1,880 research outputs found
Segment Routing: a Comprehensive Survey of Research Activities, Standardization Efforts and Implementation Results
Fixed and mobile telecom operators, enterprise network operators and cloud
providers strive to face the challenging demands coming from the evolution of
IP networks (e.g. huge bandwidth requirements, integration of billions of
devices and millions of services in the cloud). Proposed in the early 2010s,
Segment Routing (SR) architecture helps face these challenging demands, and it
is currently being adopted and deployed. SR architecture is based on the
concept of source routing and has interesting scalability properties, as it
dramatically reduces the amount of state information to be configured in the
core nodes to support complex services. SR architecture was first implemented
with the MPLS dataplane and then, quite recently, with the IPv6 dataplane
(SRv6). IPv6 SR architecture (SRv6) has been extended from the simple steering
of packets across nodes to a general network programming approach, making it
very suitable for use cases such as Service Function Chaining and Network
Function Virtualization. In this paper we present a tutorial and a
comprehensive survey on SR technology, analyzing standardization efforts,
patents, research activities and implementation results. We start with an
introduction on the motivations for Segment Routing and an overview of its
evolution and standardization. Then, we provide a tutorial on Segment Routing
technology, with a focus on the novel SRv6 solution. We discuss the
standardization efforts and the patents providing details on the most important
documents and mentioning other ongoing activities. We then thoroughly analyze
research activities according to a taxonomy. We have identified 8 main
categories during our analysis of the current state of play: Monitoring,
Traffic Engineering, Failure Recovery, Centrally Controlled Architectures, Path
Encoding, Network Programming, Performance Evaluation and Miscellaneous...Comment: SUBMITTED TO IEEE COMMUNICATIONS SURVEYS & TUTORIAL
A Survey of Network Optimization Techniques for Traffic Engineering
TCP/IP represents the reference standard for the implementation of interoperable communication networks. Nevertheless, the layering principle at the basis of interoperability severely limits the performance of data communication networks, thus requiring proper configuration and management in order to provide effective management of traffic flows. This paper presents a brief survey related to network optimization using Traffic Engineering algorithms, aiming at providing additional insight to the different alternatives available in the scientific literature
A Survey on the Contributions of Software-Defined Networking to Traffic Engineering
Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567
Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-
Optimized Design of Survivable MPLS over Optical Transport Networks. Optical Switching and Networking
In this paper we study different options for the survivability implementation
in MPLS over Optical Transport Networks in terms of network resource usage and
configuration cost. We investigate two approaches to the survivability
deployment: single layer and multilayer survivability and present various
methods for spare capacity allocation (SCA) to reroute disrupted traffic. The
comparative analysis shows the influence of the traffic granularity on the
survivability cost: for high bandwidth LSPs, close to the optical channel
capacity, the multilayer survivability outperforms the single layer one,
whereas for low bandwidth LSPs the single layer survivability is more
cost-efficient. For the multilayer survivability we demonstrate that by mapping
efficiently the spare capacity of the MPLS layer onto the resources of the
optical layer one can achieve up to 22% savings in the total configuration cost
and up to 37% in the optical layer cost. Further savings (up to 9 %) in the
wavelength use can be obtained with the integrated approach to network
configuration over the sequential one, however, at the increase in the
optimization problem complexity. These results are based on a cost model with
actual technology pricing and were obtained for networks targeted to a
nationwide coverage
Traffic Engineering with Segment Routing: SDN-based Architectural Design and Open Source Implementation
Traffic Engineering (TE) in IP carrier networks is one of the functions that
can benefit from the Software Defined Networking paradigm. By logically
centralizing the control of the network, it is possible to "program" per-flow
routing based on TE goals. Traditional per-flow routing requires a direct
interaction between the SDN controller and each node that is involved in the
traffic paths. Depending on the granularity and on the temporal properties of
the flows, this can lead to scalability issues for the amount of routing state
that needs to be maintained in core network nodes and for the required
configuration traffic. On the other hand, Segment Routing (SR) is an emerging
approach to routing that may simplify the route enforcement delegating all the
configuration and per-flow state at the border of the network. In this work we
propose an architecture that integrates the SDN paradigm with SR-based TE, for
which we have provided an open source reference implementation. We have
designed and implemented a simple TE/SR heuristic for flow allocation and we
show and discuss experimental results.Comment: Extended version of poster paper accepted for EWSDN 2015 (version v4
- December 2015
Energy management in communication networks: a journey through modelling and optimization glasses
The widespread proliferation of Internet and wireless applications has
produced a significant increase of ICT energy footprint. As a response, in the
last five years, significant efforts have been undertaken to include
energy-awareness into network management. Several green networking frameworks
have been proposed by carefully managing the network routing and the power
state of network devices.
Even though approaches proposed differ based on network technologies and
sleep modes of nodes and interfaces, they all aim at tailoring the active
network resources to the varying traffic needs in order to minimize energy
consumption. From a modeling point of view, this has several commonalities with
classical network design and routing problems, even if with different
objectives and in a dynamic context.
With most researchers focused on addressing the complex and crucial
technological aspects of green networking schemes, there has been so far little
attention on understanding the modeling similarities and differences of
proposed solutions. This paper fills the gap surveying the literature with
optimization modeling glasses, following a tutorial approach that guides
through the different components of the models with a unified symbolism. A
detailed classification of the previous work based on the modeling issues
included is also proposed
Software defined networking: meeting carrier grade requirements
Software Defined Networking is a networking paradigm which allows network operators to manage networking elements using software running on an external server. This is accomplished by a split in the architecture between the forwarding element and the control element. Two technologies which allow this split for packet networks are ForCES and Openflow. We present energy efficiency and resilience aspects of carrier grade networks which can be met by Openflow. We implement flow restoration and run extensive experiments in an emulated carrier grade network. We show that Openflow can restore traffic quite fast, but its dependency on a centralized controller means that it will be hard to achieve 50 ms restoration in large networks serving many flows. In order to achieve 50 ms recovery, protection will be required in carrier grade networks
Software Defined Networks based Smart Grid Communication: A Comprehensive Survey
The current power grid is no longer a feasible solution due to
ever-increasing user demand of electricity, old infrastructure, and reliability
issues and thus require transformation to a better grid a.k.a., smart grid
(SG). The key features that distinguish SG from the conventional electrical
power grid are its capability to perform two-way communication, demand side
management, and real time pricing. Despite all these advantages that SG will
bring, there are certain issues which are specific to SG communication system.
For instance, network management of current SG systems is complex, time
consuming, and done manually. Moreover, SG communication (SGC) system is built
on different vendor specific devices and protocols. Therefore, the current SG
systems are not protocol independent, thus leading to interoperability issue.
Software defined network (SDN) has been proposed to monitor and manage the
communication networks globally. This article serves as a comprehensive survey
on SDN-based SGC. In this article, we first discuss taxonomy of advantages of
SDNbased SGC.We then discuss SDN-based SGC architectures, along with case
studies. Our article provides an in-depth discussion on routing schemes for
SDN-based SGC. We also provide detailed survey of security and privacy schemes
applied to SDN-based SGC. We furthermore present challenges, open issues, and
future research directions related to SDN-based SGC.Comment: Accepte
- …