97 research outputs found
Index Modulation Techniques for Energy-efficient Transmission in Large-scale MIMO Systems
This thesis exploits index modulation techniques to design energy- and spectrum-efficient system models to operate in future wireless networks. In this respect, index modulation techniques are studied considering two different media: mapping the information onto the frequency indices of multicarrier systems, and onto the antenna array indices of a platform that comprises multiple antennas.
The index modulation techniques in wideband communication scenarios considering orthogonal and generalized frequency division multiplexing systems are studied first. Single cell multiuser networks are considered while developing the system models that exploit the index modulation on the subcarriers of the multicarrier systems. Instead of actively modulating all the subcarriers, a subset is selected according to the index modulation bits. As a result, there are subcarriers that remain idle during the data transmission phase and the activation pattern of the subcarriers convey additional information.
The transceivers for the orthogonal and generalized frequency division multiplexing systems with index modulation are both designed considering the uplink and downlink transmission phases with a linear combiner and precoder in order to reduce the system complexity. In the developed system models, channel state information is required only at the base station. The linear combiner is designed adopting minimum mean square error method to mitigate the inter-user-interference. The proposed system models offer a flexible design as the parameters are independent of each other. The parameters can be adjusted to design the system in favor of the energy efficiency, spectrum efficiency, peak-to-average power ratio, or error performance.
Then, the index modulation techniques are studied for large-scale multiple-input multiple-output systems that operate in millimeter wave bands. In order to overcome the drawbacks of transmission in millimeter wave frequencies, channel properties should be taken in to account while envisaging the wireless communication network. The large-scale multiple-input multiple-output systems increase the degrees of freedom in the spatial domain. This feature can be exploited to focus the transmit power directly onto the intended receiver terminal to cope with the severe path-loss. However, scaling up the number of hardware elements results in excessive power consumption. Hybrid architectures provide a remedy by shifting a part of the signal processing to the analog domain. In this way, the number of bulky and high power consuming hardware elements can be reduced. However, there will be a performance degradation as a consequence of renouncing the fully digital signal processing. Index modulation techniques can be combined with the hybrid system architecture to compensate the loss in spectrum efficiency to further increase the data rates.
A user terminal architecture is designed that employs analog beamforming together with spatial modulation where a part of the information bits is mapped onto the indices of the antenna arrays. The system is comprised a switching stage that allocates the user terminal antennas on the phase shifter groups to minimize the spatial correlation, and a phase shifting stage that maximizes the beamforming gain to combat the path-loss. A computationally efficient optimization algorithm is developed to configure the system. The flexibility of the architecture enables optimization of the hybrid transceiver at any signal-to-noise ratio values.
A base station is designed in which hybrid beamforming together with spatial modulation is employed. The analog beamformer is designed to point the transmit beam only in the direction of the intended user terminal to mitigate leakage of the transmit power to other directions. The analog beamformer to transmit the signal is chosen based on the spatial modulation bits. The digital precoder is designed to eliminate the inter-user-interference by exploiting the zero-forcing method. The base station computes the hybrid beamformers and the digital combiners, and only feeds back the digital combiners of each antenna array-user pair to the related user terminals. Thus, a low complexity user architecture is sufficient to achieve a higher performance. The developed optimization framework for the energy efficiency jointly optimizes the number of served users and the total transmit power by utilizing the derived upper bound of the achievable rate. The proposed transceiver architectures provide a more energy-efficient system model compared to the hybrid systems in which the spatial modulation technique is not exploited.
This thesis develops low-complexity system models that operate in narrowband and wideband channel environments to meet the energy and spectrum efficiency demands of future wireless networks. It is corroborated in the thesis that adopting index modulation techniques both in the systems improves the system performance in various aspects.:1 Introduction 1
1.1 Motivation 1
1.2 Overview and Contribution 2
1.3 Outline 9
2 Preliminaries and Fundamentals 13
2.1 Multicarrier Systems 13
2.2 Large-scale Multiple Input Multiple Output Systems 17
2.3 Index Modulation Techniques 19
2.4 Single Cell Multiuser Networks 22
3 Multicarrier Systems with Index Modulation 27
3.1 Orthogonal Frequency Division Multiplexing 28
3.2 Generalized Frequency Division Multiplexing 40
3.3 Summary 52
4 Hybrid Beamforming with Spatial Modulation 55
4.1 Uplink Transmission 56
4.2 Downlink Transmission 74
4.3 Summary 106
5 Conclusion and Outlook 109
5.1 Conclusion 109
5.2 Outlook 111
A Quantization Error Derivations 113
B On the Achievable Rate of Gaussian Mixtures 115
B.1 The Conditional Density Function 115
B.2 Tight Bounds on the Differential Entropy 116
B.3 A Bound on the Achievable Rate 118
C Multiuser MIMO Downlink without Spatial Modulation 121
Bibliograph
Codebook Based Hybrid Precoding for Millimeter Wave Multiuser Systems
In millimeter wave (mmWave) systems, antenna architecture limitations make it
difficult to apply conventional fully digital precoding techniques but call for
low cost analog radio-frequency (RF) and digital baseband hybrid precoding
methods. This paper investigates joint RF-baseband hybrid precoding for the
downlink of multiuser multi-antenna mmWave systems with a limited number of RF
chains. Two performance measures, maximizing the spectral efficiency and the
energy efficiency of the system, are considered. We propose a codebook based RF
precoding design and obtain the channel state information via a beam sweep
procedure. Via the codebook based design, the original system is transformed
into a virtual multiuser downlink system with the RF chain constraint.
Consequently, we are able to simplify the complicated hybrid precoding
optimization problems to joint codeword selection and precoder design (JWSPD)
problems. Then, we propose efficient methods to address the JWSPD problems and
jointly optimize the RF and baseband precoders under the two performance
measures. Finally, extensive numerical results are provided to validate the
effectiveness of the proposed hybrid precoders.Comment: 35 pages, 9 figures, to appear in Trans. on Signal Process, 201
Ondas milimétricas e MIMO massivo para otimização da capacidade e cobertura de redes heterogeneas de 5G
Today's Long Term Evolution Advanced (LTE-A) networks cannot support
the exponential growth in mobile traffic forecast for the next decade. By
2020, according to Ericsson, 6 billion mobile subscribers worldwide are projected
to generate 46 exabytes of mobile data traffic monthly from 24 billion
connected devices, smartphones and short-range Internet of Things (IoT)
devices being the key prosumers. In response, 5G networks are foreseen
to markedly outperform legacy 4G systems. Triggered by the International
Telecommunication Union (ITU) under the IMT-2020 network initiative, 5G
will support three broad categories of use cases: enhanced mobile broadband
(eMBB) for multi-Gbps data rate applications; ultra-reliable and low latency
communications (URLLC) for critical scenarios; and massive machine
type communications (mMTC) for massive connectivity. Among the several
technology enablers being explored for 5G, millimeter-wave (mmWave)
communication, massive MIMO antenna arrays and ultra-dense small cell
networks (UDNs) feature as the dominant technologies. These technologies
in synergy are anticipated to provide the 1000_ capacity increase for 5G
networks (relative to 4G) through the combined impact of large additional
bandwidth, spectral efficiency (SE) enhancement and high frequency reuse,
respectively. However, although these technologies can pave the way towards
gigabit wireless, there are still several challenges to solve in terms of
how we can fully harness the available bandwidth efficiently through appropriate
beamforming and channel modeling approaches. In this thesis, we
investigate the system performance enhancements realizable with mmWave
massive MIMO in 5G UDN and cellular infrastructure-to-everything (C-I2X)
application scenarios involving pedestrian and vehicular users. As a critical
component of the system-level simulation approach adopted in this thesis,
we implemented 3D channel models for the accurate characterization of the
wireless channels in these scenarios and for realistic performance evaluation.
To address the hardware cost, complexity and power consumption of the
massive MIMO architectures, we propose a novel generalized framework for
hybrid beamforming (HBF) array structures. The generalized model reveals
the opportunities that can be harnessed with the overlapped subarray structures
for a balanced trade-o_ between SE and energy efficiently (EE) of 5G
networks. The key results in this investigation show that mmWave massive
MIMO can deliver multi-Gbps rates for 5G whilst maintaining energy-efficient operation of the network.As redes LTE-A atuais não são capazes de suportar o crescimento exponencial
de tráfego que está previsto para a próxima década. De acordo
com a previsão da Ericsson, espera-se que em 2020, a nível global, 6 mil
milhões de subscritores venham a gerar mensalmente 46 exa bytes de tráfego
de dados a partir de 24 mil milhões de dispositivos ligados à rede móvel,
sendo os telefones inteligentes e dispositivos IoT de curto alcance os principais
responsáveis por tal nível de tráfego. Em resposta a esta exigência,
espera-se que as redes de 5a geração (5G) tenham um desempenho substancialmente
superior às redes de 4a geração (4G) atuais. Desencadeado pelo
UIT (União Internacional das Telecomunicações) no âmbito da iniciativa
IMT-2020, o 5G irá suportar três grandes tipos de utilizações: banda larga
móvel capaz de suportar aplicações com débitos na ordem de vários Gbps;
comunicações de baixa latência e alta fiabilidade indispensáveis em cenários
de emergência; comunicações massivas máquina-a-máquina para conectividade
generalizada. Entre as várias tecnologias capacitadoras que estão a ser
exploradas pelo 5G, as comunicações através de ondas milimétricas, os agregados
MIMO massivo e as redes celulares ultradensas (RUD) apresentam-se
como sendo as tecnologias fundamentais. Antecipa-se que o conjunto
destas tecnologias venha a fornecer às redes 5G um aumento de capacidade
de 1000x através da utilização de maiores larguras de banda, melhoria da
eficiência espectral, e elevada reutilização de frequências respetivamente.
Embora estas tecnologias possam abrir caminho para as redes sem fios
com débitos na ordem dos gigabits, existem ainda vários desafios que têm
que ser resolvidos para que seja possível aproveitar totalmente a largura de
banda disponível de maneira eficiente utilizando abordagens de formatação
de feixe e de modelação de canal adequadas. Nesta tese investigamos a
melhoria de desempenho do sistema conseguida através da utilização de
ondas milimétricas e agregados MIMO massivo em cenários de redes celulares
ultradensas de 5a geração e em cenários 'infraestrutura celular-para-qualquer
coisa' (do inglês: cellular infrastructure-to-everything) envolvendo
utilizadores pedestres e veiculares. Como um componente fundamental das
simulações de sistema utilizadas nesta tese é o canal de propagação, implementamos modelos de canal tridimensional (3D) para caracterizar de
forma precisa o canal de propagação nestes cenários e assim conseguir uma
avaliação de desempenho mais condizente com a realidade. Para resolver os
problemas associados ao custo do equipamento, complexidade e consumo
de energia das arquiteturas MIMO massivo, propomos um modelo inovador
de agregados com formatação de feixe híbrida. Este modelo genérico revela
as oportunidades que podem ser aproveitadas através da sobreposição
de sub-agregados no sentido de obter um compromisso equilibrado entre
eficiência espectral (ES) e eficiência energética (EE) nas redes 5G. Os principais
resultados desta investigação mostram que a utilização conjunta de
ondas milimétricas e de agregados MIMO massivo possibilita a obtenção, em
simultâneo, de taxas de transmissão na ordem de vários Gbps e a operação
de rede de forma energeticamente eficiente.Programa Doutoral em Telecomunicaçõe
Near-Field Communications: What Will Be Different?
The design dilemma of "What will be different between near-field
communications (NFC) and far-field communications (FFC)?" is addressed from
four perspectives. 1) From the channel modelling perspective, the differences
between near-field and far-field channel models are discussed. A novel Green's
function-based channel model is proposed for continuous-aperture antennas,
which is contrasted to conventional channel models tailored for
spatially-discrete antennas. 2) From the performance analysis perspective,
analytical results for characterizing the degrees of freedom and the power
scaling laws in the near-field region are provided for both spatially-discrete
and continuous-aperture antennas. 3) From the beamforming perspective,
far-field beamforming is analogous to a "flashlight" that enables beamsteering,
while near-field beamforming can be likened to a "spotlight" that facilitates
beamfocusing. As a further advance, a couple of new beamforming structures are
proposed for exploiting the new characteristics of NFC. 4) From the application
perspective, new designs are discussed in the context of promising
next-generation technologies in NFC, where our preliminary numerical results
demonstrate that distance-aware target sensing and enhanced physical layer
security can be realized in NFC. Finally, several future research directions of
NFC are discussed.Comment: 9 pages, 5 figures, submit to possible IEEE journa
Enabling Efficient Communications Over Millimeter Wave Massive MIMO Channels Using Hybrid Beamforming
The use of massive multiple-input multiple-output (MIMO) over millimeter wave (mmWave) channels is the new frontier for fulfilling the exigent requirements of next-generation wireless systems and solving the wireless network impending crunch. Massive MIMO systems and mmWave channels offer larger numbers of antennas, higher carrier frequencies, and wider signaling bandwidths. Unleashing the full potentials of these tremendous degrees of freedom (dimensions) hinges on the practical deployment of those technologies. Hybrid analog and digital beamforming is considered as a stepping-stone to the practical deployment of mmWave massive MIMO systems since it significantly reduces their operating and implementation costs, energy consumption, and system design complexity. The prevalence of adopting mmWave and massive MIMO technologies in next-generation wireless systems necessitates developing agile and cost-efficient hybrid beamforming solutions that match the various use-cases of these systems. In this thesis, we propose hybrid precoding and combining solutions that are tailored to the needs of these specific cases and account for the main limitations of hybrid processing. The proposed solutions leverage the sparsity and spatial correlation of mmWave massive MIMO channels to reduce the feedback overhead and computational complexity of hybrid processing.
Real-time use-cases of next-generation wireless communication, including connected cars, virtual-reality/augmented-reality, and high definition video transmission, require high-capacity and low-latency wireless transmission. On the physical layer level, this entails adopting near capacity-achieving transmission schemes with very low computational delay. Motivated by this, we propose low-complexity hybrid precoding and combining schemes for massive MIMO systems with partially and fully-connected antenna array structures. Leveraging the disparity in the dimensionality of the analog and the digital processing matrices, we develop a two-stage channel diagonalization design approach in order to reduce the computational complexity of the hybrid precoding and combining while maintaining high spectral efficiency. Particularly, the analog processing stage is designed to maximize the antenna array gain in order to avoid performing computationally intensive operations such as matrix inversion and singular value decomposition in high dimensions. On the other hand, the low-dimensional digital processing stage is designed to maximize the spectral efficiency of the systems. Computational complexity analysis shows that the proposed schemes offer significant savings compared to prior works where asymptotic computational complexity reductions ranging between and . Simulation results validate that the spectral efficiency of the proposed schemes is near-optimal where in certain scenarios the signal-to-noise-ratio (SNR) gap to the optimal fully-digital spectral efficiency is less than dB.
On the other hand, integrating mmWave and massive MIMO into the cellular use-cases requires adopting hybrid beamforming schemes that utilize limited channel state information at the transmitter (CSIT) in order to adapt the transmitted signals to the current channel. This is so mainly because obtaining perfect CSIT in frequency division duplexing (FDD) architecture, which dominates the cellular systems, poses serious concerns due to its large training and excessive feedback overhead. Motivated by this, we develop low-overhead hybrid precoding algorithms for selecting the baseband digital and radio frequency (RF) analog precoders from statistically skewed DFT-based codebooks. The proposed algorithms aim at maximizing the spectral efficiency based on minimizing the chordal distance between the optimal unconstrained precoder and the hybrid beamformer and maximizing the signal to interference noise ratio for the single-user and multi-user cases, respectively. Mathematical analysis shows that the proposed algorithms are asymptotically optimal as the number of transmit antennas goes to infinity and the mmWave channel has a limited number of paths. Moreover, it shows that the performance gap between the lower and upper bounds depends heavily on how many DFT columns are aligned to the largest eigenvectors of the transmit antenna array response of the mmWave channel or equivalently the transmit channel covariance matrix when only the statistical channel knowledge is available at the transmitter. Further, we verify the performance of the proposed algorithms numerically where the obtained results illustrate that the spectral efficiency of the proposed algorithms can approach that of the optimal precoder in certain scenarios. Furthermore, these results illustrate that the proposed hybrid precoding schemes have superior spectral efficiency performance while requiring lower (or at most comparable) channel feedback overhead in comparison with the prior art
Additively Manufactured RF Components, Packaging, Modules, and Flexible Modular Phased Arrays Enabling Widespread Massively Scalable mmWave/5G Applications
The 5G era is here and with it comes many challenges, particularily facing the high frequency mmWave adoption. This is because of the cost to implement such dense networks is much greater due to the high propagation losses of signals that range from 26 GHz to 40 GHz. Therefore there needs to be a way to utilize a method of fabrication that can change with the various environments that 5G will be deployed in, be it dense urban areas or suburban sprawl. In this research, the focus is on making these RF components utilized for 5G at low cost and modular with a focus on additive manufacturing. Since additive manufacturing is a rapid prototyping technique, the technology can be quickly adjusted and altered to meet certain specifications with negligible overhead.
Several areas of research will be explored. Firstly, various RF passive components such as additively manufactured antennas and couplers with a combination hybrid inkjet and 3D printing will be discussed. Passive components are critical for evaluating the process of additive manufacturing for high frequency operation. Secondly, various structures will be evaluated specifically for packaging mmWave ICs, including interconnects, smart packaging and encapsulants for use in single or multichip modules. Thirdly, various antenna fabrication techniques will be explored which enables fully integrated ICs with antennas, called System on Antenna (SoA) which utilizes both inkjet and 3D printing to combine antennas and ICs into modules. These modules, can then be built into arrays in a modular fashion, allowing for large or smaller arrays to be assembled on the fly. Finally, a method of calibrating the arrays is introduced, utilizing inkjet printed sensors. This allows the sensor to actively detect bends and deformations in the array and restore optimal antenna array performance. Built for flexible phased arrays, the sensor is designed for implementation for ubiquitous use, meaning that its can be placed on any surface, which enables widespread use of 5G technologies.Ph.D
A survey on hybrid beamforming techniques in 5G : architecture and system model perspectives
The increasing wireless data traffic demands have driven the need to explore suitable spectrum regions for meeting the projected requirements. In the light of this, millimeter wave (mmWave) communication has received considerable attention from the research community. Typically, in fifth generation (5G) wireless networks, mmWave massive multiple-input multiple-output (MIMO) communications is realized by the hybrid transceivers which combine high dimensional analog phase shifters and power amplifiers with lower-dimensional digital signal processing units. This hybrid beamforming design reduces the cost and power consumption which is aligned with an energy-efficient design vision of 5G. In this paper, we track the progress in hybrid beamforming for massive MIMO communications in the context of system models of the hybrid transceivers' structures, the digital and analog beamforming matrices with the possible antenna configuration scenarios and the hybrid beamforming in heterogeneous wireless networks. We extend the scope of the discussion by including resource management issues in hybrid beamforming. We explore the suitability of hybrid beamforming methods, both, existing and proposed till first quarter of 2017, and identify the exciting future challenges in this domain
- …