Intelligent systems in manufacturing: current developments and future prospects

Global competition and rapidly changing customer requirements are demanding increasing changes in manufacturing environments. Enterprises are required to constantly redesign their products and continuously reconfigure their manufacturing systems. Traditional approaches to manufacturing systems do not fully satisfy this new situation. Many authors have proposed that artificial intelligence will bring the flexibility and efficiency needed by manufacturing systems. This paper is a review of artificial intelligence techniques used in manufacturing systems. The paper first defines the components of a simplified intelligent manufacturing systems (IMS), the different Artificial Intelligence (AI) techniques to be considered and then shows how these AI techniques are used for the components of IMS

On-line multiobjective automatic control system generation by evolutionary algorithms

Evolutionary algorithms are applied to the on- line generation of servo-motor control systems. In this paper, the evolving population of controllers is evaluated at run-time via hardware in the loop, rather than on a simulated model. Disturbances are also introduced at run-time in order to pro- duce robust performance. Multiobjective optimisation of both PI and Fuzzy Logic controllers is considered. Finally an on-line implementation of Genetic Programming is presented based around the Simulink standard blockset. The on-line designed controllers are shown to be robust to both system noise and ex- ternal disturbances while still demonstrating excellent steady- state and dvnamic characteristics

Fuzzy simulation of forest road surface parameters

The problem of construction of forest roads with the use of local low-strength substandard materials and industrial waste is considered. To solve the problem, the primary task is to develop a method for estimating the parameters of road surfaces taking into account the conditions of uncertainties in the data. This technique allows us to reasonably clarify some of the regulatory parameters and improve the technology of construction of forest roads, which was the goal of the work. To formalize the task, experimental studies were performed and on the basis of these results, the statement of the task of fuzzy derivation of the function for estimating the bearing capacity of the coating was performed. The synthesis of the output function is performed by means of Matlab. © 2019 IOP Publishing Ltd. All rights reserved

Unbalanced load flow with hybrid wavelet transform and support vector machine based Error-Correcting Output Codes for power quality disturbances classification including wind energy

Purpose. The most common methods to designa multiclass classification consist to determine a set of binary classifiers and to combine them. In this paper support vector machine with Error-Correcting Output Codes (ECOC-SVM) classifier is proposed to classify and characterize the power qualitydisturbances such as harmonic distortion,voltage sag, and voltage swell include wind farms generator in power transmission systems. Firstly three phases unbalanced load flow analysis is executed to calculate difference electric network characteristics, levels of voltage, active and reactive power. After, discrete wavelet transform is combined with the probabilistic ECOC-SVM model to construct the classifier. Finally, the ECOC-SVM classifies and identifies the disturbance type according tothe energy deviation of the discrete wavelet transform. The proposedmethod gives satisfactory accuracy with 99.2% compared with well known methods and shows that each power quality disturbances has specific deviations from the pure sinusoidal waveform,this is good at recognizing and specifies the type of disturbance generated from the wind power generator.Наиболее распространенные методы построения мультиклассовой классификации заключаются в определении набора двоичных классификаторов и их объединении. В данной статье предложена машина опорных векторов с классификатором выходных кодов исправления ошибок(ECOC-SVM) с целью классифицировать и характеризовать такие нарушения качества электроэнергии, как гармонические искажения, падение напряжения и скачок напряжения, включая генератор ветровых электростанций в системах передачи электроэнергии. Сначала выполняется анализ потока несимметричной нагрузки трех фаз для расчета разностных характеристик электрической сети, уровней напряжения, активной и реактивной мощности. После этого дискретное вейвлет-преобразование объединяется с вероятностной моделью ECOC-SVM для построения классификатора. Наконец, ECOC-SVM классифицирует и идентифицирует тип возмущения в соответствии с отклонением энергии дискретного вейвлет-преобразования. Предложенный метод дает удовлетворительную точность 99,2% по сравнению с хорошо известными методами и показывает, что каждое нарушение качества электроэнергии имеет определенные отклонения от чисто синусоидальной формы волны, что способствует распознаванию и определению типа возмущения, генерируемого ветровым генератором

Penguasaan kemahiran generik di kalangan graduan hospitaliti di politeknik : satu kajian berkenaan keperluan industri perhotelan, persepsi pensyarah dan pelajar

Kajian yang dijalankan ini bertujuan untuk mengenal pasti kepentingan kemahiran generik mengikut keperluan industri perhotelan di Malaysia dengan persepsi pensyarah dan persepsi pelajar Jabatan Hospitaliti. Oleh kerana matlamat kurikulum pendidikan kini adalah untuk melahirkan graduan yang dapat memenuhi keperluan pihak industri, maka kajian ini dijalankan untuk menilai hubungan di antara keperluan industri perhotelan di Malaysia dengan persepsi pensyarah dan pelajar Jabatan Hospitaliti di Politeknik. Terdapat 13 kemahiran generik yang diperolehi daripada Kementerian Pelajaran dan Latihan Ontario (1997) dijadikan sebagai skop kepada instrumen kajian. Responden kajian terdiri daripada tiga pihak utama iaitu industri perhotelan di Malaysia yang melibatkan 40 buah hotel yang diwakili oleh MAH Chapter dan jawatankuasa dalam Malaysian Associated of Hotel (MAH), pensyarah Unit Hotel dan Katering dan pelajar semester akhir Diploma Hotel dan Katering di Politeknik Johor Bahru, Johor dan Politeknik Merlimau, Melaka. Kajian rintis yang dijalankan menunjukkan nilai Alpha Cronbach pada 0.8781. Data yang diperolehi dianalisis secara deskriptif dan inferensi dengan menggunakan perisian Statistical Package for Social Science (SPSS) versi 11.5. Melalui dapatan kajian, satu senarai berkenaan kemahiran generik yang diperlukan oleh industri perhotelan telah dapat dihasilkan. Selain itu, senarai kemahiran generik menurut persepsi pensyarah dan juga persepsi pelajar turut dihasilkan. Hasil statistik dan graf garis yang diperolehi menunjukkan terdapat perbezaan di antara kemahiran generik yang diperlukan oleh industri perhotelan di Malaysia dengan kemahiran generik menurut persepsi pensyarah dan persepsi pelajar Politeknik. Dapatan analisis menggunakan korelasi Pearson mendapati bahawa tidak terdapat perhubungan yang signifikan di antara kemahiran generik yang diperlukan oleh industri perhotelan dengan persepsi pensyarah dan persepsi pelajar. Namun begitu, terdapat hubungan yang signifikan di antara persepsi pensyarah dengan persepsi pelajar berkenaan dengan amalan kemahiran generik di Politeknik