signals.Comment: 26 pages, 22 figures, resubmitted to IEEE Journal. Appreciation for
the outstanding contributions of coauthors in the paper
Multiple-input Multiple-output Radar Waveform Design Methodologies
Multiple-input multiple-output (MIMO) radar is currently an active area of research. The MIMO techniques have been well studied for communications applications where they offer benefits in multipath fading environments. Partly inspired by these benefits, MIMO techniques are applied to radar and they offer a number of advantages such as improved resolution and sensitivity. It allows the use of transmitting multiple simultaneous waveforms from different phase centers. The employed radar waveform plays a key role in determining the accuracy, resolution, and ambiguity in performing tasks such as determining the target range, velocity, shape, and so on. The excellent performance promised by MIMO radar can be unleashed only by proper waveform design. In this article, a survey on MIMO radar waveform design is presented. The goal of this paper is to elucidate the key concepts of waveform design to encourage further research on this emerging technology.Defence Science Journal, 2013, 63(4), pp.393-401, DOI:http://dx.doi.org/10.14429/dsj.63.253
Development and Evaluation of a Multistatic Ultrawideband Random Noise Radar
This research studies the AFIT noise network (NoNET) radar node design and the feasibility in processing the bistatic channel information of a cluster of widely distributed noise radar nodes. A system characterization is used to predict theoretical localization performance metrics. Design and integration of a distributed and central signal and data processing architecture enables the Matlab®-driven signal data acquisition, digital processing and multi-sensor image fusion. Experimental evaluation of the monostatic localization performance reveals its range measurement error standard deviation is 4.8 cm with a range resolution of 87.2(±5.9) cm. The 16-channel multistatic solution results in a 2-dimensional localization error of 7.7(±3.1) cm and a comparative analysis is performed against the netted monostatic solution. Results show that active sensing with a low probability of intercept (LPI) multistatic radar, like the NoNET, is capable of producing sub-meter accuracy and near meter-resolution imagery
Spatial Parameter Identification for MIMO Systems in the Presence of Non-Gaussian Interference
Reliable identification of spatial parameters for multiple-input multiple-output (MIMO) systems, such as the number of transmit antennas (NTA) and the direction of arrival (DOA), is a prerequisite for MIMO signal separation and detection. Most existing parameter estimation methods for MIMO systems only consider a single parameter in Gaussian noise. This paper develops a reliable identification scheme based on generalized multi-antenna time-frequency distribution (GMTFD) for MIMO systems with non-Gaussian interference and Gaussian noise. First, a new generalized correlation matrix is introduced to construct a generalized MTFD matrix. Then, the covariance matrix based on time-frequency distribution (CM-TF) is characterized by using the diagonal entries from the auto-source signal components and the non-diagonal entries from the cross-source signal components in the generalized MTFD matrix. Finally, by making use of the CM-TF, the Gerschgorin disk criterion is modified to estimate NTA, and the multiple signal classification (MUSIC) is exploited to estimate DOA for MIMO system. Simulation results indicate that the proposed scheme based on GMTFD has good robustness to non-Gaussian interference without prior information and that it can achieve high estimation accuracy and resolution at low and medium signal-to-noise ratios (SNRs)
MIMO Radar Target Localization and Performance Evaluation under SIRP Clutter
Multiple-input multiple-output (MIMO) radar has become a thriving subject of
research during the past decades. In the MIMO radar context, it is sometimes
more accurate to model the radar clutter as a non-Gaussian process, more
specifically, by using the spherically invariant random process (SIRP) model.
In this paper, we focus on the estimation and performance analysis of the
angular spacing between two targets for the MIMO radar under the SIRP clutter.
First, we propose an iterative maximum likelihood as well as an iterative
maximum a posteriori estimator, for the target's spacing parameter estimation
in the SIRP clutter context. Then we derive and compare various
Cram\'er-Rao-like bounds (CRLBs) for performance assessment. Finally, we
address the problem of target resolvability by using the concept of angular
resolution limit (ARL), and derive an analytical, closed-form expression of the
ARL based on Smith's criterion, between two closely spaced targets in a MIMO
radar context under SIRP clutter. For this aim we also obtain the non-matrix,
closed-form expressions for each of the CRLBs. Finally, we provide numerical
simulations to assess the performance of the proposed algorithms, the validity
of the derived ARL expression, and to reveal the ARL's insightful properties.Comment: 34 pages, 12 figure
Beyond the spatio-temporal limits of atmospheric radars: inverse problem techniques and MIMO systems
The Earth’s upper atmosphere (UA) is a highly dynamic region dominated by atmospheric waves and stratified turbulence covering a wide range of spatio-temporal scales. A comprehensive study of the UA requires measurements over a broad range of frequencies and spatial wavelengths, which are prohibitively costly. To improve the understanding of the UA, an investment in efficient and large observational infrastructures is required. This work investigates remote sensing techniques based on MIMO and inverse problems techniques to improve the capabilities of current atmospheric radars
- …