Comparison of Picocell and DAS Configuration with HSPA Evolution

As demand of mobile data services has grown exponentially, it has increased pressure on mobile operators to enhance capacity in dense urban areas. Usage of internet and services related to mobile network has grown up. UMTS specification has been updated in order to cope with an increased amount of mobile data traffic. These upgrades and releases are based on international standards. HSDPA and HSUPA technologies are previous upgrades of UMTS network but now HSPA Evolution (HSPA+) is the upgraded version for UMTS. HSPA+ improves performance of mobile data transmission in downlink direction. Previously UMTS enabled user data of 384 kbps that was upgraded to 14.4 Mbps in downlink and 5.76 Mbps in uplink data rate by HSPA. But still the demand of data rate is increasing so HSPA+ upgraded UMTS to 21.1 Mbps in downlink and 5.76 Mbps in uplink. Due to these improvements in data rates, HSPA+ has become one of the striking choices for mobile operators. It has been forecasted that amount of data users will increase in future and this will set new challenges for mobile operators. The network is planned in such a way that more capacity is provided to places where more users are present. Most of the network traffic in dense urban area is generated by indoor users. Indoor planning is mostly done with multiple picocells or DAS configuration. The main differences between these two configurations are interference, total capacity, cost of the equipment and implementation. In this Master’s thesis, the main focus is to compare picocells and DAS configuration for HSPA+ by simulations and measurements. Several mobile terminals were used to generate low and high loads for HSPA+ network. These comparisons were made by analyzing the results for signal to interference ratio, total network throughput and several other indicators. The results showed that DAS outperforms picocells in low/high load conditions in terms of SIR, cell throughput and modulation technique. DAS is good choice for medium sized building due to handover free regions and smooth coverage. /Kir1

Packet Loss in Terrestrial Wireless and Hybrid Networks

The presence of both a geostationary satellite link and a terrestrial local wireless link on the same path of a given network connection is becoming increasingly common, thanks to the popularity of the IEEE 802.11 protocol. The most common situation where a hybrid network comes into play is having a Wi-Fi link at the network edge and the satellite link somewhere in the network core. Example of scenarios where this can happen are ships or airplanes where Internet connection on board is provided through a Wi-Fi access point and a satellite link with a geostationary satellite; a small office located in remote or isolated area without cabled Internet access; a rescue team using a mobile ad hoc Wi-Fi network connected to the Internet or to a command centre through a mobile gateway using a satellite link. The serialisation of terrestrial and satellite wireless links is problematic from the point of view of a number of applications, be they based on video streaming, interactive audio or TCP. The reason is the combination of high latency, caused by the geostationary satellite link, and frequent, correlated packet losses caused by the local wireless terrestrial link. In fact, GEO satellites are placed in equatorial orbit at 36,000 km altitude, which takes the radio signal about 250 ms to travel up and down. Satellite systems exhibit low packet loss most of the time, with typical project constraints of 10−8 bit error rate 99% of the time, which translates into a packet error rate of 10−4, except for a few days a year. Wi-Fi links, on the other hand, have quite different characteristics. While the delay introduced by the MAC level is in the order of the milliseconds, and is consequently too small to affect most applications, its packet loss characteristics are generally far from negligible. In fact, multipath fading, interference and collisions affect most environments, causing correlated packet losses: this means that often more than one packet at a time is lost for a single fading even

Characterisation of indoor massive MIMO channels using ray-tracing: A case study in the 3.2-4.0 GHz 5G band

In this paper, research results on the applicability of ray-tracing (RT) techniques to model massive MIMO (MaMi) channels are presented and discussed. The main goal is to show the possibilities that site-specific models based on rigorous RT techniques, along with measurement campaigns considered for verification or calibration purposes where appropriate, can contribute to the development and deployment of 5G systems and beyond using the MaMi technique. For this purpose, starting from the measurements and verification of the simulator in a symmetric, rectangular and accessible scenario used as the testbed, the analysis of a specific case involving channel characterisation in a large, difficult access and measurement scenario was carried out using the simulation tool. Both the measurement system and the simulations emulated the up-link in an indoor cell in the framework of a MaMi-TDD-OFDM system, considering that the base station was equipped with an array consisting of 10 × 10 antennas. The comparison of the simulations with the measurements in the testbed environment allowed us to affirm that the accuracy of the simulator was high, both for determining the parameters of temporal dispersion and frequency selectivity, and for assessing the expected capacity in a specific environment. The subsequent analysis of the target environment showed the high capacities that a MaMi system can achieve in indoor picocells with a relatively high number of simultaneously active users.This work has been supported by the Spanish Ministry of the Economy, Industry and Competitiveness (TEC2017-86779-C2-1-R

Radio frequency channel characterization for energy harvesting in factory environments

This thesis presents ambient energy data obtained from a measurement campaign carried out at an automobile plant. At the automobile plant, ambient light, ambient temperature and ambient radio frequency were measured during the day time over two days. The measurement results showed that ambient light generated the highest DC power. For plant and operation managers at the automobile plant, the measurement data can be used in system design considerations for future energy harvesting wireless sensor nodes at the plant. In addition, wideband measurements obtained from a machine workshop are presented in this thesis. The power delay profile of the wireless channel was obtained by using a frequency domain channel sounding technique. The measurements were compared with an equivalent ray tracing model in order to validate the suitability of the commercial propagation software used in this work. Furthermore, a novel technique for mathematically recreating the time dispersion created by factory inventory in a radio frequency channel is discussed. As a wireless receiver design parameter, delay spread characterizes the amplitude and phase response of the radio channel. In wireless sensor devices, this becomes paramount, as it determines the complexity of the receiver. In reality, it is sometimes difficult to obtain full detail floor plans of factories for deterministic modelling or carry out spot measurements during building construction. As a result, radio provision may be suboptimal. The method presented in this thesis is based on 3-D fractal geometry. By employing the fractal overlaying algorithm presented, metallic objects can be placed on a floor plan so as to obtain similar radio frequency channel effects. The environment created using the fractal approach was used to estimate the amount of energy a harvesting device can accumulate in a University machine workshop space

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Broadband wireless communication systems: Channel modeling and system performance analysis

Wideband channel modeling, which can accurately describe the most important characteristics of wideband mobile fading channels, is essential for the design, evaluation, and optimization of broadband wireless communication systems. In the field of wideband channel modeling, the tradeoff between the prediction accuracy and simulation efficiency has to be taken into account. On one hand, channel models should be as accurate as possible. On the other hand, channel models are supposed to be simple and easy to put into use. There are several commonly used approaches to channel modeling, e.g., measurement-based channel modeling and deterministic channel modeling. Both methods are efficient in capturing the fading behavior of real-world wireless channels. However, the resulting channel models are only valid for the specific environments as those where the measurements were carried out or the ray-tracing scenario was considered. Moreover, these methods are quite time consuming with high computational cost. Alternatively, the geometry-based stochastic channel modeling approach can be employed to model wideband mobile fading channels. The most attractive feature of this method is that the derived channel models are able to predict fading behavior for various propagation environments, and meanwhile they can be easily implemented. Thus, the dissertation will complete the wideband channel modeling task by adopt the geometry-based stochastic approach. In the dissertation, several geometry-based channel models are proposed for both outdoor and indoor propagation scenarios. The significance of the work lies in the fact that it develops channel models under more realistic propagation conditions which have seldom been considered, such as for non-isotropic scattering environxi ments and mobile-to-mobile (M2M) fading channels. In addition, the proposed channel models remove the scarcity that proper geometry-based channel models are missing for indoor environments. The most important statistical properties of the developed channel models including their temporal autocorrelation function (ACF), the two-dimensional (2D) space cross-correlation function (CCF), and the frequency correlation function (FCF) are analyzed. Furthermore, efficient channel simulators with low realization expenditure are obtained. Finally, the validity of the proposed channel models is demonstrated by comparing their analytical channel statistics with the empirical ones measured from real world channels. Besides the work in the field of wideband channel modeling, another part of the dissertation is dedicated to investigate the performance of SISO1 orthogonal frequency division multiplexing (OFDM) broadband communication systems and space-time (ST) coded MIMO2 OFDM broadband communication systems. This work provides a deep insight into the performance of a broadband mobile radio communication system over realistic wideband fading channels. Analytical expressions are derived for bit error probability (BEP) or symbol error rate (SER) of systems. In order to confirm the correctness of the theoretical results as well as to show the usefulness of the wideband channel models in the testing and analysis of a broadband communication system, SISO OFDM systems and space-time coded MIMO OFDM systems are simulated in the dissertation. In order to improve the reliability of digital transmission over broadband wireless radio channels, a differential super-orthogonal space-time trellis code (SOSTTC) is designed for noncoherent communications, where neither the transmitter nor the receiver needs the channel state information (CSI) for decoding. In addition, a new decoding algorithm is proposed. The new algorithm has exactly the same decoding performance as the traditional one. However, it is superior from the standpoint of overall computing complexity