DMSK: A practical 2400-bps receiver for the mobile satellite service: An MSAT-X Report

The partical aspects of a 2400-bps differential detection minimum-shift-keying (DMSK) receiver are investigated. Fundamental issues relating to hardware precision, Doppler shift, fading, and frequency offset are examined, and it is concluded that the receiver's implementation at baseband is more advantageous both in cost and simplicity than its IF implementation. The DMSK receiver has been fabricated and tested under simulated mobile satellite environment conditions. The measured receiver performance in the presence of anomalies pertinent to the link is presented in this report. Furthermore, the receiver behavior in a band-limited channel (GMSK) is also investigated. The DMSK receiver performs substantially better than a coherent minimum-shift-keying (MSK) receiver in a heavily fading environment. The DMSK radio is simple and robust, and results in a lower error floor than its coherent counterpart. Moreover, this receiver is suitable for burst-type signals, and its recovery from deep fades is fast

Study of continuous-phase four-state modulation for cordless telecommunications. Assessment by simulation of CP-QFSK as an alternative modulation scheme for TDMA digital cordless telecommunications systems operating in indoor applications

One of the major driving elements behind the explosive boom in wireless revolution is the advances in the field of modulation which plays a fundamental role in any communication system, and especially in cellular radio systems. Hence, the elaborate choice of an efficient modulation scheme is of paramount importance in the design and employment of any communications system. Work presented in this thesis is an investigation (study) of the feasibility of whether multilevel FSK modulation scheme would provide a viable alternative modem that can be employed in TDMA cordless communications systems. In the thesis the design and performance analysis of a non-coherent multi-level modem that offers a great deal of bandwidth efficiency and hardware simplicity is studied in detail. Simulation results demonstrate that 2RC pre-modulation filter pulse shaping with a modulation index of 0.3, and pre-detection filter normalized equivalent noise bandwidth of 1.5 are optimum system parameter values. Results reported in chapter 5 signify that an adjacent channel rejection factor of around 40 dB has been achieved at channel spacing of 1.5 times the symbol rate while the DECT system standards stipulated a much lower rejection limit criterion (25-30dB), implying that CP-QFSK modulation out-performs the conventional GMSK as it causes significantly less ACI, thus it is more spectrally efficient in a multi-channel system. However, measured system performance in terms of BER indicates that this system does not coexist well with other interferers as at delay spreads between 100ns to 200ns, which are commonly encountered in such indoor environment, a severe degradation in system performance apparently caused by multi-path fading has been noticed, and there exists a noise floor of about 40 dB, i.e. high irreducible error rate of less than 5.10-3. Implementing MRC diversity combiner and BCH codec has brought in a good gain.Higher Education Ministr

Secure mobile radio communication over narrowband RF channel.

by Wong Chun Kau, Jolly.Thesis (M.Phil.)--Chinese University of Hong Kong, 1992.Includes bibliographical references (leaves 84-88).ABSTRACT --- p.1ACKNOWLEDGEMENT --- p.3Chapter 1. --- INTRODUCTION --- p.7Chapter 1.1 --- Land Mobile Radio (LMR) CommunicationsChapter 1.2 --- Paramilitary Communications SecurityChapter 1.3 --- Voice Scrambling MethodsChapter 1.4 --- Digital Voice EncryptionChapter 1.5 --- Digital Secure LMRChapter 2. --- DESIGN GOALS --- p.20Chapter 2.1 --- System Concept and ConfigurationChapter 2.2 --- Operational RequirementsChapter 2.2.1 --- Operating conditionsChapter 2.2.2 --- Intelligibility and speech qualityChapter 2.2.3 --- Field coverage and transmission delayChapter 2.2.4 --- Reliability and maintenanceChapter 2.3 --- Functional RequirementsChapter 2.3.1 --- Major system featuresChapter 2.3.2 --- Cryptographic featuresChapter 2.3.3 --- Phone patch facilityChapter 2.3.4 --- Mobile data capabilityChapter 2.4 --- Bandwidth RequirementsChapter 2.5 --- Bit Error Rate RequirementsChapter 3. --- VOICE CODERS --- p.38Chapter 3.1 --- Digital Speech Coding MethodsChapter 3.1.1 --- Waveform codingChapter 3.1.2 --- Linear predictive codingChapter 3.1.3 --- Sub-band codingChapter 3.1.4 --- VocodersChapter 3.2 --- Performance EvaluationChapter 4. --- CRYPTOGRAPHIC CONCERNS --- p.52Chapter 4.1 --- Basic Concepts and CryptoanalysisChapter 4.2 --- Digital Encryption TechniquesChapter 4.3 --- Crypto SynchronizationChapter 4.3.1 --- Auto synchronizationChapter 4.3.2 --- Initial synchronizationChapter 4.3.3 --- Continuous synchronizationChapter 4.3.4 --- Hybrid synchronizationChapter 5. --- DIGITAL MODULATION --- p.63Chapter 5.1 --- Narrowband Channel RequirementsChapter 5.2 --- Narrowband Digital FMChapter 5.3 --- Performance EvaluationChapter 6. --- SYSTEM IMPLEMENTATION --- p.71Chapter 6.1 --- Potential EMC ProblemsChapter 6.2 --- Frequency PlanningChapter 6.3 --- Key ManagementChapter 6.4 --- Potential Electromagnetic Compatibility (EMC) ProblemsChapter 7. --- CONCLUSION --- p.80LIST OF ILLUSTRATIONS --- p.81REFERENCES --- p.82APPENDICES --- p.89Chapter I. --- Path Propagation Loss(L) Vs Distance (d)Chapter II. --- Speech Quality Assessment Tests performedby Special Duties Unit (SDU

Synchronisation in sampled receivers for narrowband digital modulation schemes.

SIGLEAvailable from British Library Document Supply Centre- DSC:DXN0033576 / BLDSC - British Library Document Supply CentreGBUnited Kingdo