154 research outputs found
Ring-oscillator with multiple transconductors for linear analog-to-digital conversion
This paper proposes a new circuit-based approach to mitigate nonlinearity in open-loop ring-oscillator-based analog-to-digital converters (ADCs). The approach consists of driving a current-controlled oscillator (CCO) with several transconductors connected in parallel with different bias conditions. The current injected into the oscillator can then be properly sized to linearize the oscillator, performing the inverse current-to-frequency function. To evaluate the approach, a circuit example has been designed in a 65-nm CMOS process, leading to a more than 3-ENOB enhancement in simulation for a high-swing differential input voltage signal of 800-mVpp, with considerable less complex design and lower power and expected area in comparison to state-of-the-art circuit based solutions. The architecture has also been checked against PVT and mismatch variations, proving to be highly robust, requiring only very simple calibration techniques. The solution is especially suitable for high-bandwidth (tens of MHz) medium-resolution applications (10–12 ENOBs), such as 5G or Internet-of-Things (IoT) devices.This research was funded by Project TEC2017-82653-R, Spain
Energy-efficient analog-to-digital conversion for ultra-wideband radio
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.Includes bibliographical references (p. 207-222).In energy constrained signal processing and communication systems, a focus on the analog or digital circuits in isolation cannot achieve the minimum power consumption. Furthermore, in advanced technologies with significant variation, yield is traditionally achieved only through conservative design and a sacrifice of energy efficiency. In this thesis, these limitations are addressed with both a comprehensive mixed-signal design methodology and new circuits and architectures, as presented in the context of an analog-to-digital converter (ADC) for ultra-wideband (UWB) radio. UWB is an emerging technology capable of high-data-rate wireless communication and precise locationing, and it requires high-speed (>500MS/s), low-resolution ADCs. The successive approximation register (SAR) topology exhibits significantly reduced complexity compared to the traditional flash architecture. Three time-interleaved SAR ADCs have been implemented. At the mixed-signal optimum energy point, parallelism and reduced voltage supplies provide more than 3x energy savings. Custom control logic, a new capacitive DAC, and a hierarchical sampling network enable the high-speed operation. Finally, only a small amount of redundancy, with negligible power penalty, dramatically improves the yield of the highly parallel ADC in deep sub-micron CMOS.by Brian P. Ginsburg.Ph.D
Gated pipelined folding ADC based low power sensor for large-scale radiometric partial discharge monitoring
Partial discharge is a well-established metric for condition assessment of high-voltage plant equipment. Traditional techniques for partial discharge detection involve physical connection of sensors to the device under observation, limiting sensors to monitoring of individual apparatus, and therefore, limiting coverage. Wireless measurement provides an attractive low-cost alternative. The measurement of the radiometric signal propagated from a partial discharge source allows for multiple plant items to be observed by a single sensor, without any physical connection to the plant. Moreover, the implementation of a large-scale wireless sensor network for radiometric monitoring facilitates a simple approach to high voltage fault diagnostics. However, accurate measurement typically requires fast data conversion rates to ensure accurate measurement of faults. The use of high-speed conversion requires continuous high-power dissipation, degrading sensor efficiency and increasing cost and complexity. Thus, we propose a radiometric sensor which utilizes a gated, pipelined, sample-and-hold based folding analogue-todigital converter structure that only samples when a signal is received, reducing the power consumption and increasing the efficiency of the sensor. A proof of concept circuit has been developed using discrete components to evaluate the performance and power consumption of the system
Digital Background Self-Calibration Technique for Compensating Transition Offsets in Reference-less Flash ADCs
This Dissertation focusses on proving that background calibration using adaptive algorithms are low-cost, stable and effective methods for obtaining high accuracy in flash A/D converters. An integrated reference-less 3-bit flash ADC circuit has been successfully designed and taped out in UMC 180 nm CMOS technology in order to prove the efficiency of our proposed background calibration. References for ADC transitions have been virtually implemented built-in in the comparators dynamic-latch topology by a controlled mismatch added to each comparator input front-end. An external very simple DAC block (calibration bank) allows control the quantity of mismatch added in each comparator front-end and, therefore, compensate the offset of its effective transition with respect to the nominal value. In order to assist to the estimation of the offset of the prototype comparators, an auxiliary A/D converter with higher resolution and lower conversion speed than the flash ADC is used: a 6-bit capacitive-DAC SAR type. Special care in synchronization of analogue sampling instant in both ADCs has been taken into account.
In this thesis, a criterion to identify the optimum parameters of the flash ADC design with adaptive background calibration has been set. With this criterion, the best choice for dynamic latch architecture, calibration bank resolution and flash ADC resolution are selected.
The performance of the calibration algorithm have been tested, providing great programmability to the digital processor that implements the algorithm, allowing to choose the algorithm limits, accuracy and quantization errors in the arithmetic. Further, systematic controlled offset can be forced in the comparators of the flash ADC in order to have a more exhaustive test of calibration
Data Conversion Within Energy Constrained Environments
Within scientific research, engineering, and consumer electronics, there is a multitude of new discrete sensor-interfaced devices. Maintaining high accuracy in signal quantization while staying within the strict power-budget of these devices is a very challenging problem. Traditional paths to solving this problem include researching more energy-efficient digital topologies as well as digital scaling.;This work offers an alternative path to lower-energy expenditure in the quantization stage --- content-dependent sampling of a signal. Instead of sampling at a constant rate, this work explores techniques which allow sampling based upon features of the signal itself through the use of application-dependent analog processing. This work presents an asynchronous sampling paradigm, based off the use of floating-gate-enabled analog circuitry. The basis of this work is developed through the mathematical models necessary for asynchronous sampling, as well the SPICE-compatible models necessary for simulating floating-gate enabled analog circuitry. These base techniques and circuitry are then extended to systems and applications utilizing novel analog-to-digital converter topologies capable of leveraging the non-constant sampling rates for significant sample and power savings
High-Bandwidth Voltage-Controlled Oscillator based architectures for Analog-to-Digital Conversion
The purpose of this thesis is the proposal and implementation of data conversion
open-loop architectures based on voltage-controlled oscillators (VCOs) built with
ring oscillators (RO-based ADCs), suitable for highly digital designs, scalable to
the newest complementary metal-oxide-semiconductor (CMOS) nodes.
The scaling of the design technologies into the nanometer range imposes the
reduction of the supply voltage towards small and power-efficient architectures,
leading to lower voltage overhead of the transistors. Additionally, phenomena
like a lower intrinsic gain, inherent noise, and parasitic effects (mismatch between
devices and PVT variations) make the design of classic structures for ADCs more
challenging. In recent years, time-encoded A/D conversion has gained relevant
popularity due to the possibility of being implemented with mostly digital structures.
Within this trend, VCOs designed with ring oscillator based topologies
have emerged as promising candidates for the conception of new digitization
techniques.
RO-based data converters show excellent scalability and sensitivity, apart from
some other desirable properties, such as inherent quantization noise shaping and
implicit anti-aliasing filtering. However, their nonlinearity and the limited time
delay achievable in a simple NOT gate drastically limits the resolution of the converter,
especially if we focus on wide-band A/D conversion. This thesis proposes
new ways to alleviate these issues.
Firstly, circuit-based techniques to compensate for the nonlinearity of the ring
oscillator are proposed and compared to equivalent state-of-the-art solutions.
The proposals are designed and simulated in a 65-nm CMOS node for open-loop
RO-based ADC architectures. One of the techniques is also validated experimentally
through a prototype. Secondly, new ways to artificially increase the effective
oscillation frequency are introduced and validated by simulations. Finally, new
approaches to shape the quantization noise and filter the output spectrum of a
RO-based ADC are proposed theoretically. In particular, a quadrature RO-based
band-pass ADC and a power-efficient Nyquist A/D converter are proposed and
validated by simulations.
All the techniques proposed in this work are especially devoted for highbandwidth
applications, such as Internet-of-Things (IoT) nodes or maximally
digital radio receivers. Nevertheless, their field of application is not restricted to
them, and could be extended to others like biomedical instrumentation or sensing.El propósito de esta tesis doctoral es la propuesta y la implementación de arquitecturas
de conversión de datos basadas en osciladores en anillos, compatibles
con diseños mayoritariamente digitales, escalables en los procesos CMOS de fabricación
más modernos donde las estructuras digitales se ven favorecidas.
La miniaturización de las tecnologías CMOS de diseño lleva consigo la reducción
de la tensión de alimentación para el desarrollo de arquitecturas pequeñas
y eficientes en potencia. Esto reduce significativamente la disponibilidad de tensión
para saturar transistores, lo que añadido a una ganancia cada vez menor
de los mismos, ruido y efectos parásitos como el “mismatch” y las variaciones
de proceso, tensión y temperatura han llevado a que sea cada vez más complejo
el diseño de estructuras analógicas eficientes. Durante los últimos años la conversión
A/D basada en codificación temporal ha ganado gran popularidad dado
que permite la implementación de estructuras mayoritariamente digitales. Como
parte de esta evolución, los osciladores controlados por tensión diseñados con topologías
de oscilador en anillo han surgido como un candidato prometedor para
la concepción de nuevas técnicas de digitalización.
Los convertidores de datos basados en osciladores en anillo son extremadamente
sensibles (variación de frecuencia con respecto a la señal de entrada) así como
escalables, además de otras propiedades muy atractivas, como el conformado
espectral de ruido de cuantificación y el filtrado “anti-aliasing”. Sin embargo, su
respuesta no lineal y el limitado tiempo de retraso alcanzable por una compuerta
NOT restringen la resolución del conversor, especialmente para conversión A/D
en aplicaciones de elevado ancho de banda. Esta tesis doctoral propone nuevas
técnicas para aliviar este tipo de problemas.
En primer lugar, se proponen técnicas basadas en circuito para compensar el
efecto de la no linealidad en los osciladores en anillo, y se comparan con soluciones
equivalentes ya publicadas. Las propuestas se diseñan y simulan en tecnología
CMOS de 65 nm para arquitecturas en lazo abierto. Una de estas técnicas
presentadas es también validada experimentalmente a través de un prototipo.
En segundo lugar, se introducen y validan por simulación varias formas de incrementar
artificialmente la frecuencia de oscilación efectiva. Para finalizar, se
proponen teóricamente dos enfoques para configurar nuevas formas de conformación
del ruido de cuantificación y filtrado del espectro de salida de los datos
digitales. En particular, son propuestos y validados por simulación un ADC pasobanda
en cuadratura de fase y un ADC de Nyquist de gran eficiencia en potencia. Todas las técnicas propuestas en este trabajo están destinadas especialmente
para aplicaciones de alto ancho de banda, tales como módulos para el Internet
de las cosas o receptores de radiofrecuencia mayoritariamente digitales. A pesar
de ello, son extrapolables también a otros campos como el de la instrumentación
biomédica o el de la medición de señales mediante sensores.Programa de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de MadridPresidente: Juan Pablo Alegre Pérez.- Secretario: Celia López Ongil.- Vocal: Fernando Cardes Garcí
CMOS Data Converters for Closed-Loop mmWave Transmitters
With the increased amount of data consumed in mobile communication systems, new solutions for the infrastructure are needed. Massive multiple input multiple output (MIMO) is seen as a key enabler for providing this increased capacity. With the use of a large number of transmitters, the cost of each transmitter must be low. Closed-loop transmitters, featuring high-speed data converters is a promising option for achieving this reduced unit cost.In this thesis, both digital-to-analog (D/A) and analog-to-digital (A/D) converters suitable for wideband operation in millimeter wave (mmWave) massive MIMO transmitters are demonstrated. A 2
76 bit radio frequency digital-to-analog converter (RF-DAC)-based in-phase quadrature (IQ) modulator is demonstrated as a compact building block, that to a large extent realizes the transmit path in a closed-loop mmWave transmitter. The evaluation of an successive-approximation register (SAR) analog-to-digital converter (ADC) is also presented in this thesis. Methods for connecting simulated and measured performance has been studied in order to achieve a better understanding about the alternating comparator topology.These contributions show great potential for enabling closed-loop mmWave transmitters for massive MIMO transmitter realizations
- …