A network access control framework for 6LoWPAN networks

Low power over wireless personal area networks (LoWPAN), in particular wireless sensor networks, represent an emerging technology with high potential to be employed in critical situations like security surveillance, battlefields, smart-grids, and in e-health applications. The support of security services in LoWPAN is considered a challenge. First, this type of networks is usually deployed in unattended environments, making them vulnerable to security attacks. Second, the constraints inherent to LoWPAN, such as scarce resources and limited battery capacity, impose a careful planning on how and where the security services should be deployed. Besides protecting the network from some well-known threats, it is important that security mechanisms be able to withstand attacks that have not been identified before. One way of reaching this goal is to control, at the network access level, which nodes can be attached to the network and to enforce their security compliance. This paper presents a network access security framework that can be used to control the nodes that have access to the network, based on administrative approval, and to enforce security compliance to the authorized nodes

A security protocol for authentication of binding updates in Mobile IPv6.

Wireless communication technologies have come along way, improving with every generational leap. As communications evolve so do the system architectures, models and paradigms. Improvements have been seen in the jump from 2G to 3G networks in terms of security. Yet these issues persist and will continue to plague mobile communications into the leap towards 4G networks if not addressed. 4G will be based on the transmission of Internet packets only, using an architecture known as mobile IP. This will feature many advantages, however security is still a fundamental issue to be resolved. One particular security issue involves the route optimisation technique, which deals with binding updates. This allows the corresponding node to by-pass the home agent router to communicate directly with the mobile node. There are a variety of security vulnerabilities with binding updates, which include the interception of data packets, which would allow an attacker to eavesdrop on its contents, breaching the users confidentiality, or to modify transmitted packets for the attackers own malicious purposes. Other possible vulnerabilities with mobile IP include address spoofing, redirection and denial of service attacks. For many of these attacks, all the attacker needs to know is the IPv6 addresses of the mobile’s home agent and the corresponding node. There are a variety of security solutions to prevent these attacks from occurring. Two of the main solutions are cryptography and authentication. Cryptography allows the transmitted data to be scrambled in an undecipherable way resulting in any intercepted packets being illegible to the attacker. Only the party possessing the relevant key will be able to decrypt the message. Authentication is the process of verifying the identity of the user or device one is in communication with. Different authentication architectures exist however many of them rely on a central server to verify the users, resulting in a possible single point of attack. Decentralised authentication mechanisms would be more appropriate for the nature of mobile IP and several protocols are discussed. However they all posses’ flaws, whether they be overly resource intensive or give away vital address data, which can be used to mount an attack. As a result location privacy is investigated in a possible attempt at hiding this sensitive data. Finally, a security solution is proposed to address the security vulnerabilities found in binding updates and attempts to overcome the weaknesses of the examined security solutions. The security protocol proposed in this research involves three new security techniques. The first is a combined solution using Cryptographically Generated Addresses and Return Routability, which are already established solutions, and then introduces a new authentication procedure, to create the Distributed Authentication Protocol to aid with privacy, integrity and authentication. The second is an enhancement to Return Routability called Dual Identity Return Routability, which provides location verification authentication for multiple identities on the same device. The third security technique is called Mobile Home Agents, which provides device and user authentication while introducing location privacy and optimised communication routing. All three security techniques can be used together or individually and each needs to be passed before the binding update is accepted. Cryptographically Generated Addresses asserts the users ownership of the IPv6 address by generating the interface identifier by computing a cryptographic one-way hash function from the users’ public key and auxiliary parameters. The binding between the public key and the address can be verified by recomputing the hash value and by comparing the hash with the interface identifier. This method proves ownership of the address, however it does not prove the address is reachable. After establishing address ownership, Return Routability would then send two security tokens to the mobile node, one directly and one via the home agent. The mobile node would then combine them together to create an encryption key called the binding key allowing the binding update to be sent securely to the correspondent node. This technique provides a validation to the mobile nodes’ location and proves its ownership of the home agent. Return Routability provides a test to verify that the node is reachable. It does not verify that the IPv6 address is owned by the user. This method is combined with Cryptographically Generated Addresses to provide best of both worlds. The third aspect of the first security solution introduces a decentralised authentication mechanism. The correspondent requests the authentication data from both the mobile node and home agent. The mobile sends the data in plain text, which could be encrypted with the binding key and the home agent sends a hash of the data. The correspondent then converts the data so both are hashes and compares them. If they are the same, authentication is successful. This provides device and user authentication which when combined with Cryptographically Generated Addresses and Return Routability create a robust security solution called the Distributed Authentication Protocol. The second new technique was designed to provide an enhancement to a current security solution. Dual Identity Return Routability builds on the concept of Return Routability by providing two Mobile IPv6 addresses on a mobile device, giving the user two separate identities. After establishing address ownership with Cryptographically Generated Addresses, Dual Identity Return Routability would then send security data to both identities, each on a separate network and each having heir own home agents, and the mobile node would then combine them together to create the binding key allowing the binding update to be sent securely to the correspondent node. This technique provides protection against address spoofing as an attacker needs two separate ip addresses, which are linked together. Spoofing only a single address will not pass this security solution. One drawback of the security techniques described, however, is that none of them provide location privacy to hide the users IP address from attackers. An attacker cannot mount a direct attack if the user is invisible. The third new security solution designed is Mobile Home Agents. These are software agents, which provide location privacy to the mobile node by acting as a proxy between it and the network. The Mobile Home Agent resides on the point of attachment and migrates to a new point of attachment at the same time as the mobile node. This provides reduced latency communication and a secure environment for the mobile node. These solutions can be used separately or combined together to form a super security solution, which is demonstrated in this thesis and attempts to provide proof of address ownership, reachability, user and device authentication, location privacy and reduction in communication latency. All these security features are design to protect against one the most devastating attacks in Mobile IPv6, the false binding update, which can allow an attacker to impersonate and deny service to the mobile node by redirecting all data packets to itself. The solutions are all simulated with different scenarios and network configurations and with a variety of attacks, which attempt to send a false binding update to the correspondent node. The results were then collected and analysed to provide conclusive proof that the proposed solutions are effective and robust in protecting against the false binding updates creating a safe and secure network for all

IPv6: a new security challenge

Tese de mestrado em Segurança Informática, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2011O Protocolo de Internet versão 6 (IPv6) foi desenvolvido com o intuito de resolver alguns dos problemas não endereçados pelo seu antecessor, o Protocolo de Internet versão 4 (IPv4), nomeadamente questões relacionadas com segurança e com o espaço de endereçamento disponível. São muitos os que na última década têm desenvolvido estudos sobre os investimentos necessários à sua adoção e sobre qual o momento certo para que o mesmo seja adotado por todos os players no mercado. Recentemente, o problema da extinção de endereçamentos públicos a ser disponibilizado pelas diversas Region Internet registry – RIRs - despertou o conjunto de entidades envolvidas para que se agilizasse o processo de migração do IPv4 para o IPv6. Ao contrário do IPv4, esta nova versão considera a segurança como um objetivo fundamental na sua implementação, nesse sentido é recomendado o uso do protocolo IPsec ao nível da camada de rede. No entanto, e devido à imaturidade do protocolo e à complexidade que este período de transição comporta, existem inúmeras implicações de segurança que devem ser consideradas neste período de migração. O objetivo principal deste trabalho é definir um conjunto de boas práticas no âmbito da segurança na implementação do IPv6 que possa ser utilizado pelos administradores de redes de dados e pelas equipas de segurança dos diversos players no mercado. Nesta fase de transição, é de todo útil e conveniente contribuir de forma eficiente na interpretação dos pontos fortes deste novo protocolo assim como nas vulnerabilidades a ele associadas.IPv6 was developed to address the exhaustion of IPv4 addresses, but has not yet seen global deployment. Recent trends are now finally changing this picture and IPv6 is expected to take off soon. Contrary to the original, this new version of the Internet Protocol has security as a design goal, for example with its mandatory support for network layer security. However, due to the immaturity of the protocol and the complexity of the transition period, there are several security implications that have to be considered when deploying IPv6. In this project, our goal is to define a set of best practices for IPv6 Security that could be used by IT staff and network administrators within an Internet Service Provider. To this end, an assessment of some of the available security techniques for IPv6 will be made by means of a set of laboratory experiments using real equipment from an Internet Service Provider in Portugal. As the transition for IPv6 seems inevitable this work can help ISPs in understanding the threats that exist in IPv6 networks and some of the prophylactic measures available, by offering recommendations to protect internal as well as customers’ networks

Routing and Mobility on IPv6 over LoWPAN

The IoT means a world-wide network of interconnected objects based on standard communication protocols. An object in this context is a quotidian physical device augmented with sensing/actuating, processing, storing and communication capabilities. These objects must be able to interact with the surrounding environment where they are placed and to cooperate with neighbouring objects in order to accomplish a common objective. The IoT objects have also the capabilities of converting the sensed data into automated instructions and communicating them to other objects through the communication networks, avoiding the human intervention in several tasks. Most of IoT deployments are based on small devices with restricted computational resources and energy constraints. For this reason, initially the scientific community did not consider the use of IP protocol suite in this scenarios because there was the perception that it was too heavy to the available resources on such devices. Meanwhile, the scientific community and the industry started to rethink about the use of IP protocol suite in all IoT devices and now it is considered as the solution to provide connectivity between the IoT devices, independently of the Layer 2 protocol in use, and to connect them to the Internet. Despite the use of IP suite protocol in all devices and the amount of solutions proposed, many open issues remain unsolved in order to reach a seamless integration between the IoT and the Internet and to provide the conditions to IoT service widespread. This thesis addressed the challenges associated with the interconnectivity between the Internet and the IoT devices and with the security aspects of the IoT. In the interconnectivity between the IoT devices and the Internet the problem is how to provide valuable information to the Internet connected devices, independently of the supported IP protocol version, without being necessary accessed directly to the IoT nodes. In order to solve this problem, solutions based on Representational state transfer (REST) web services and IPv4 to IPv6 dual stack transition mechanism were proposed and evaluated. The REST web service and the transition mechanism runs only at the border router without penalizing the IoT constrained devices. The mitigation of the effects of internal and external security attacks minimizing the overhead imposed on the IoT devices is the security challenge addressed in this thesis. Three different solutions were proposed. The first is a mechanism to prevent remotely initiated transport level Denial of Service attacks that avoids the use of inefficient and hard to manage traditional firewalls. It is based on filtering at the border router the traffic received from the Internet and destined to the IoT network according to the conditions announced by each IoT device. The second is a network access security framework that can be used to control the nodes that have access to the network, based on administrative approval, and to enforce security compliance to the authorized nodes. The third is a network admission control framework that prevents IoT unauthorized nodes to communicate with IoT authorized nodes or with the Internet, which drastically reduces the number of possible security attacks. The network admission control was also exploited as a management mechanism as it can be used to manage the network size in terms of number of nodes, making the network more manageable, increasing its reliability and extending its lifetime.A IoT (Internet of Things) tem suscitado o interesse tanto da comunidade académica como da indústria, uma vez que os campos de aplicação são inúmeros assim como os potenciais ganhos que podem ser obtidos através do uso deste tipo de tecnologia. A IoT significa uma rede global de objetos ligados entre si através de uma rede de comunicações baseada em protocolos standard. Neste contexto, um objeto é um objeto físico do dia a dia ao qual foi adicionada a capacidade de medir e de atuar sobre variáveis físicas, de processar e armazenar dados e de comunicar. Estes objetos têm a capacidade de interagir com o meio ambiente envolvente e de cooperar com outros objetos vizinhos de forma a atingirem um objetivo comum. Estes objetos também têm a capacidade de converter os dados lidos em instruções e de as comunicar a outros objetos através da rede de comunicações, evitando desta forma a intervenção humana em diversas tarefas. A maior parte das concretizações de sistemas IoT são baseados em pequenos dispositivos autónomos com restrições ao nível dos recursos computacionais e de retenção de energia. Por esta razão, inicialmente a comunidade científica não considerou adequado o uso da pilha protocolar IP neste tipo de dispositivos, uma vez que havia a perceção de que era muito pesada para os recursos computacionais disponíveis. Entretanto, a comunidade científica e a indústria retomaram a discussão acerca dos benefícios do uso da pilha protocolar em todos os dispositivos da IoT e atualmente é considerada a solução para estabelecer a conetividade entre os dispositivos IoT independentemente do protocolo da camada dois em uso e para os ligar à Internet. Apesar do uso da pilha protocolar IP em todos os dispositivos e da quantidade de soluções propostas, são vários os problemas por resolver no que concerne à integração contínua e sem interrupções da IoT na Internet e de criar as condições para a adoção generalizada deste tipo de tecnologias. Esta tese versa sobre os desafios associados à integração da IoT na Internet e dos aspetos de segurança da IoT. Relativamente à integração da IoT na Internet o problema é como fornecer informação válida aos dispositivos ligados à Internet, independentemente da versão do protocolo IP em uso, evitando o acesso direto aos dispositivos IoT. Para a resolução deste problema foram propostas e avaliadas soluções baseadas em web services REST e em mecanismos de transição IPv4 para IPv6 do tipo pilha dupla (dual stack). O web service e o mecanismo de transição são suportados apenas no router de fronteira, sem penalizar os dispositivos IoT. No que concerne à segurança, o problema é mitigar os efeitos dos ataques de segurança internos e externos iniciados local e remotamente. Foram propostas três soluções diferentes, a primeira é um mecanismo que minimiza os efeitos dos ataques de negação de serviço com origem na Internet e que evita o uso de mecanismos de firewalls ineficientes e de gestão complexa. Este mecanismo filtra no router de fronteira o tráfego com origem na Internet é destinado à IoT de acordo com as condições anunciadas por cada um dos dispositivos IoT da rede. A segunda solução, é uma framework de network admission control que controla quais os dispositivos que podem aceder à rede com base na autorização administrativa e que aplica políticas de conformidade relativas à segurança aos dispositivos autorizados. A terceira é um mecanismo de network admission control para redes 6LoWPAN que evita que dispositivos não autorizados comuniquem com outros dispositivos legítimos e com a Internet o que reduz drasticamente o número de ataques à segurança. Este mecanismo também foi explorado como um mecanismo de gestão uma vez que pode ser utilizado a dimensão da rede quanto ao número de dispositivos, tornando-a mais fácil de gerir e aumentando a sua fiabilidade e o seu tempo de vida

Enhanced Trust-nd Protocol To Prevent Temporal Denial-of-service Vulnerabilities On Ipv6 Link-local Network

Trust-ND is a trust-based distributed security mechanism to secure IPv6 link-local networks as an alternative to the highly complex Secure Neighbor Discovery (SEND) protocol. However, theoretical analysis and experimental research revealed that the Trust-ND protocol is susceptible to temporal Denial-of-Service vulnerabilities due to timestamp reference, field size and format, and verification rule. This research aims to prevent temporal DoS vulnerabilities on IPv6 link-local networks by enhancing Trust-ND without jeopardizing its original structure to retain its advantages over SEND. The proposed enhanced version of Trust-ND, called eTrustND, addresses the vulnerabilities in three stages, (i) Timestamp Formulation, (ii) Enhanced Trust-ND, and (iii) Rule-based verification mechanism. The first stage changes the reference time from system time to UTC, the 24-hour time format in hexadecimal to epoch second in integer. It also increases the precision from one hundredth to one ten-thousandth second. The second stage utilizes the Trust-ND’s Reserved field for the sub-second value and changes the timestamp field data type from byte to IntField. The third stage proposes a rule-based verification mechanism to handle out-of-sync computer clocks, preventing temporal DoS vulnerabilities. The experiment results on a testbed demonstrate that eTrustND prevents temporal-based DoS vulnerabilities without jeopardizing the original Trust-ND packet structure and adding overheads (computation and bandwidth)

Trust Management and Security in Satellite Telecommand Processing

New standards and initiatives in satellite system architecture are moving the space industry to more open and efficient mission operations. Primarily, these standards allow multiple missions to share standard ground and space based resources to reduce mission development and sustainment costs. With the benefits of these new concepts comes added risk associated with threats to the security of our critical space assets in a contested space and cyberspace domain. As one method to mitigate threats to space missions, this research develops, implements, and tests the Consolidated Trust Management System (CTMS) for satellite flight software. The CTMS architecture was developed using design requirements and features of Trust Management Systems (TMS) presented in the field of distributed information systems. This research advances the state of the art with the CTMS by refining and consolidating existing TMS theory and applying it to satellite systems. The feasibility and performance of this new CTMS architecture is demonstrated with a realistic implementation in satellite flight software and testing in an emulated satellite system environment. The system is tested with known threat modeling techniques and a specific forgery attack abuse case of satellite telecommanding functions. The CTMS test results show the promise of this technique to enhance security in satellite flight software telecommand processing. With this work, a new class of satellite protection mechanisms is established, which addresses the complex security issues facing satellite operations today. This work also fills a critical shortfall in validated security mechanisms for implementation in both public and private sector satellite systems

REVIEW ON IPV6 SECURITY VULNERABILITY ISSUES AND MITIGATION METHODS

ABSTRACT One of the main purposes of Internet Protocol version 6 (IPv6

ICMPv6 Echo Request Ddos Attack Detection Framework Using Backpropagation Neural Network

Pertumbuhan pesat Internet dalam beberapa tahun kebelakangan ini telah mendedahkan had ruang alamat dalam protokol Internet semasa (IP), iaitu, IPv4. Permintaan yang semakin meningkat dalam penggunaan alamat IP telah mengakibatkan kehabisan alamat IPv4 seperti yang dijangkakan. Untuk menangani kebimbangan ini, IPv6 baru telah dibangunkan untuk menyediakan ruang alamat yang mencukupi. IPv6 dimuatkan dengan protokol baru, iaitu, versi Protokol Mesej Kawalan Internet 6 (ICMPv6), dan protokol baru ini membuka pintu bagi penyerang untuk menyerang rangkaian IPv6. Salah satu jenis serangan yang paling kerap dalam rangkaian IPv6 pada lapisan rangkaian adalah satu serangan banjir ICMPv6 DoS / DDoS. Laporan Arbor Network pada tahun 2014 menunjukkan bahawa ancaman terhadap IPv6 semakin meningkat (72% merupakan kebanjiran trafik/serangan DDoS). Di samping itu, ICMPv6 adalah protokol wajib dalam rangkaian IPv6 tidak seperti dalam IPv4, iaitu ICMP boleh disekat atau diturunkan melalui get laluan lalai. The rapid growth of the Internet in the last few years have exposed the limitation of address space in the current Internet protocol (IP) namely IPv4, due to the increasing consumption of IP addresses. The IPv6 has been developed to provide sufficient address space. It ships with a new protocol. i.e., the Internet Control Message Protocol version 6 (ICMPv6), this protocol is a mandatory protocol in IPv6 networks unlike in IPv4, in which ICMP can be blocked or dropped. ICMPv6 opens the door for attackers to attack IPv6 networks. The most frequent types of attack in IPv6 networks at the network layer is an ICMPv6 DDoS flooding attack. One of the main problem in ICMPv6 DDoS flooding attacks is accuracy detection, which suffers from a high false alarm rate. Thus, protecting infrastructure service is a critical issue that urgently needs to be addressed

Addressless: A New Internet Server Model to Prevent Network Scanning

Eliminating unnecessary exposure is a principle of server security. The huge IPv6 address space enhances security by making scanning infeasible, however, with recent advances of IPv6 scanning technologies, network scanning is again threatening server security. In this paper, we propose a new model named addressless server, which separates the server into an entrance module and a main service module, and assigns an IPv6 prefix instead of an IPv6 address to the main service module. The entrance module generates a legitimate IPv6 address under this prefix by encrypting the client address, so that the client can access the main server on a destination address that is different in each connection. In this way, the model provides isolation to the main server, prevents network scanning, and minimizes exposure. Moreover it provides a novel framework that supports flexible load balancing, high-availability, and other desirable features. The model is simple and does not require any modification to the client or the network. We implement a prototype and experiments show that our model can prevent the main server from being scanned at a slight performance cost

Securing home and correspondent registrations in mobile IPv6 networks

The Mobile IPv6 (MIPv6) protocol enables mobile nodes (MNs) to remain connected to other correspondent nodes (CNs) while roaming the IPv6 Internet. Home and correspondent registrations are essential parts of the MIPv6 protocol, whereby MNs register their care-of addresses (CoAs) with their home agents (HAs) and with their CNs, respectively. Security provision for home and correspondent registrations is a fundamental part of the MIPv6 protocol and has been an open research issue since the early stages of the protocol.This thesis examines state-of-the-art protocols for securing home and correspondent registrations in MIPv6 networks. The strengths and weaknesses of these protocols are discussed. The investigation of these protocols leads to the proposal of an enhanced home registration protocol and a family of correspondent registration protocols. The Enhanced Home Registration (EHR) protocol extends the basic home registration protocol defined in MIPv6 to support the location authentication of MNs to their HAs. The EHR is based on novel ideas of segmenting the IPv6 address space, using a symmetric CGA-based technique for generating CoAs, and applying concurrent CoAs reachability tests. As a result, EHR is able to reduce the likelihood of a malicious MN being successful in luring an HA to flood a third party with useless packets using MIPv6. In addition, EHR enables HAs to help in correspondent registrations by confirming MNs' CoAs to CNs. Simulation studies of EHR have shown that it only introduces a marginal increase in the registration delay, but a significant increase in the signalling overhead as a cost of supporting the location authentication of MNs.The thesis also proposes a family of correspondent registration protocols. These protocols rely on the assistance of home networks to confirm the MNs' ownership of the claimed HoAs and CoAs. The protocols consist of three phases: a creation phase, an update phase and a deletion phase. Informal and formal protocol analyses have confirmed the protocols' correctness and satisfaction of the required security properties. The protocols have been simulated extensively and the results show that they produce lower registration delay and a reduction in the signalling overhead during update and deletion phases. This is at the cost of a varying increase, depending on the protocol variant, in the registration delay and signalling overhead during the creation phase.EThOS - Electronic Theses Online ServiceEgyptian GovernmentGBUnited Kingdo