Techniques and errors in measuring cross- correlation and cross-spectral density functions

Techniques and errors in measuring cross spectral density and cross correlation functions of stationary dynamic pressure dat

Slice-Less Optical Arbitrary Waveform Measurement (OAWM) in a Bandwidth of More than 600 GHz Using Soliton Microcombs

We propose and demonstrate a novel scheme for optical arbitrary waveform measurement (OAWM) that exploits chip-scale Kerr soliton combs as highly scalable multiwavelength local oscillators (LO) for ultra-broadband full-field waveform acquisition. In contrast to earlier concepts, our approach does not require any optical slicing filters and thus lends itself to efficient implementation on state-of-the-art high-index-contrast integration platforms such as silicon photonics. The scheme allows to measure truly arbitrary waveforms with high accuracy, based on a dedicated system model which is calibrated by means of a femtosecond laser with known pulse shape. We demonstrated the viability of the approach in a proof-of-concept experiment by capturing an optical waveform that contains multiple 16 QAM and 64 QAM wavelength-division multiplexed (WDM) data signals with symbol rates of up to 80 GBd, reaching overall line rates of up to 1.92 Tbit/s within an optical acquisition bandwidth of 610 GHz. To the best of our knowledge, this is the highest bandwidth that has so far been demonstrated in an OAWM experiment

An 8-DPSK TCM modem for MSAT-X

This paper describes the real-time digital implementation of an 8-differentiated phase-shift keying (DPSK) trellis-coded modulation (TCM) modem for operation on an L-band, 5 kHz wide, land mobile satellite (LMS) channel. The modem architecture as well as some of the signal processing techniques employed in the modem to combat the LMS channel impairments are described, and the modem performance over the fading channel is presented

Behavioral modelling of GaN RF-power amplifier

Abstract. In this thesis memory effects and nonlinearities of Gallium Nitride (GaN) Doherty power amplifier (PA) were studied for measurement based behavioral modelling purposes. In SoC simulations a PA model is needed to simulate the performance of different linearization algorithms and to optimize the digital pre-distortion (DPD) design to cancel the memory effects of the PA, thus the model needs to be capable of modelling the memory effects sufficiently. Aim was to study if there were any differences in power amplifiers behavior and memory effects between time division duplexing (TDD) and frequency division duplexing (FDD) and what kind of model topologies are needed to model the PA sufficiently. In this thesis, two PAs were measured in different operation modes. Characterization setup was built, and an equalizer was characterized to remove the frequency selectivity of the test setup to obtain more accurate measurement results. Two signal bandwidths of 20MHz and 100MHz were used to extract data from power amplifier output with FDD and TDD operation. A generalized memory polynomial was fitted to model the PAs and found to be sufficient to model FDD operation. However, with TDD operation generalized memory polynomial model was not as accurate due to complex memory effects such as thermal and trapping memory. Models were also validated by using a digital pre-distorter and compared with measurement results and the models seem to work well and provide adjacent channel power ratio (ACPR) of -53.5dBc on lower channel and -53.3dBc on upper channel with 100MHz signal.GaN RF-tehovahvistimen käyttäytymistason mallinnus. Tiivistelmä. Tässä työssä tutkittiin Galliumnitraatti (GaN) Doherty-tehovahvistimen (PA) muistiilmiöitä ja epälineaarisuutta mittauksiin perustuvaa käyttäytymistason mallinnusta varten. SoC-simuloinneissa tarvitaan PA-mallia erilaisten linearisointialgoritmien suorituskyvyn simuloimiseksi. Erityisesti digitaalisen esisäröttimen (DPD) suunnittelun optimoimiseksi tehovahvistimessa esiintyvän muistin kumoamiseksi mallin on pystyttävä mallintamaan muistia riittävällä tarkkuudella. Työn tavoitteena oli selvittää, onko tehovahvistimien käyttäytymisessä ja muisti-ilmiöissä eroja aika- ja taajuusdupleksoinnin (TDD, FDD) välillä ja millaisia mallitopologioita tarvitaan, jotta tehovahvistinta voidaan mallintaa riittävällä tarkkuudella. Tässä työssä käytettiin kahta tehovahvistinta eri toimintatilojen mittaamiseen. Työssä rakennettiin mittausympäristö ja lisättiin taajuuskorjain kumoamaan mittausympäristön taajuusselektiivisyyttä. Kahta signaalinkaistanleveyttä 20 MHz:a ja 100 MHz:ä käytettiin datan keräämiseen tehovahvistimen ulostulosta aika- ja taajusjakoista dupleksointia käyttäen. Tehovahvistimen mallintamiseen sovitettiin muistipolynomi, jonka todettiin olevan riittävän tarkka FDD-toiminnan mallintamiseen, mutta TDD-toiminnassa malli ei ollut yhtä tarkka monimutkaisten muisti-ilmiöiden, kuten lämpö- ja elektronien ansoitusmuistin, vuoksi. Mallit validoitiin myös käyttämällä digitaalista esisärötystä ja niitä verrattiin mittaustuloksiin. Mallit näyttävät toimivan hyvin ja tuottavan vierekkäisen kanavan tehosuhteen (ACPR) -53,5dBc alemmalla kanavalla ja -53,3dBc ylemmällä kanavalla 100MHz signaalilla

APPLICATIONS OF ACOUSTO-OPTIC DEMODULATION AND DECODING TECHNIQUES

This thesis describes the operation and performance of an acousto-optic demodulator system consisting of a laser source, an acousto-optic cell and a bi-cell detector. The bi-cell detector is made up of two photodiodes positioned side by side, separated by a small gap. Theory is developed to predict the following; the linear operating range for different gap sizes, absolute frequency sensitivity, system output in response to discrete phase changes, optimum gap size for phase demodulation, absolute descrete phase change sensitivity, the performance of the system in the presence of carrier noise and the effect of clipping the carrier signal on both frequency and phase modulated signals. A detailed model of the system has been written, using the software package Mathcad, which incorporates all the parameters that affect the performance of the physical system. The model has been used to study how the performance of the system changes as these parameters are varied. It is shown that the AO demodulator can be used in a number of ways; as a frequency demodulator, a phase demodulator and to demodulate digitally modulated signals, and that the optimum values of some parameters are different for each application. The model is also used to investigate the response of the system to a number of the most common forms of digital modulation. It is shown that it is possible, without any a priori knowledge of the signal, to identify each of these forms of modulation, and ultimately decode messages contained on the signals. The system can also be used to measure the frequency shift on pulse doppler radar. It is shown that the rms frequency error on a pulse using the AO demodulator is 150% better than that of existing systems. Experimental results are presented that are in good agreement with the results gained from both the theoretical and modelled analysis of the system. Finally suggestions are made for areas of further work on the signal processing of the output signals and possible uses of the demodulator in the future.DRA (Funtington

Digital Demodulator for BFSK waveform based upon Correlator and Differentiator Systems

The present article relates in general to digital demodulation of Binary Frequency Shift Keying (BFSK waveform) . New processing methods for demodulating the BFSK-signals are proposed here. Based on Sampler Correlator, the hardware consumption for the proposed techniques is reduced in comparison with other reported. Theoretical details concerning limits of applicability are also given by closed-form expressions. Simulation experiments are illustrated to validate the overall performance

Application of LSI to signal detection: The deltic DFPCC

The development of the DELTIC DFPCC serial mode signal processor is discussed. The processor is designed to detect in the presence of background noise a signal coded into the zero crossings of the waveform. The unique features of the DELTIC DFPCC include versatility in handling a variety of signals and relative simplicity in implementation. A theoretical performance model is presented which predicts the expected value of the output signal as a function of the input signal to noise ratio. Experimental results obtained with the prototype system, which was breadboarded with LSI, MSI and SSI components, are given. The device was compared with other LSI schemes for signal processing and it was concluded that the DELTIC DFPCC is simpler and in some cases more versatile than other systems. With established LSI technology, low frequency systems applicable to sonar and similar problems are feasible

Characteristic of a Digital Correlation Radiometer Back End with Finite Wordlength

The performance characteristic of a digital correlation radiometer signal processing back end (DBE) is analyzed using a simulator. The particular design studied here corresponds to the airborne Hurricane Imaging radiometer which was jointly developed by the NASA Marshall Space Flight Center, University of Michigan, University of Central Florida and NOAA. Laboratory and flight test data is found to be in accord with the simulation results. Overall design seems to be optimum for the typical input signal dynamic range. It was found that the performance of the digital kurtosis could be improved by lowering the DBE input power level. An unusual scaling between digital correlation channels observed in the instrument data is confirmed to be a DBE characteristic

Experimental demonstration of digital predistortion for orthogonal frequency-division multiplexing-radio over fibre links near laser resonance

Radio over fibre (RoF), an enabling technology for distribution of wireless broadband service signals through analogue optical links, suffers from non-linear distortion. Digital predistortion has been demonstrated as an effective approach to overcome the RoF non-linearity. However, questions remain as to how the approach performs close to laser resonance, a region of significant dynamic non-linearity, and how resilient the approach is to changes in input signal and link operating conditions. In this work, the performance of a digital predistortion approach is studied for directly modulated orthogonal frequency-division multiplexing RoF links operating from 2.47 to 3.7 GHz. It extends previous works to higher frequencies, and to higher quadrature amplitude modulation (QAM) levels. In addition, the resilience of the predistortion approach to changes in modulation level of QAM schemes, and average power levels are investigated, and a novel predistortion training approach is proposed and demonstrated. Both memoryless and memory polynomial predistorter models, and a simple off-line least-squares-based identification method, are used, with excellent performance improvements demonstrated up to 3.0 GHz