7,058 research outputs found
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
Unified clustering and communication protocol for wireless sensor networks
In this paper we present an energy-efficient cross layer protocol for providing application specific reservations in wireless senor networks called the “Unified Clustering and Communication Protocol ” (UCCP). Our modular cross layered framework satisfies three wireless sensor network requirements, namely, the QoS requirement of heterogeneous applications, energy aware clustering and data forwarding by relay sensor nodes. Our unified design approach is motivated by providing an integrated and viable solution for self organization and end-to-end communication is wireless sensor networks. Dynamic QoS based reservation guarantees are provided using a reservation-based TDMA approach. Our novel energy-efficient clustering approach employs a multi-objective optimization technique based on OR (operations research) practices. We adopt a simple hierarchy in which relay nodes forward data messages from cluster head to the sink, thus eliminating the overheads needed to maintain a routing protocol. Simulation results demonstrate that UCCP provides an energy-efficient and scalable solution to meet the application specific QoS demands in resource constrained sensor nodes. Index Terms — wireless sensor networks, unified communication, optimization, clustering and quality of service
A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System
Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem.
As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres.
Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and
integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ).
PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases.
Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model
A Comprehensive Experimental Comparison of Event Driven and Multi-Threaded Sensor Node Operating Systems
The capabilities of a sensor network are strongly influenced by the operating system used on the sensor nodes. In general, two different sensor network operating system types are currently considered: event driven and multi-threaded. It is commonly assumed that event driven operating systems are more suited to sensor networks as they use less memory and processing resources. However, if factors other than resource usage are considered important, a multi-threaded system might be preferred. This paper compares the resource needs of multi-threaded and event driven sensor network operating systems. The resources considered are memory usage and power consumption. Additionally, the event handling capabilities of event driven and multi-threaded operating systems are analyzed and compared. The results presented in this paper show that for a number of application areas a thread-based sensor network operating system is feasible and preferable
Minimizing Flow Time in the Wireless Gathering Problem
We address the problem of efficient data gathering in a wireless network
through multi-hop communication. We focus on the objective of minimizing the
maximum flow time of a data packet. We prove that no polynomial time algorithm
for this problem can have approximation ratio less than \Omega(m^{1/3) when
packets have to be transmitted, unless . We then use resource
augmentation to assess the performance of a FIFO-like strategy. We prove that
this strategy is 5-speed optimal, i.e., its cost remains within the optimal
cost if we allow the algorithm to transmit data at a speed 5 times higher than
that of the optimal solution we compare to
Markov Decision Processes with Applications in Wireless Sensor Networks: A Survey
Wireless sensor networks (WSNs) consist of autonomous and resource-limited
devices. The devices cooperate to monitor one or more physical phenomena within
an area of interest. WSNs operate as stochastic systems because of randomness
in the monitored environments. For long service time and low maintenance cost,
WSNs require adaptive and robust methods to address data exchange, topology
formulation, resource and power optimization, sensing coverage and object
detection, and security challenges. In these problems, sensor nodes are to make
optimized decisions from a set of accessible strategies to achieve design
goals. This survey reviews numerous applications of the Markov decision process
(MDP) framework, a powerful decision-making tool to develop adaptive algorithms
and protocols for WSNs. Furthermore, various solution methods are discussed and
compared to serve as a guide for using MDPs in WSNs
- …