An Probability-Based Energy Model on Cache Coherence Protocol with Mobile Sensor Network

Mobile sensor networks (MSNs) are widely used in various domains to monitor, record, compute, and interact the information within an environment. To prolong the life time of each node in MSNs, energy model and conservation should be considered carefully when designing the data communication mechanism in the network. The limited battery volume and high workload on channels worsen the life times of the busy nodes. In this paper, we propose a new energy evaluating methodology of packet transmissions in MSNs, which is based on redividing network layers and describing the synchronous data flow with matrix form. We first introduce the cache coherence layer to the protocol stack of MSNs. Then, we use a set of energy probability matrices to describe and calculate the energy consumption of each state in the protocol. After that, based on our energy model, we will give out an energy evaluating method of the MSNs design, which is suitable for measuring and comparing the energy consumption from different implements of hardware/software. Our experimental results show that our approach achieves a precision with less than 2% error and provides a credible quantitative criterion for energy optimization of data communication in MSNs

Smart handoff technique for internet of vehicles communication using dynamic edge-backup node

© 2020 The Authors. Published by MDPI. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/electronics9030524A vehicular adhoc network (VANET) recently emerged in the the Internet of Vehicles (IoV); it involves the computational processing of moving vehicles. Nowadays, IoV has turned into an interesting field of research as vehicles can be equipped with processors, sensors, and communication devices. IoV gives rise to handoff, which involves changing the connection points during the online communication session. This presents a major challenge for which many standardized solutions are recommended. Although there are various proposed techniques and methods to support seamless handover procedure in IoV, there are still some open research issues, such as unavoidable packet loss rate and latency. On the other hand, the emerged concept of edge mobile computing has gained crucial attention by researchers that could help in reducing computational complexities and decreasing communication delay. Hence, this paper specifically studies the handoff challenges in cluster based handoff using new concept of dynamic edge-backup node. The outcomes are evaluated and contrasted with the network mobility method, our proposed technique, and other cluster-based technologies. The results show that coherence in communication during the handoff method can be upgraded, enhanced, and improved utilizing the proposed technique.Published onlin

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

Providing efficient services for smartphone applications

Mobile applications are becoming an indispensable part of people\u27s lives, as they allow access to a broad range of services when users are on the go. We present our efforts towards enabling efficient mobile applications in smartphones. Our goal is to improve efficiency of the underlying services, which provide essential functionality to smartphone applications. In particular, we are interested in three fundamental services in smartphones: wireless communication service, power management service, and location reporting service.;For the wireless communication service, we focus on improving spectrum utilization efficiency for cognitive radio communications. We propose ETCH, a set of channel hopping based MAC layer protocols for communication rendezvous in cognitive radio communications. ETCH can fully utilize spectrum diversity in communication rendezvous by allowing all the rendezvous channels to be utilized at the same time.;For the power management service, we improve its efficiency from three different angles. The first angle is to reduce energy consumption of WiFi communications. We propose HoWiES, a system-for WiFi energy saving by utilizing low-power ZigBee radio. The second angle is to reduce energy consumption of web based smartphone applications. We propose CacheKeeper, which is a system-wide web caching service to eliminate unnecessary energy consumption caused by imperfect web caching in many smartphone applications. The third angle is from the perspective of smartphone CPUs. We found that existing CPU power models are ill-suited for modern multicore smartphone CPUs. We present a new approach of CPU power modeling for smartphones. This approach takes CPU idle power states into consideration, and can significantly improve power estimation accuracy and stability for multicore smartphones.;For the location reporting service, we aim to design an efficient location proof solution for mobile location based applications. We propose VProof, a lightweight and privacy-preserving location proof scheme that allows users to construct location proofs by simply extracting unforgeable information from the received packets

JTP, an energy-aware transport protocol for mobile ad hoc networks (PhD thesis)

Wireless ad-hoc networks are based on a cooperative communication model, where all nodes not only generate traffic but also help to route traffic from other nodes to its final destination. In such an environment where there is no infrastructure support the lifetime of the network is tightly coupled with the lifetime of individual nodes. Most of the devices that form such networks are battery-operated, and thus it becomes important to conserve energy so as to maximize the lifetime of a node. In this thesis, we present JTP, a new energy-aware transport protocol, whose goal is to reduce power consumption without compromising delivery requirements of applications. JTP has been implemented within the JAVeLEN system. JAVeLEN [RKM+08], is a new system architecture for ad hoc networks that has been developed to elevate energy efficiency as a first-class optimization metric at all protocol layers, from physical to transport. Thus, energy gains obtained in one layer would not be offset by incompatibilities and/or inefficiencies in other layers. To meet its goal of energy efficiency, JTP (1) contains mechanisms to balance end-toend vs. local retransmissions; (2) minimizes acknowledgment traffic using receiver regulated rate-based flow control combined with selected acknowledgments and in-network caching of packets; and (3) aggressively seeks to avoid any congestion-based packet loss. Within this ultra low-power multi-hop wireless network system, simulations and experimental results demonstrate that our transport protocol meets its goal of preserving the energy efficiency of the underlying network. JTP has been implemented on the actual JAVeLEN nodes and its benefits have been demonstrated on a real system

Effective Dissemination of Presence Information in Highly Partitioned Mobile Ad Hoc Networks

Presence technology enables users of an instant messaging (IM) system to determine if their contacts are online and ready to communicate. In this paper, we propose an effective approach for the proactive dissemination of frequently changing presence information in highly partitioned mobile, wireless networks with IEEE 802.11 technology. Although communication techniques for intermittently connected networks have been extensively studied in the field of delay tolerant networking, the fact that presence information is highly delay sensitive requires a thorough revision of these techniques. To this end, we use discrete-event simulation based on a high-level stochastic model of the IM system to compare different approaches for disseminating presence information in terms of sustained consistency (i.e., fraction of time presence information is in a coherent state) and traffic requirements. Building upon the outcome of the simulation study, we propose the system for presence information exchange by epidemic dissemination (SPEED). Results of a detailed ns-2 simulation study show that SPEED outperforms an approach based on optimized flooding by up to 20% in terms of sustained consistency for low node density and saves up to 48% of control traffic for medium to high node density

JTP, an energy-aware transport protocol for mobile ad hoc networks

Wireless ad-hoc networks are based on a cooperative communication model, where all nodes not only generate traffic but also help to route traffic from other nodes to its final destination. In such an environment where there is no infrastructure support the lifetime of the network is tightly coupled with the lifetime of individual nodes. Most of the devices that form such networks are battery-operated, and thus it becomes important to conserve energy so as to maximize the lifetime of a node. In this thesis, we present JTP, a new energy-aware transport protocol, whose goal is to reduce power consumption without compromising delivery requirements of applications. JTP has been implemented within the JAVeLEN system. JAVeLEN~\cite{javelen08redi}, is a new system architecture for ad hoc networks that has been developed to elevate energy efficiency as a first-class optimization metric at all protocol layers, from physical to transport. Thus, energy gains obtained in one layer would not be offset by incompatibilities and/or inefficiencies in other layers. To meet its goal of energy efficiency, JTP (1) contains mechanisms to balance end-to-end vs. local retransmissions; (2) minimizes acknowledgment traffic using receiver regulated rate-based flow control combined with selected acknowledgments and in-network caching of packets; and (3) aggressively seeks to avoid any congestion-based packet loss. Within this ultra low-power multi-hop wireless network system, simulations and experimental results demonstrate that our transport protocol meets its goal of preserving the energy efficiency of the underlying network. JTP has been implemented on the actual JAVeLEN nodes and its benefits have been demoed on a real system

Wireless cache invalidation schemes with link adaptation and downlink traffic

Providing on-demand data access in client-server wireless networks is an important support to many interesting mobile computing applications. Caching frequently accessed data by mobile clients can conserve wireless bandwidth and battery power, at the expense of some system resources to maintain cache consistency. The basic cache consistency strategy is the use of periodic invalidation reports (IRs) broadcast by the server. Recently, IR-based approaches have been further improved by using additional updated invalidation reports (UIRs) (i.e., the IR+UIR algorithm) to reduce the long query latency. However, the performance of the IR+UIR approach in a practical system is still largely unknown. Specifically, previous results are based on two impractical simplifying assumptions: 1 ) broadcast traffic is error-free and 2) no other downlink traffic (e.g., voice) exists in the system. The first assumption is clearly unrealistic as signal propagation impairments (e.g., multipath fading) and, hence, packet reception failures are inevitable in a practical situation. The second assumption is also inapplicable in real life because mobile devices are usually multipurposed (e.g., a mobile phone equipped with a browser may be used for Web surfing while having a phone conversation). In this paper, we first study the performance of the IR+UIR approach under a realistic system model: The quality of the wireless channel is time-varying, and there are other downlink traffics in the system. Our simulation results show that query delay significantly increases as a result of broadcast error and the additional downlink traffics experience longer delay due to extended broadcast period. Exploiting link adaptation (i.e., transmission rate is adjusted dynamically according to channel quality), we then propose three schemes to tackle these two problems. Our results indicate that the proposed schemes outperform IR+UIR under a wide range of system parameters.published_or_final_versio

Clone Detection for Efficient System in WSN Using AODV

Wireless sensor networks accommodate a whole lot to thousands of sensor nodes and are wide employed in civilian and security applications. One in every of the intense physical attacks faced by the wireless sensor network is node clone attack. So 2 node clone detection protocols area unit introduced via distributed hash table and arbitrarily directed exploration to detect node clones. The previous primarily based on a hash table value that is already distributed and provides key based facilities like checking and caching to observe node clones. The later one is exploitation probabilistic directed forwarding technique and border determination. The simulation results for storage consumption, communication value and detection chance is completed exploitation NS2 and obtained arbitrarily directed exploration is that the best one having low communication value and storage consumption and has smart detection chance