High Gain Magnetically Coupled Single Switch Quadratic Modified SEPIC DC-DC Converter

This article proposes, analyzes, and tests an improved high voltage gain dc-dc converter based on a single-ended primary-inductor converter (SEPIC). The proposed magnetically coupled quadratic modified SEPIC converter (MCQ-MSC) employs a coupled transformer with an optimized design to obtain a high voltage boost factor by controlling the transformer's turn ratio along with the switching duty cycle. Thanks to the unique structure of the coupled transformer, high voltage gain is obtained at low turns ratio, which is highly desirable for high voltage applications and the compact size of the converter. In addition to the coupled transformer, a voltage-boosting module is utilized to achieve a very high output voltage for a low switching duty cycle. The proposed inverter has a single switch with a wide control range of duty cycle (0<D<1), causing low conducting losses and high efficiency. Furthermore, a clamping circuit is successfully designed to remove the leakage inductance effects of the coupled transformer on the power switch. The proposed MCQ-MSC drains a continuous current from the input dc source, which makes it a suitable choice for renewable energy sources (RES). The hardware prototype of the proposed converter is tested to verify the mathematical expressions and theoretical results.acceptedVersionPeer reviewe

An Overview of Power Electronics Applications in Fuel Cell Systems: DC and AC Converters

Power electronics and fuel cell technologies play an important role in the field of renewable energy. The demand for fuel cells will increase as fuel cells become the main power source for portable applications. In this application, a high-efficiency converter is an essential requirement and a key parameter of the overall system. This is because the size, cost, efficiency, and reliability of the overall system for portable applications primarily depend on the converter. Therefore, the selection of an appropriate converter topology is an important and fundamental aspect of designing a fuel cell system for portable applications as the converter alone plays a major role in determining the overall performance of the system. This paper presents a review of power electronics applications in fuel cell systems, which include various topology combinations of DC converters and AC inverters and which are primarily used in fuel cell systems for portable or stand-alone applications. This paper also reviews the switching techniques used in power conditioning for fuel cell systems. Finally, this paper addresses the current problem encountered with DC converters and AC inverter

An Overview of Power Electronics Applications in Fuel Cell Systems: DC and AC Converters

Power electronics and fuel cell technologies play an important role in the field of renewable energy. The demand for fuel cells will increase as fuel cells become the main power source for portable applications. In this application, a high-efficiency converter is an essential requirement and a key parameter of the overall system. This is because the size, cost, efficiency, and reliability of the overall system for portable applications primarily depend on the converter. Therefore, the selection of an appropriate converter topology is an important and fundamental aspect of designing a fuel cell system for portable applications as the converter alone plays a major role in determining the overall performance of the system. This paper presents a review of power electronics applications in fuel cell systems, which include various topology combinations of DC converters and AC inverters and which are primarily used in fuel cell systems for portable or stand-alone applications. This paper also reviews the switching techniques used in power conditioning for fuel cell systems. Finally, this paper addresses the current problem encountered with DC converters and AC inverter

Review on unidirectional non-isolated high gain DC-DC converters for EV sustainable DC fast charging applications

Modern electrical transportation systems require eco-friendly refueling stations worldwide. This has attracted the interest of researchers toward a feasible optimal solution for electric vehicle (EV) charging stations. EV charging can be simply classified as Slow charging (domestic use), Fast charging and Ultrafast charging (commercial use). This study highlights recent advancements in commercial DC charging. The battery voltage varies widely from 36V to 900V according to the EVs. This study focuses on non-isolated unidirectional converters for off-board charging. Various standards and references for fast off-board charging have been proposed. Complete transportation is changed to EVs, which are charged by the grid supply obtained by burning natural fuels, contributing to environmental concerns. Sustainable charging from sustainable energy sources will make future EV completely eco-friendly transportation. The research gap in complete eco-friendly transit is located in interfacing sustainable energy sources and fast DC EV charging. The first step towards clean, eco-friendly transportation is identifying a suitable converter for bridging the research gap in this locality. A simple approach has been made to identify the suitable DC-DC converter for DC fast-charging EVs. This article carefully selected suitable topologies derived from Boost, SEPIC, Cuk, Luo, and Zeta converters for clean EV charging applications. A detailed study on the components count, voltage stress on the controlled and uncontrolled switches, voltage gain obtained, output voltage, power rating of the converters, switching frequency, efficiency obtained, and issues associated with the selected topologies are presented. The outcome of this study is presented as the research challenges or expectations of future converter topologies for charging

A New Soft-Switched High Step-Up Trans-Inverse DC/DC Converter Based on Built-In Transformer

This article proposes a new Zero-Voltage Switching (ZVS) high step-up DC/DC converter based on a built-in transformer for renewable energy applications. The proposed topology utilizes a Three-Winding Built-In Transformer (TWBT) to increase the voltage gain, but unlike most coupled-inductor-based DC-DC converters, high output voltages can be obtained under a lower magnetic turns ratio. In this circuit, with the help of a regenerative active clamp circuit, the energy of the leakage inductor from the TWBT is absorbed and transferred to the output, therefore, the ZVS conditions at turn-on time are achieved for switches. The voltage stresses across the switches of the proposed topology are limited, and the diodes reverse-recovery issue are eliminated. Due to the low input current ripple, the suggested topology can be used for renewable energy sources. Furthermore, because of the low number of components along with the soft-switching operation, the proposed circuit can offer enough high efficiency. The operational principle, steady-state analysis, and characteristics of the proposed converter are provided. Finally, a 200 W prototype with 25 V input and 400 V output voltage is built to validate the analytical results

High step up DC-DC converter topology for PV systems and electric vehicles

This thesis presents new high step-up DC-DC converters for photovoltaic and electric vehicle applications. An asymmetric flyback-forward DC-DC converter is proposed for the PV system controlled by the MPPT algorithm. The second converter is a modular switched-capacitor DC-DC converter, it has the capability to operate with transistor and capacitor open-circuit faults in every module. The results from simulations and tests of the asymmetric DC-DC converters have suggested that the proposed converter has a 5% to 10% voltage gain ratio increased to the symmetric structures among 100W – 300W power (such as [3]) range while maintaining efficiency of 89%-93% when input voltage is in the range of 25 – 30 V. they also indicated that the softswitching technique has been achieved, which significantly reduce the power loss by 1.7%, which exceeds the same topology of the proposed converter without the softswitching technique. Moreover, the converters can maintain rated outputs under main transistor open circuit fault situation or capacitor open circuit faults. The simulation and test results of the proposed modularized switched-capacitor DC-DC converters indicate that the proposed converter has the potential of extension, it can be embedded with infinite module in simulation results, however, during experiment. The sign open circuit fault to the transistors and capacitors would have low impact to the proposed converters, only the current ripple on the input source would increase around 25% for 4-module switched-capacitor DC-DC converters. The developed converters can be applied to many applications where DC-DC voltage conversion is alighted. In addition to PVs and EVs. Since they can ride through some electrical faults in the devices, the developed converter will have economic implications to improve the system efficiency and reliability

Power Converters in Power Electronics

In recent years, power converters have played an important role in power electronics technology for different applications, such as renewable energy systems, electric vehicles, pulsed power generation, and biomedical sciences. Power converters, in the realm of power electronics, are becoming essential for generating electrical power energy in various ways. This Special Issue focuses on the development of novel power converter topologies in power electronics. The topics of interest include, but are not limited to: Z-source converters; multilevel power converter topologies; switched-capacitor-based power converters; power converters for battery management systems; power converters in wireless power transfer techniques; the reliability of power conversion systems; and modulation techniques for advanced power converters

Isolated Single-stage Power Electronic Building Blocks Using Medium Voltage Series-stacked Wide-bandgap Switches

The demand for efficient power conversion systems that can process the energy at high power and voltage levels is increasing every day. These systems are to be used in microgrid applications. Wide-bandgap semiconductor devices (i.e. Silicon Carbide (SiC) and Gallium Nitride (GaN) devices) are very promising candidates due to their lower conduction and switching losses compared to the state-of-the-art Silicon (Si) devices. The main challenge for these devices is that their breakdown voltages are relatively lower compared to their Si counterpart. In addition, the high frequency operation of the wide-bandgap devices are impeded in many cases by the magnetic core losses of the magnetic coupling components (i.e. coupled inductors and/or high frequency transformers) utilized in the power converter circuit. Six new dc-dc converter topologies are propose. The converters have reduced voltage stresses on the switches. Three of them are unidirectional step-up converters with universal input voltage which make them excellent candidates for photovoltaic and fuel cell applications. The other three converters are bidirectional dc-dc converters with wide voltage conversion ratios. These converters are very good candidates for the applications that require bidirectional power flow capability. In addition, the wide voltage conversion ratios of these converters can be utilized for applications such as energy storage systems with wide voltage swings