Maximizing signal to leakage ratios in MIMO BCH cooperative beamforming scheme

Beamforming (BF) technique in cooperative multiple input multiple output (MIMO) antenna arrays improves signal to noise ratio (SNR) of the intended user. The challenge is to design transmit beamforming vectors for every user while limiting the co-channel interference (CCI) from other users. In this paper, we proposed cooperative beamforming based on Signal-to-Leakage Ratio (SLR) to exploit the leakage power as a useful power in the second time slot after user cooperation, for this purpose successive interference cancellation (SIC) is employed in each user to separate the leakage signal from the desired signal. Without increasing the complexity, Maximizing Signal-to-Leakage Ratio (SLR) subject to proposed power constraint instead of a unity norm is the way to achieve extra leakage power. To reduce the erroneous, Bose–Chaudhuri–Hocquenghem (BCH) codes employed in Beamforming of (SIC) cooperative scheme BF(CS-SIC-BCH). Maximum-likelihood (ML) estimator method is used at each user receiver. Simulation results show that the performance of the proposed scheme BF (CS-SIC-BCH) over Rayleigh and Rician fading channel is significantly better than the performance beamforming based on SLR in Non-cooperative system. More specifically to achieve a BER of about the required SNR for the proposed scheme is about 1 dB less than the Non-cooperative system

非直交多元接続のための高信頼空間変調

　マルチユーザ空間変調（SM: Spatial Modulation）では，SM信号の疎性を用いた圧縮センシングによるマルチユーザ検出が研究されているものの，受信機においてチャネル情報が完全に既知であるという条件の下で議論されている．実際には受信機側でチャネル情報を推定し，推定したチャネル情報を用いて復調処理を行う．推定したチャネル情報の精度は復調の精度に影響を及ぼすため，チャネル推定は重要なものであり考慮しなければならない．　そこで本研究ではチャネル推定を，ブロックスパース性を有する信号の再構成問題として扱い，ブロックスパース性を考慮した複素数近似メッセージ伝播法（BS-CAMP: Block-Sparse Complex Approximate Message Passing）によって信号の再構成を行う方法を提案する．BS-CAMPは受信機が送信信号に含まれる非零要素の個数を事前に知る必要がない再構成アルゴリズムとなっており，ランダムアクセス方式にも適用可能である．計算機シミュレーションより，BS-CAMPによるチャネル推定の精度やスループット特性への影響を示す．　さらに，高信頼な通信を実現するにはチャネル推定だけでなく誤り訂正符号が重要となる．そこで併せて本研究ではSMに誤り訂正符号化を組み合わせたものの一つである，ターボトレリス符号化空間変調（SM-TTC: SM with Turbo Trellis-Coding）における符号の最適化及び性能解析を行った．具体的には，シンボルベースEXIT（Extrinsic Information Transfer）チャートを用いた低演算符号探索法によって，演算量を低減しながら最良の特性を示す符号を探索する．計算機シミュレーションより，探索した符号を用いたSM-TTCが従来のものよりも優れていること，および提案手法が従来の符号探索法よりも低計算量で符号探索が可能であることを示す．電気通信大学201

Fast Power Allocation Algorithms for Adaptive MIMO Systems.

Recent research results have shown that the MIMO wireless communication architecture is a promising approach to achieve high bandwidth efficiencies. MIMO wireless channels can be simply defined as a link for which both the transmitting and receiving ends are equipped with multiple antenna elements. Adaptive modulation and power allocation could be used to further improve the performance of MIMO systems. This thesis focuses on developing a fast and high performance power allocation algorithm. Three power allocation algorithms are proposed in this thesis and their performances are compared in various system sizes and transceiver architectures. Among the three algorithms proposed in this thesis, the fast algorithm may be considered as the best power allocation algorithm since the performance of the fast algorithm is almost as good as the fullsearch (optimal)algorithm and the mean processing time is considerably less than the fullsearch algorithm. The fast algorithm achieves about 97.6% agreement with the optimal throughput on average. In addition, the time taken to find the power scaling factors using the fullsearch algorithm is about 2300 times longer than the processing time of the fast algorithm in a 6 x 6 system when the SNR is 20dB. As an extension to the power allocation process, excess power allocation methods are introduced. Excess power is the unused power during the power allocation process. The power allocation algorithm allocates power to each received SNR to maximize the throughput of the system whereas the excesspower allocation distributes the excess power to each SNR to improve both the instantaneous and temporal behavior of the system. Five different excess power allocation methods are proposed in this thesis. These methods were simulated in the Rayleigh fading channel with different Doppler frequencies, fD = 10Hz,50Hz and 100Hz, where the ACF of the channel coefficients are given by the Jakes' model. The equal BER improvement method showed a slightly better performance than the other methods. The equal BER improvement method enables the system to maintain the power scaling factors without sacrificing QoS for 19.6 ms on average when the maximum Doppler shift is 10Hz

Diversity receiver design and channel statistic estimation in fading channels

The main goal of this thesis is to provide an in-depth study of two important techniques that are effective in improving the performance, data rate, or bandwidth-efficiency in wireless communication systems. The two techniques are, first, diversity combining equipped with quadrature amplitude modulation (QAM), and second, the estimation of fading channel statistical properties;To effectively combat the adverse effect of fading and to improve the error rate performance in wireless communications, one of the major approaches is to employ diversity combining techniques. In the first part of this thesis, we focus on the equal gain combining (EGC) and hybrid-selection equal gain combining (HS/EGC) for bandwidth-efficient wireless systems (i.e. QAM systems). For EGC QAM systems, we propose the receiver structure and the corresponding decision variables, and then study the effects of imperfect channel estimation (ICE) and quantify the loss of the signal-to-noise ratio (SNR) gain caused by ICE. For HS/EGC QAM system, we develop a general approach to derive unified error rate and outage probability formulas over various types of fading channels based on the proposed HS/EGC receiver. The main contribution of this work lies in that it provides effective hybrid diversity schemes and new analytical approaches to enable thorough analysis and effective design of bandwidth efficient wireless communication systems which suffer from ICE and operate in realistic multipath channels;Channel statistic information is proven to be critical in determining the systems design, achievable data rate, and achievable performance. In the second part of this thesis, we study the estimation of the fading channel Statistics and Probability; We propose several iterative algorithms to estimate the first- and second-order statistics of general fading or composite fading-shadowing channels and derive the Cramer-Rao bounds (CRBs) for all the cases. We demonstrate that these iterative methods are efficient in the sense that they achieve their corresponding CRBs. The main contribution of this work is that it bridges the gap between the broad utilization of fading channel statistical properties and the lack of systematic study that makes such statistical properties available

High capacity multiuser multiantenna communication techniques

One of the main issues involved in the development of future wireless communication systems is the multiple access technique used to efficiently share the available spectrum among users. In rich multipath environment, spatial dimension can be exploited to meet the increasing number of users and their demands without consuming extra bandwidth and power. Therefore, it is utilized in the multiple-input multiple-output (MIMO) technology to increase the spectral efficiency significantly. However, multiuser MIMO (MU-MIMO) systems are still challenging to be widely adopted in next generation standards. In this thesis, new techniques are proposed to increase the channel and user capacity and improve the error performance of MU-MIMO over Rayleigh fading channel environment. For realistic system design and performance evaluation, channel correlation is considered as one of the main channel impurities due its severe influence on capacity and reliability. Two simple methods called generalized successive coloring technique (GSCT) and generalized iterative coloring technique (GICT) are proposed for accurate generation of correlated Rayleigh fading channels (CRFC). They are designed to overcome the shortcomings of existing methods by avoiding factorization of desired covariance matrix of the Gaussian samples. The superiority of these techniques is demonstrated by extensive simulations of different practical system scenarios. To mitigate the effects of channel correlations, a novel constellation constrained MU-MIMO (CC-MU-MIMO) scheme is proposed using transmit signal design and maximum likelihood joint detection (MLJD) at the receiver. It is designed to maximize the channel capacity and error performance based on principles of maximizing the minimum Euclidean distance (dmin) of composite received signals. Two signal design methods named as unequal power allocation (UPA) and rotation constellation (RC) are utilized to resolve the detection ambiguity caused by correlation. Extensive analysis and simulations demonstrate the effectiveness of considered scheme compared with conventional MU-MIMO. Furthermore, significant gain in SNR is achieved particularly in moderate to high correlations which have direct impact to maintain high user capacity. A new efficient receive antenna selection (RAS) technique referred to as phase difference based selection (PDBS) is proposed for single and multiuser MIMO systems to maximize the capacity over CRFC. It utilizes the received signal constellation to select the subset of antennas with highest (dmin) constellations due to its direct impact on the capacity and BER performance. A low complexity algorithm is designed by employing the Euclidean norm of channel matrix rows with their corresponding phase differences. Capacity analysis and simulation results show that PDBS outperforms norm based selection (NBS) and near to optimal selection (OS) for all correlation and SNR values. This technique provides fast RAS to capture most of the gains promised by multiantenna systems over different channel conditions. Finally, novel group layered MU-MIMO (GL-MU-MIMO) scheme is introduced to exploit the available spectrum for higher user capacity with affordable complexity. It takes the advantages of spatial difference among users and power control at base station to increase the number of users beyond the available number of RF chains. It is achieved by dividing the users into two groups according to their received power, high power group (HPG) and low power group (LPG). Different configurations of low complexity group layered multiuser detection (GL-MUD) and group power allocation ratio (η) are utilized to provide a valuable tradeoff between complexity and overall system performance. Furthermore, RAS diversity is incorporated by using NBS and a new selection algorithm called HPG-PDBS to increase the channel capacity and enhance the error performance. Extensive analysis and simulations demonstrate the superiority of proposed scheme compared with conventional MU-MIMO. By using appropriate value of (η), it shows higher sum rate capacity and substantial increase in the user capacity up to two-fold at target BER and SNR values

Wireless multiuser communication systems: diversity receiver performance analysis, GSMuD design, and fading channel simulator

Multipath fading phenomenon is central to the design and analysis of wireless communication systems including multiuser systems. If untreated, the fading will corrupt the transmitted signal and often cause performance degradations such as increased communication error and decreased data rate, as compared to wireline channels with little or no multipath fading. On the other hand, this multipath fading phenomenon, if fully utilized, can actually lead to system designs that provide additional gains in system performance as compared to systems that experience non-fading channels.;The central question this thesis tries to answer is how to design and analyze a wireless multiuser system that takes advantage of the benefits the diversity multipath fading channel provides. Two particular techniques are discussed and analyzed in the first part of the thesis: quadrature amplitude modulation (QAM) and diversity receivers, including maximal ratio combining (MRC) and generalized selection combining (GSC). We consider the practical case of imperfect channel estimation (ICE) and develop a new decision variable (DV) of MRC receiver output for M-QAM. By deriving its moment generating function (MGF), we obtain the exact bit error rate (BER) performance under arbitrary correlated Rayleigh and Rician channels, with ICE. GSC provides a tradeoff between receiver complexity and performance. We study the effect of ICE on the GSC output effective SNR under generalized fading channels and obtain the exact BER results for M-QAM systems. The significance of this part lies in that these results provide system designers means to evaluate how different practical channel estimators and their parameters can affect the system\u27s performance and help them distribute system resources that can most effectively improve performance.;In the second part of the thesis, we look at a new diversity technique unique to multiuser systems under multipath fading channels: the multiuser diversity. We devise a generalized selection multiuser diversity (GSMuD) scheme for the practical CDMA downlink systems, where users are selected for transmission based on their respective channel qualities. We include the effect of ICE in the design and analysis of GSMuD. Based on the marginal distribution of the ranked user signal-noise ratios (SNRs), we develop a practical adaptive modulation and coding (AMC) scheme and equal power allocation scheme and statistical optimal 1-D and 2-D power allocation schemes, to fully exploit the available multiuser diversity. We use the convex optimization procedures to obtain the 1-D and 2-D power allocation algorithms, which distribute the total system power in the waterfilling fashion alone the user (1-D) or both user and time (2-D) for the power-limited and energy-limited system respectively. We also propose a normalized SNR based GSMuD scheme where user access fairness issues are explicitly addressed. We address various fairness-related performance metrics such as the user\u27s average access probability (AAP), average access time (AAT), and average wait time (AWT) in the absolute- and normalized-SNR based GSMuD. These metrics are useful for system designers to determine parameters such as optimal packet size and delay constraints.;We observe that Nakakagami-m fading channel model is widely applied to model the real world multipath fading channels of different severity. In the last part of the thesis, we propose a Nakagami-m channel simulator that can generate accurate channel coefficients that follow the Nakagami-m model, with independent quadrature parts, accurate phase distribution and arbitrary auto-correlation property. We demonstrate that the proposed simulator can be extremely useful in simulations involving Nakagami-m fading channel models, evident from the numerous simulation results obtained in earlier parts of the thesis where the fading channel coefficients are generated using this proposed simulator

Performance investigation of spatial modulation systems under realistic channel models

In order to fulfil the explosive demand for convenient wireless data access, novel wireless technologies such as the multiple-input-multiple-output (MIMO) have widely been used to improve the link reliability and capacity of wireless communication systems. In recent years, a new MIMO technology named the spatial modulation (SM) has attracted signi cant research interest due to its reported enhancement on the system performance with the reasonable system complexity. Before a new technology comes into real use, it is necessary to comprehensively evaluate its performance under different scenarios. In this thesis, we investigate the performance of SM systems under some important realistic scenarios for future wireless communications, such as the vehicle-to-vehicle (V2V), the high-speed train (HST), and the massive MIMO scenarios. Firstly, the bit error rate (BER) performance of SM systems under a novel threedimensional (3D) geometry based stochastic model (GBSM) for V2V MIMO channels is investigated by both theoretical analysis and system simulations. The impacts of vehicle tra c density (VTD), Doppler effect, and 3D feature on the BER performance of SM systems are thoroughly studied. In addition, other MIMO technologies, such as the vertical Bell Labs layered space-time (V-BLAST), the Alamouti scheme are compared with SM under different simulation settings. Secondly, the BER performance of SM systems is studied under a non-stationary wideband HST GBSM considering the non-ideal channel estimation case. The timevarying behaviour of the channel and its impact on the performance of SM systems are comprehensively investigated. The accurate theoretical BER expression of SM systems under a non-stationary wideband HST channels with non-ideal channel estimation is derived. A novel statistic property named stationary interval in terms of the space-time correlation function (STCF) is introduced in order to clearly explain all theoretical and simulation results. Thirdly, the performance of SM systems is evaluated under a Kroneck-based massive MIMO channel model. As a massive MIMO system employs large numbers of antennas, antenna elements are distributed over a wide range. Thus, different antenna elements may observe different sets of clusters. How this phenomenon affects the performance of SM systems is investigated by considering a survival probability of clusters, which abstracts the birth-death process of each cluster in the channel model. Moreover, the performance of SM systems is also compared with that of other MIMO technologies under the massive MIMO channel model. In summary, all research works in this thesis have considered realistic MIMO channel models, which are meaningful for the test, performance evaluation, and implementation of SM technology for future advanced wireless communications systems

Two–Way Relaying Communications with OFDM and BICM/BICM-ID

Relay-aided communication methods have gained strong interests in academic community and been applied in various wireless communication scenarios. Among different techniques in relay-aided communication system, two-way relaying communication (TWRC) achieves the highest spectral efficiency due to its bi-directional transmission capability. Nevertheless, different from the conventional point-to-point communication system, TWRC suffers from detection quality degradation caused by the multiple-access interference (MAI). In addition, because of the propagation characteristics of wireless channels, fading and multipath dispersion also contribute strongly to detection errors. Therefore, this thesis is mainly concerned with designing transmission and detection schemes to provide good detection quality of TWRC while taking into account the negative impacts of fading, multipath dispersion and multiple-access interference. First, a TWRC system operating over multipath fading channels is considered and orthogonal frequency-division multiplexing (OFDM) is adopted to handle the inter-symbol interference (ISI) caused by the multipath dispersion. In particular, adaptive physical-layer network coding (PNC) is employed to address the MAI issue. By analyzing the detection error probability, various adaptive PNC schemes are discussed for using with OFDM and the scheme achieving the best trade-off among performance, overhead and complexity is suggested. In the second part of the thesis, the design of distributed precoding in TWRC using OFDM under multipath fading channels is studied. The objective is to design a distributed precoding scheme which can alleviate MAI and achieve multipath diversity to combat fading. Specifically, three types of errors are introduced when analyzing the error probability in the multiple access (MA) phase. Through analysis and simulation, the scheme that performs precoding in both time and frequency domains is demonstrated to achieve the maximum diversity gains under all types of errors. Finally, the last part of the thesis examines a communication system incorporating forward error correction (FEC) codes. Specifically, bit-interleaved code modulation (BICM) without and with iterative decoding (BICM-ID) are investigated in a TWRC system. Distributed linear constellation precoding (DLCP) is applied to handle MAI and the design of DLCP in a TWRC system using BICM/BICM-ID is discussed. Taking into account the multiple access channel from the terminal nodes to the relay node, decoding based on the quaternary code representation is introduced. Several error probability bounds are derived to aid in the design of DLCP. Based on these bounds, optimal parameters of DLCP are obtained through analysis and computer search. It is also found that, by combining XORbased network coding with successful iterative decoding, the MAI is eliminated and thus DLCP is not required in a BICM-ID system

Secrecy Performance Analysis of Location-Based Beamforming in Rician Wiretap Channels

We propose a new optimal Location-Based Beamforming (LBB) scheme for the wiretap channel, where both the main channel and the eavesdropper's channel are subject to Rician fading. In our LBB scheme the two key inputs are the location of the legitimate receiver and the location of the potential eavesdropper. Notably, our scheme does not require as direct inputs any channel state information of the main channel or the eavesdropper's channel, making it easy to deploy in a host of application settings in which the location inputs are known. Our beamforming solution assumes a multiple-antenna transmitter, a multiple-antenna eavesdropper, and a single-antenna receiver, and its aim is to maximize the physical layer security of the channel. To obtain our solution we first derive the secrecy outage probability of the LBB scheme in a closed-form expression that is valid for arbitrary values of the Rician K-factors of the main channel and the eavesdropper's channel. Using this expression we then determine the location-based beamformer solution that minimizes the secrecy outage probability. To assess the usefulness of our new scheme, and to quantify the value of the location information to the beamformer, we compare our scheme to other schemes, some of which do not utilize any location information. Our new beamformer solution provides optimal physical layer security for a wide range of location-based applications.Comment: 10 pages, 6 figure

Performance Enhancement by Exploiting the Spatial Domain for Cost, Space and Spectrum Constraint 5G Communication

With everlasting increase of connectivity demand and high speed data communication, lots of progresses have been made to provide a sufficient quality of services (QoS). Several advanced technologies have been the cornerstone of this trend in academia as well as in industry. Nevertheless, there are some implementation challenges, which needs to be closely investigated. In this thesis, among all challenges, we elaborate on those related to number of radio frequency (RF) chains and resource scarcity. The principle idea behind our proposed initial solution is to exploit the spatial domain as an additional degree of freedom. To be more specific, we benefit from spatial domain and antenna index in a multiple-input multiple-output (MIMO) system with dual-polarized (DP) antennas to convey the information. We develop a two-stage algorithm to groups the antennas which ends up to the optimum performance. Another advantage of this proposed algorithm is the complete complexity reduction of exhaustive search over the whole available space. Moreover, due to the continuous growth of demands which results in spectrum scarcity, we investigate the extension of long term evolution (LTE) spectrum. Such a paradigm shift is realized to offload part of the data to unlicensed band, which has been initially dedicated to other standardizations such as wireless local area networks (WLAN). As both LTE and wireless fidelity (Wi-Fi) networks have been widely deployed with solid infrastructures, it is significantly important to make their coexistence viable with a cost-effective approach which inherently requires the minimum protocol modification. Thus, we take the advantage of spatially located multiple antennas of base station (BS) and access point (AP) for the sake of beamforming and interference reduction. In addition to network coexistence, we approach the resource scarcity from the non-orthogonal multiple access (NOMA) point of view, where users share the frequency and time resources and are differentiated in power domain. In particular, we closely consider those users with limited number of RF chains. Similar to our first approach, we utilize spatial modulation (SM) in user end and after evaluating their performance, we propose to consider the capacity of SM NOMA to elaborate the impact of pairing on the achievable sum rate performance