152 research outputs found
Linearization of Time-encoded ADCs Architectures for Smart MEMS Sensors in Low Power CMOS Technology
Mención Internacional en el título de doctorIn the last few years, the development of mobile technologies and machine learning
applications has increased the demand of MEMS-based digital microphones.
Mobile devices have several microphones enabling noise canceling, acoustic beamforming
and speech recognition. With the development of machine learning applications
the interest to integrate sensors with neural networks has increased.
This has driven the interest to develop digital microphones in nanometer CMOS
nodes where the microphone analog-front end and digital processing, potentially
including neural networks, is integrated on the same chip.
Traditionally, analog-to-digital converters (ADCs) in digital microphones have
been implemented using high order Sigma-Delta modulators. The most common
technique to implement these high order Sigma-Selta modulators is switchedcapacitor
CMOS circuits. Recently, to reduce power consumption and make them
more suitable for tasks that require always-on operation, such as keyword recognition,
switched-capacitor circuits have been improved using inverter-based operational
amplifier integrators. Alternatively, switched-capacitor based Sigma-
Delta modulators have been replaced by continuous time Sigma-Delta converters.
Nevertheless, in both implementations the input signal is voltage encoded
across the modulator, making the integration in smaller CMOS nodes more challenging
due to the reduced voltage supply.
An alternative technique consists on encoding the input signal on time (or
frequency) instead of voltage. This is what time-encoded converters do. Lately,
time-encoding converters have gained popularity as they are more suitable to
nanometer CMOS nodes than Sigma-Delta converters. Among the ones that have
drawn more interest we find voltage-controlled oscillator based ADCs (VCOADCs).
VCO-ADCs can be implemented using CMOS inverter based ring oscillators
(RO) and digital circuitry. They also show noise-shaping properties.
This makes them a very interesting alternative for implementation of ADCs in
nanometer CMOS nodes. Nevertheless, two main circuit impairments are present
in VCO-ADCs, and both come from the oscillator non-idealities. The first of them
is the oscillator phase noise, that reduces the resolution of the ADC. The second
is the non-linear tuning curve of the oscillator, that results in harmonic distortion
at medium to high input amplitudes.
In this thesis we analyze the use of time encoding ADCs for MEMS microphones
with special focus on ring oscillator based ADCs (RO-ADCs). Firstly, we
study the use of a dual-slope based SAR noise shaped quantizer (SAR-NSQ) in
sigma-delta loops. This quantizer adds and extra level of noise-shaping to the modulator, improving the resolution. The quantizer is explained, and equations
for the noise transfer function (NTF) of a third order sigma-delta using a second
order filter and the NSQ are presented.
Secondly, we move our attention to the topic of RO-ADCs. We present a high
dynamic range MEMS microphone 130nm CMOS chip based on an open-loop
VCO-ADC. This dissertation shows the implementation of the analog front-end
that includes the oscillator and the MEMS interface, with a focus on achieving
low power consumption with low noise and a high dynamic range. The digital
circuitry is left to be explained by the coauthor of the chip in his dissertation. The
chip achieves a 80dBA peak SNDR and 108dB dynamic range with a THD of 1.5%
at 128 dBSPL with a power consumption of 438μW.
After that, we analyze the use of a frequency-dependent-resistor (FDR) to implement
an unsampled feedback loop around the oscillator. The objective is to reduce
distortion. Additionally phase noise mitigation is achieved. A first topology
including an operational amplifier to increase the loop gain is analyzed. The design
is silicon proven in a 130 nm CMOS chip that achieves a 84 dBA peak SNDR
with an analog power consumption of 600μW. A second topology without the
operational amplifier is also analyzed. Two chips are designed with this topology.
The first chip in 130 nm CMOS is a full VCO-ADC including the frequencyto-
digital converter (F2D). This chip achieves a peak SNDR of 76.6 dBA with a
power consumption of 482μW. The second chip includes only the oscillator and
is implemented in 55nm CMOS. The peak SNDR is 78.15 dBA and the analog
power consumption is 153μW.
To finish this thesis, two circuits that use an FDR with a ring oscillator are
presented. The first is a capacity-to-digital converter (CDC). The second is a filter
made with an FDR and an oscillator intended for voice activity detection tasks
(VAD).En los últimos años, el desarrollo de las tecnologías móviles y las aplicaciones de
machine-learning han aumentado la demanda de micrófonos digitales basados
en MEMS. Los dipositivos móviles tienen varios micrófonos que permiten la cancelación
de ruido, el beamforming o conformación de haces y el reconocimiento
de voz. Con el desarrollo de aplicaciones de aprendizaje automático, el interés
por integrar sensores con redes neuronales ha aumentado. Esto ha impulsado el
interés por desarrollar micrófonos digitales en nodos CMOS nanométricos donde
el front-end analógico y el procesamiento digital del micrófono, que puede
incluir redes neuronales, está integrado en el mismo chip.
Tradicionalmente, los convertidores analógicos-digitales (ADC) en micrófonos
digitales han sido implementados utilizando moduladores Sigma-Delta de
orden elevado. La técnica más común para implementar estos moduladores Sigma-
Delta es el uso de circuitos CMOS de capacidades conmutadas. Recientemente,
para reducir el consumo de potencia y hacerlos más adecuados para las tareas que
requieren una operación continua, como el reconocimiento de palabras clave, los
convertidores Sigma-Delta de capacidades conmutadas has sido mejorados con
el uso de integradores implementados con amplificadores operacionales basados
en inversores CMOS. Alternativamente, los Sigma-Delta de capacidades conmutadas
han sido reemplazados por moduladores en tiempo continuo. No obstante,
en ambas implementaciones, la señal de entrada es codificada en voltaje durante
el proceso de conversión, lo que hace que la integración en nodos CMOS más
pequeños sea complicada debido a la menor tensión de alimentación.
Una técnica alternativa consiste en codificar la señal de entrada en tiempo (o
frecuencia) en lugar de tensión. Esto es lo que hacen los convertidores de codificación
temporal. Recientemente, los convertidores de codificación temporal
han ganado popularidad ya que son más adecuados para nodos CMOS nanométricos
que los convertidores Sigma-Delta. Entre los que más interés han despertado
encontramos los ADCs basados en osciladores controlados por tensión
(VCO-ADC). Los VCO-ADC se pueden implementar usando osciladores en anillo
(RO) implementados con inversores CMOS y circuitos digitales. Esta familia
de convertidores también tiene conformado de ruido. Esto los convierte en una
alternativa muy interesante para la implementación de convertidores en nodos
CMOS nanométricos. Sin embargo, dos problemas principales están presentes en
este tipo de ADCs debidos ambos a las no idealidades del oscilador. El primero
de los problemas es la presencia de ruido de fase en el oscilador, lo que reduce la resolución del ADC. El segundo es la curva de conversion voltaje-frecuencia no
lineal del oscilador, lo que causa distorsión a amplitudes medias y altas.
En esta tesis analizamos el uso de ADCs de codificación temporal para micrófonos
MEMS, con especial interés en ADCS basados en osciladores de anillo
(RO-ADC). En primer lugar, estudiamos el uso de un cuantificador SAR con conformado
de ruido (SAR-NSQ) en moduladores Sigma-Delta. Este cuantificador
agrega un orden adicional de conformado de ruido al modulador, mejorando la
resolución. En este documento se explica el cuantificador y obtienen las ecuaciones
para la función de transferencia de ruido (NTF) de un sigma-delta de tercer
orden usando un filtro de segundo orden y el NSQ.
En segundo lugar, dirigimos nuestra atención al tema de los RO-ADC. Presentamos
el chip de un micrófono MEMS de alto rango dinámico en CMOS de
130 nm basado en un VCO-ADC de bucle abierto. En esta tesis se explica la implementación
del front-end analógico que incluye el oscilador y la interfaz con
el MEMS. Esta implementación se ha llevado a cabo con el objetivo de lograr un
bajo consumo de potencia, un bajo nivel de ruido y un alto rango dinámico. La
descripción del back-end digital se deja para la tesis del couator del chip. La
SNDR de pico del chip es de 80dBA y el rango dinámico de 108dB con una THD
de 1,5% a 128 dBSPL y un consumo de potencia de 438μW.
Finalmente, se analiza el uso de una resistencia dependiente de frecuencia
(FDR) para implementar un bucle de realimentación no muestreado alrededor
del oscilador. El objetivo es reducir la distorsión. Además, también se logra la
mitigación del ruido de fase del oscilador. Se analyza una primera topologia de
realimentación incluyendo un amplificador operacional para incrementar la ganancia
de bucle. Este diseño se prueba en silicio en un chip CMOS de 130nm que
logra un pico de SNDR de 84 dBA con un consumo de potencia de 600μW en la
parte analógica. Seguidamente, se analiza una segunda topología sin el amplificador
operacional. Se fabrican y miden dos chips diseñados con esta topologia.
El primero de ellos en CMOS de 130 nm es un VCO-ADC completo que incluye
el convertidor de frecuencia a digital (F2D). Este chip alcanza un pico SNDR de
76,6 dBA con un consumo de potencia de 482μW. El segundo incluye solo el oscilador
y está implementado en CMOS de 55nm. El pico SNDR es 78.15 dBA y el
el consumo de potencia analógica es de 153μW.
Para cerrar esta tesis, se presentan dos circuitos que usan la FDR con un oscilador
en anillo. El primero es un convertidor de capacidad a digital (CDC). El
segundo es un filtro realizado con una FDR y un oscilador, enfocado a tareas de
detección de voz (VAD).Programa de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de MadridPresidente: Antonio Jesús Torralba Silgado.- Secretaria: María Luisa López Vallejo.- Vocal: Pieter Rombout
K-Delta-1-Sigma Modulators for Wideband Analog-to-Digital Conversion
As CMOS technology scales, the transistor speed increases enabling higher speed communications and more complex systems. These benefits come at the cost of decreasing inherent device gain, increased transistor leakage currents, and additional mismatches due to process variations. All of these drawbacks affect the design of high-resolution analog-to-digital converters (ADCs) in nano-CMOS processes. To move towards an ADC topology useful in these small processes a first-order K-Delta-1-Sigma (KD1S) modulator-based ADC was proposed. The KD1S topology employs inherent time-interleaving with a shared integrator and K-quantizing feedback paths and can potentially achieve significantly higher conversion bandwidths when compared to the traditional switched-capacitor delta-sigma ADCs. The shared integrator in the KD1S modulator settles over a half the clock period and the op-amp is designed to operate at the base clock frequency.
In this dissertation, the first-order KD1S modulator topology is analyzed for the effects of the non-idealities introduced by the K-path operation of the switched-capacitor integrator. Then, the concept of KD1S modulator is extended to higher-order modulators in order to achieve superior noise-shaping performance. A systematic synthesis method has been developed to design and simulate higher-order KD1S modulators at the system level. In order to demonstrate the developed theory, a prototype second-order KD1S modulator has been designed and fabricated in a 500-nm CMOS technology. The second-order KD1S modulator exhibits wideband noise-shaping with an SNDR of 42.7 dB or 6.81 bits in resolution for Kpath = 8 paths, an effective sampling rate of ƒs,new=800 MHz, effective oversampling ratio Kpath•OSR=64 and a signal bandwidth of 6.25 MHz. The second-order KD1S modulator consumes an average current of 3.0 mA from the 5 V supply and occupies an area of 0.55 mm2
Design of a 14-bit fully differential discrete time delta-sigma modulator
Analog to digital converters play an essential role in modern mixed signal circuit design. Conventional Nyquist-rate converters require analog components that are precise and highly immune to noise and interference. In contrast, oversampling converters can be implemented using simple and high-tolerance analog components. Moreover, sampling at high frequency eliminates the need for abrupt cutoffs in the analog anti-aliasing filters. A noise shaping technique is also used in DS converters in addition to oversampling to achieve a high resolution conversion. A significant advantage of the method is that analog signals are converted using simple and high-tolerance analog circuits, usually a 1-bit comparator, and analog signal processing circuits having a precision that is usually much less than the resolution of the overall converter. In this thesis, a technique to design the discrete time DS converters for 25 kHz baseband signal bandwidth will be described. The noise shaping is achieved using a switched capacitor low-pass integrator around the 1-bit quantizer loop. A latched-type comparator is used as the quantizer of the DS converter. A second order DS modulator is implemented in a TSMC 0.35 µm CMOS technology using a 3.3 V power supply. The peak signal-to-noise ratio (SNR) simulated is 87 dB; the SNDR simulated is 82 dB which corresponds to a resolution of 14 bits. The total static power dissipation is 6.6 mW
Data acquisition techniques based on frequency-encoding applied to capacitive MEMS microphones
Mención Internacional en el título de doctorThis thesis focuses on the development of capacitive sensor readout circuits
and data converters based on frequency-encoding. This research
has been motivated by the needs of consumer electronics industry, which
constantly demands more compact readout circuit for MEMS microphones
and other sensors. Nowadays, data acquisition is mainly based
on encoding signals in voltage or current domains, which is becoming
more challenging in modern deep submicron CMOS technologies.
Frequency-encoding is an emerging signal processing technique based
on encoding signals in the frequency domain. The key advantage of
this approach is that systems can be implemented using mostly-digital
circuitry, which benefits from CMOS technology scaling. Frequencyencoding
can be used to build phase referenced integrators, which can
replace classical integrators (such as switched-capacitor based integrators)
in the implementation of efficient analog-to-digital converters and
sensor interfaces. The core of the phase referenced integrators studied in
this thesis consists of the combination of different oscillator topologies
with counters and highly-digital circuitry.
This work addresses two related problems: the development of capacitive
MEMS sensor readout circuits based on frequency-encoding, and the
design and implementation of compact oscillator-based data converters
for audio applications.
In the first problem, the target is the integration of the MEMS sensor
into an oscillator circuit, making the oscillation frequency dependent on
the sensor capacitance. This way, the sound can be digitized by measuring
the oscillation frequency, using digital circuitry. However, a MEMS
microphone is a complex structure on which several parasitic effects can
influence the operation of the oscillator. This work presents a feasibility
analysis of the integration of a MEMS microphone into different oscillator
topologies. The conclusion of this study is that the parasitics of the
MEMS limit the performance of the microphone, making it inefficient.
In contrast, replacing conventional ADCs with frequency-encoding based
ADCs has proven a very efficient solution, which motivates the next
problem.
In the second problem, the focus is on the development of high-order
oscillator-based Sigma-Delta modulators. Firstly, the equivalence between classical
integrators and phase referenced integrators has been studied, followed
by an overview of state-of-art oscillator-based converters. Then,
a procedure to replace classical integrators by phase referenced integrators
is presented, including a design example of a second-order oscillator based
Sigma-Delta modulator. Subsequently, the main circuit impairments that
limit the performance of this kind of implementations, such as phase
noise, jitter or metastability, are described.
This thesis also presents a methodology to evaluate the impact of
phase noise and distortion in oscillator-based systems. The proposed
method is based on periodic steady-state analysis, which allows the rapid
estimation of the system dynamic range without resorting to transient
simulations. In addition, a novel technique to analyze the impact of
clock jitter in Sigma-Delta modulators is described.
Two integrated circuits have been implemented in 0.13 μm CMOS
technology to demonstrate the feasibility of high-order oscillator-based Sigma-Delta modulators. Both chips have been designed to feature secondorder
noise shaping using only oscillators and digital circuitry. The first
testchip shows a malfunction in the digital circuitry due to the complexity
of the multi-bit counters. The second chip, implemented using
single-bit counters for simplicity, shows second-order noise shaping and
reaches 103 dB-A of dynamic range in the audio bandwidth, occupying
only 0.04 mm2.Esta tesis se centra en el desarrollo de conversores de datos e interfaces
para sensores capacitivos basados en codificación en frecuencia. Esta
investigación está motivada por las necesidades de la industria, que constantemente
demanda reducir el tamaño de este tipo de circuitos. Hoy en
día, la adquisición de datos está basada principalmente en la codificación
de señales en tensión o en corriente. Sin embargo, la implementación
de este tipo de soluciones en tecnologías CMOS nanométricas presenta
varias dificultades.
La codificación de frecuencia es una técnica emergente en el procesado
de señales basada en codificar señales en el dominio de la frecuencia.
La principal ventaja de esta alternativa es que los sistemas pueden implementarse
usando circuitos mayoritariamente digitales, los cuales se
benefician de los avances de la tecnología CMOS. La codificación en
frecuencia puede emplearse para construir integradores referidos a la
fase, que pueden reemplazar a los integradores clásicos (como los basados
en capacidades conmutadas) en la implementación de conversores
analógico-digital e interfaces de sensores. Los integradores referidos a la
fase estudiados en esta tesis consisten en la combinación de diferentes
topologías de osciladores con contadores y circuitos principalmente digitales.
Este trabajo aborda dos cuestiones relacionadas: el desarrollo de circuitos
de lectura para sensores MEMS capacitivos basados en codificación
temporal, y el diseño e implementación de conversores de datos
compactos para aplicaciones de audio basados en osciladores.
En el primer caso, el objetivo es la integración de un sensor MEMS
en un oscilador, haciendo que la frecuencia de oscilación depe capacidad del sensor. De esta forma, el sonido puede ser digitalizado
midiendo la frecuencia de oscilación, lo cual puede realizarse usando circuitos
en su mayor parte digitales. Sin embargo, un micrófono MEMS es
una estructura compleja en la que múltiples efectos parasíticos pueden
alterar el correcto funcionamiento del oscilador. Este trabajo presenta
un análisis de la viabilidad de integrar un micrófono MEMS en diferentes
topologías de oscilador. La conclusión de este estudio es que los parasíticos
del MEMS limitan el rendimiento del micrófono, causando que esta
solución no sea eficiente. En cambio, la implementación de conversores
analógico-digitales basados en codificación en frecuencia ha demostrado
ser una alternativa muy eficiente, lo cual motiva el estudio del siguiente
problema.
La segunda cuestión está centrada en el desarrollo de moduladores Sigma-Delta de alto orden basados en osciladores. En primer lugar se ha estudiado
la equivalencia entre los integradores clásicos y los integradores
referidos a la fase, seguido de una descripción de los conversores basados
en osciladores publicados en los últimos años. A continuación se
presenta un procedimiento para reemplazar integradores clásicos por integradores
referidos a la fase, incluyendo un ejemplo de diseño de un
modulador Sigma-Delta de segundo orden basado en osciladores. Posteriormente
se describen los principales problemas que limitan el rendimiento de este
tipo de sistemas, como el ruido de fase, el jitter o la metaestabilidad.
Esta tesis también presenta un nuevo método para evaluar el impacto
del ruido de fase y de la distorsión en sistemas basados en osciladores. El
método propuesto está basado en simulaciones PSS, las cuales permiten
la rápida estimación del rango dinámico del sistema sin necesidad de
recurrir a simulaciones temporales. Además, este trabajo describe una
nueva técnica para analizar el impacto del jitter de reloj en moduladores Sigma-Delta.
En esta tesis se han implementado dos circuitos integrados en tecnología
CMOS de 0.13 μm, con el fin de demostrar la viabilidad de los
moduladores Sigma-Delta de alto orden basados en osciladores. Ambos chips han
sido diseñados para producir conformación espectral de ruido de segundo
orden, usando únicamente osciladores y circuitos mayoritariamente digitales.
El primer chip ha mostrado un error en el funcionamiento de los
circuitos digitales debido a la complejidad de las estructuras multi-bit
utilizadas. El segundo chip, implementado usando contadores de un solo
bit con el fin de simplificar el sistema, consigue conformación espectral
de ruido de segundo orden y alcanza 103 dB-A de rango dinámico en el
ancho de banda del audio, ocupando solo 0.04 mm2.Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y AutomáticaPresidente: Georges G.E. Gielen.- Secretario: José Manuel de la Rosa.- Vocal: Ana Rus
Hybrid microfluidic CMOS capacitive sensors for lab-on-chip applications
Methods and applications of CMOS-based Locs -- Hybrid microfluidic/cmos platform -- Cmos based capacitive sensors for locs -- Direct-write microfluidic packaging procedure -- Core-cbcm capacitive sensor array for locs
CARE-HHH-APD Workshop on Finalizing the Roadmap for the Upgrade of the CERN and GSI Accelerator Complex
This report contains the Proceedings of the CARE-HHH-APD Event BEAM’07, “Finalizing the Roadmap for the Upgrade of the CERN & GSI Accelerator Complex,” which was held at CERN in Geneva, Switzerland, from 1 to 5 October 2007. BEAM’07 was primarily devoted to beam dynamics limitations for the two, or three, alternative baseline scenarios of the LHC luminosity upgrade and to critical design choices for the upgrade of the LHC injector complex at CERN and for the FAIR complex at GSI. It comprised five parts: (1) a Mini-Workshop on LHC+ Beam Performance, (2) a CERN-GSI Meeting on Collective Effects, (3) the Francesco Ruggiero Memorial Symposium, (4) a Mini-Workshop on the LHC Injectors Upgrade, and (5) the BEAM’07 Summaries. Topics addressed in the first mini-workshop of BEAM’07 ranged from the luminosity performance reach of the upgraded LHC in different scenarios, over the generation and stability of the future LHC beams, the turnaround time, beam–beam effects, luminosity levelling methods, and beam–beam compensation techniques, to advanced collimation schemes. The second mini-workshop of BEAM’07 and the integrated CERN-GSI meeting covered the superconducting proton linac (SPL), the PS2, and the upgraded SPS at CERN, as well as critical issues of the FAIR design. Here issues of electron cloud, space charge, beam impedance, the generation and the stability of future LHC beams in the PS and SPS, beam loss handling, and beam stability aspects for the FAIR rings were discussed. At BEAM’07 inter-laboratory collaborations could be reinforced and valuable experiences from several other facilities were presented, including superconducting linac operation and laser stripping at SNS, ESS R&D, long-range beam–beam effects at RHIC, and luminosity-levelling attempts at the Tevatron
Linear Operation of Switch-Mode Outphasing Power Amplifiers
Radio transceivers are playing an increasingly important role in modern society. The
”connected” lifestyle has been enabled by modern wireless communications. The demand
that has been placed on current wireless and cellular infrastructure requires increased spectral
efficiency however this has come at the cost of power efficiency. This work investigates
methods of improving wireless transceiver efficiency by enabling more efficient power
amplifier architectures, specifically examining the role of switch-mode power amplifiers in
macro cell scenarios. Our research focuses on the mechanisms within outphasing power
amplifiers which prevent linear amplification. From the analysis it was clear that high power
non-linear effects are correctable with currently available techniques however non-linear effects
around the zero crossing point are not. As a result signal processing techniques for suppressing
and avoiding non-linear operation in low power regions are explored. A novel method of digital
pre-distortion is presented, and conventional techniques for linearisation are adapted for the
particular needs of the outphasing power amplifier. More unconventional signal processing
techniques are presented to aid linearisation of the outphasing power amplifier, both zero
crossing and bandwidth expansion reduction methods are designed to avoid operation in nonlinear
regions of the amplifiers. In combination with digital pre-distortion the techniques
will improve linearisation efforts on outphasing systems with dynamic range and bandwidth
constraints respectively.
Our collaboration with NXP provided access to a digital outphasing power amplifier,
enabling empirical analysis of non-linear behaviour and comparative analysis of behavioural
modelling and linearisation efforts. The collaboration resulted in a bench mark for linear
wideband operation of a digital outphasing power amplifier. The complimentary linearisation
techniques, bandwidth expansion reduction and zero crossing reduction have been evaluated in
both simulated and practical outphasing test benches. Initial results are promising and indicate
that the benefits they provide are not limited to the outphasing amplifier architecture alone.
Overall this thesis presents innovative analysis of the distortion mechanisms of the
outphasing power amplifier, highlighting the sensitivity of the system to environmental effects.
Practical and novel linearisation techniques are presented, with a focus on enabling wide band
operation for modern communications standards
- …