Radio transceivers are playing an increasingly important role in modern society. The
”connected” lifestyle has been enabled by modern wireless communications. The demand
that has been placed on current wireless and cellular infrastructure requires increased spectral
efficiency however this has come at the cost of power efficiency. This work investigates
methods of improving wireless transceiver efficiency by enabling more efficient power
amplifier architectures, specifically examining the role of switch-mode power amplifiers in
macro cell scenarios. Our research focuses on the mechanisms within outphasing power
amplifiers which prevent linear amplification. From the analysis it was clear that high power
non-linear effects are correctable with currently available techniques however non-linear effects
around the zero crossing point are not. As a result signal processing techniques for suppressing
and avoiding non-linear operation in low power regions are explored. A novel method of digital
pre-distortion is presented, and conventional techniques for linearisation are adapted for the
particular needs of the outphasing power amplifier. More unconventional signal processing
techniques are presented to aid linearisation of the outphasing power amplifier, both zero
crossing and bandwidth expansion reduction methods are designed to avoid operation in nonlinear
regions of the amplifiers. In combination with digital pre-distortion the techniques
will improve linearisation efforts on outphasing systems with dynamic range and bandwidth
constraints respectively.
Our collaboration with NXP provided access to a digital outphasing power amplifier,
enabling empirical analysis of non-linear behaviour and comparative analysis of behavioural
modelling and linearisation efforts. The collaboration resulted in a bench mark for linear
wideband operation of a digital outphasing power amplifier. The complimentary linearisation
techniques, bandwidth expansion reduction and zero crossing reduction have been evaluated in
both simulated and practical outphasing test benches. Initial results are promising and indicate
that the benefits they provide are not limited to the outphasing amplifier architecture alone.
Overall this thesis presents innovative analysis of the distortion mechanisms of the
outphasing power amplifier, highlighting the sensitivity of the system to environmental effects.
Practical and novel linearisation techniques are presented, with a focus on enabling wide band
operation for modern communications standards
