Cell identity allocation and optimisation of handover parameters in self-organised LTE femtocell networks

A thesis submitted to the University of Bedfordshire in partial ful lment of the requirements for the degree of Doctor of PhilosophyFemtocell is a small cellular base station used by operators to extend indoor service coverage and enhance overall network performance. In Long Term Evolution (LTE), femtocell works under macrocell coverage and combines with the macrocell to constitute the two-tier network. Compared to the traditional single-tier network, the two-tier scenario creates many new challenges, which lead to the 3rd Generation Partnership Project (3GPP) implementing an automation technology called Self-Organising Network (SON) in order to achieve lower cost and enhanced network performance. This thesis focuses on the inbound and outbound handovers (handover between femtocell and macrocell); in detail, it provides suitable solutions for the intensity of femtocell handover prediction, Physical Cell Identity (PCI) allocation and handover triggering parameter optimisation. Moreover, those solutions are implemented in the structure of SON. In order to e ciently manage radio resource allocation, this research investigates the conventional UE-based prediction model and proposes a cell-based prediction model to predict the intensity of a femtocell's handover, which overcomes the drawbacks of the conventional models in the two-tier scenario. Then, the predictor is used in the proposed dynamic group PCI allocation approach in order to solve the problem of PCI allocation for the femtocells. In addition, based on SON, this approach is implemented in the structure of a centralised Automated Con guration of Physical Cell Identity (ACPCI). It overcomes the drawbacks of the conventional method by reducing inbound handover failure of Cell Global Identity (CGI). This thesis also tackles optimisation of the handover triggering parameters to minimise handover failure. A dynamic hysteresis-adjusting approach for each User Equipment (UE) is proposed, using received average Reference Signal-Signal to Interference plus Noise Ratio (RS-SINR) of the UE as a criterion. Furthermore, based on SON, this approach is implemented in the structure of hybrid Mobility Robustness Optimisation (MRO). It is able to off er the unique optimised hysteresis value to the individual UE in the network. In order to evaluate the performance of the proposed approach against existing methods, a System Level Simulation (SLS) tool, provided by the Centre for Wireless Network Design (CWiND) research group, is utilised, which models the structure of two-tier communication of LTE femtocell-based networks

Identification of femtocells in mobile networks

The evolving mobile networks are requested to convey increasing data traffic as popularity of online services together with affordability of mobile devices is growing. One solution to mobile carriers, which can help them quickly deploy small base stations (BS) ensuring great indoor coverage with minimum costs, and high data rate capability, is femtocell technology. However, standard deployment techniques are unsatisfactory for these type of BSs. There are two main reasons for that. Firstly, femtocells will be deployed in great numbers. Secondly, they are deployed by users and are portable. It means their position is not known in advance, and can vary in time. Therefore, femtocells have to implement self-configuration principles. Physical Cell Identity is one of the most important parameters to be chosen automatically under defined conditions. It is crucial parameter, which allows them to convey a communication between a user equipment and a core network. A study on Physical Cell Identity issues in mobile networks with femtocells is presented in my thesis. For this purpose, I created two different models of femtocells deployment and deal with a collision and a confusion. They are two main problems, which threaten proper Physical Cell Identity assignment in mobile networks. Outputs of the thesis serves for better understanding of interrelations between differently placed femtocells in term of collision and confusion issue and as the basis to design the framework handling Physical Cell Identity allocation. The simulations conducted on proposed models were utilized to obtain probability characteristics and indicators based on graph theory. In the evaluation section, I appoint several characteristics as probability of collision, probability of confusion and maximal number of neighbourhood cells and some others to support solution of collision and confusion issue. I use results of evaluation and layout the framework for automated Physical Cell Identity assignment with two different approaches, the distributed one, and the centralized one. Since, femtocells are subcategory of small cells so findings, mentioned in this thesis, can also be used for other types of small cells.Katedra telekomunikační technik

A cell outage management framework for dense heterogeneous networks

In this paper, we present a novel cell outage management (COM) framework for heterogeneous networks with split control and data planes-a candidate architecture for meeting future capacity, quality-of-service, and energy efficiency demands. In such an architecture, the control and data functionalities are not necessarily handled by the same node. The control base stations (BSs) manage the transmission of control information and user equipment (UE) mobility, whereas the data BSs handle UE data. An implication of this split architecture is that an outage to a BS in one plane has to be compensated by other BSs in the same plane. Our COM framework addresses this challenge by incorporating two distinct cell outage detection (COD) algorithms to cope with the idiosyncrasies of both data and control planes. The COD algorithm for control cells leverages the relatively larger number of UEs in the control cell to gather large-scale minimization-of-drive-test report data and detects an outage by applying machine learning and anomaly detection techniques. To improve outage detection accuracy, we also investigate and compare the performance of two anomaly-detecting algorithms, i.e., k-nearest-neighbor- and local-outlier-factor-based anomaly detectors, within the control COD. On the other hand, for data cell COD, we propose a heuristic Grey-prediction-based approach, which can work with the small number of UE in the data cell, by exploiting the fact that the control BS manages UE-data BS connectivity and by receiving a periodic update of the received signal reference power statistic between the UEs and data BSs in its coverage. The detection accuracy of the heuristic data COD algorithm is further improved by exploiting the Fourier series of the residual error that is inherent to a Grey prediction model. Our COM framework integrates these two COD algorithms with a cell outage compensation (COC) algorithm that can be applied to both planes. Our COC solution utilizes an actor-critic-based reinforcement learning algorithm, which optimizes the capacity and coverage of the identified outage zone in a plane, by adjusting the antenna gain and transmission power of the surrounding BSs in that plane. The simulation results show that the proposed framework can detect both data and control cell outage and compensate for the detected outage in a reliable manner

ReSCon '12, Research Student Conference: Book of Abstracts

The fifth SED Research Student Conference (ReSCon2012) was hosted over three days, 18-20 June 2012, in the Hamilton Centre at Brunel University. The conference consisted of 130 oral and 70 poster presentations, based on the high quality and diverse research being conducted within the School of Engineering and Design by postgraduate research students. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

Practical design of optimal wireless metropolitan area networks: model and algorithms for OFDMA networks

A thesis submitted to the University of Bedfordshire, in partial fulfilment of the requirements for the degree of Ph.D.This thesis contributes to the study of the planning and optimisation of wireless metropolitan area networks, in particular to the access network design of OFDMAbased systems, where different parameters like base station position, antenna tilt and azimuth need to be configured during the early stages of the network life. A practical view for the solution of this problem is presented by means of the development of a novel design framework and the use of multicriteria optimisation. A further consideration of relaying and cooperative communications in the context of the design of this kind of networks is done, an area little researched. With the emergence of new technologies and services, it is very important to accurately identify the factors that affect the design of the wireless access network and define how to take them into account to achieve optimally performing and cost-efficient networks. The new features and flexibility of OFDMA networks seem particularly suited to the provision of different broadband services to metropolitan areas. However, until now, most existing efforts have been focused on the basic access capability networks. This thesis presents a way to deal with the trade-offs generated during the OFDMA access network design, and presents a service-oriented optimization framework that offers a new perspective for this process with consideration of the technical and economic factors. The introduction of relay stations in wireless metropolitan area networks will bring numerous advantages such as coverage extension and capacity enhancement due to the deployment of new cells and the reduction of distance between transmitter and receiver. However, the network designers will also face new challenges with the use of relay stations, since they involve a new source of interference and a complicated air interface; and this need to be carefully evaluated during the network design process. Contrary to the well known procedure of cellular network design over regular or hexagonal scenarios, the wireless network planning and optimization process aims to deal with the non-uniform characteristics of realistic scenarios, where the existence of hotspots, different channel characteristics for the users, or different service requirements will determine the final design of the wireless network. This thesis is structured in three main blocks covering important gaps in the existing literature in planning (efficient simulation) and optimisation. The formulation and ideas proposed in the former case can still be evaluated over regular scenarios, for the sake of simplicity, while the study of latter case needs to be done over specific scenarios that will be described when appropriate. Nevertheless, comments and conclusions are extrapolated to more general cases throughout this work. After an introduction and a description of the related work, this thesis first focuses on the study of models and algorithms for classical point-to-multipoint networks on Chapter 3, where the optimisation framework is proposed. Based on the framework, this work: - Identifies the technology-specific physical factors that affect most importantly the network system level simulation, planning and optimization process. - It demonstrates how to simplify the problem and translate it into a formal optimization routine with consideration of economic factors. - It provides the network provider, a detailed and clear description of different scenarios during the design process so that the most suitable solution can be found. Existing works on this area do not provide such a comprehensive framework. In Chapter 4: - The impact of the relay configuration on the network planning process is analysed. - A new simple and flexible scheme to integrate multihop communications in the Mobile WiMAX frame structure is proposed and evaluated. - Efficient capacity calculations that allow intensive system level simulations in a multihop environment are introduced. In Chapter 5: - An analysis of the optimisation procedure with the addition of relay stations and the derived higher complexity of the process is done. - A frequency plan procedure not found in the existing literature is proposed, which combines it with the use of the necessary frame fragmentation of in-band relay communications and cooperative procedures. - A novel joint two-step process for network planning and optimisation is proposed. Finally, conclusions and open issues are exposed

Extending cloud-based applications in challenged environments with mobile opportunistic networks

With the tremendous growth of mobile devices, e.g, smartphones, tablets and PDAs in recent years, users are looking for more advanced platforms in order to use their computational applications (e.g., processing and storage) in a faster and more convenient way. In addition, mobile devices are capable of using cloud-based applications and the use of such technology is growing in popularity. However, one major concern is how to efficiently access these cloud-based applications when using a resource-constraint mobile device. Essentially applications require a continuous Internet connection which is difficult to obtain in challenged environments that lack an infrastructure for communication (e.g., in sparse or rural areas) or areas with infrastructure (e.g., urban or high density areas) with restricted/full of interference access networks and even areas with high costs of Internet roaming. In these situations the use of mobile opportunistic networks may be extended to avail cloud-based applications to the user. In this thesis we explore the emergence of extending cloud-based applications with mobile opportunistic networks in challenged environments and observe how local user’s social interactions and collaborations help to improve the overall message delivery performance in the network. With real-world trace-driven simulations, we compare and contrast the different user’s behaviours in message forwarding, the impact of the various network loads (e.g., number of messages) along with the long-sized messages and the impact of different wireless networking technologies, in various opportunistic routing protocols in a challenged environment