Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

New Design Techniques for Dynamic Reconfigurable Architectures

L'abstract è presente nell'allegato / the abstract is in the attachmen

Toward Fault-Tolerant Applications on Reconfigurable Systems-on-Chip

L'abstract è presente nell'allegato / the abstract is in the attachmen

Space programs summary no. 37-45, volume IV FOR the period April 1, 1967 to May 31, 1967. Supporting research and advanced development

Space exploration projects on systems, guidance and control, environmental simulation, space sciences, propulsion, telecommunications, and engineering mechanic

High-performance hardware accelerators for image processing in space applications

Mars is a hard place to reach. While there have been many notable success stories in getting probes to the Red Planet, the historical record is full of bad news. The success rate for actually landing on the Martian surface is even worse, roughly 30%. This low success rate must be mainly credited to the Mars environment characteristics. In the Mars atmosphere strong winds frequently breath. This phenomena usually modifies the lander descending trajectory diverging it from the target one. Moreover, the Mars surface is not the best place where performing a safe land. It is pitched by many and close craters and huge stones, and characterized by huge mountains and hills (e.g., Olympus Mons is 648 km in diameter and 27 km tall). For these reasons a mission failure due to a landing in huge craters, on big stones or on part of the surface characterized by a high slope is highly probable. In the last years, all space agencies have increased their research efforts in order to enhance the success rate of Mars missions. In particular, the two hottest research topics are: the active debris removal and the guided landing on Mars. The former aims at finding new methods to remove space debris exploiting unmanned spacecrafts. These must be able to autonomously: detect a debris, analyses it, in order to extract its characteristics in terms of weight, speed and dimension, and, eventually, rendezvous with it. In order to perform these tasks, the spacecraft must have high vision capabilities. In other words, it must be able to take pictures and process them with very complex image processing algorithms in order to detect, track and analyse the debris. The latter aims at increasing the landing point precision (i.e., landing ellipse) on Mars. Future space-missions will increasingly adopt Video Based Navigation systems to assist the entry, descent and landing (EDL) phase of space modules (e.g., spacecrafts), enhancing the precision of automatic EDL navigation systems. For instance, recent space exploration missions, e.g., Spirity, Oppurtunity, and Curiosity, made use of an EDL procedure aiming at following a fixed and precomputed descending trajectory to reach a precise landing point. This approach guarantees a maximum landing point precision of 20 km. By comparing this data with the Mars environment characteristics, it is possible to understand how the mission failure probability still remains really high. A very challenging problem is to design an autonomous-guided EDL system able to even more reduce the landing ellipse, guaranteeing to avoid the landing in dangerous area of Mars surface (e.g., huge craters or big stones) that could lead to the mission failure. The autonomous behaviour of the system is mandatory since a manual driven approach is not feasible due to the distance between Earth and Mars. Since this distance varies from 56 to 100 million of km approximately due to the orbit eccentricity, even if a signal transmission at the light speed could be possible, in the best case the transmission time would be around 31 minutes, exceeding so the overall duration of the EDL phase. In both applications, algorithms must guarantee self-adaptability to the environmental conditions. Since the Mars (and in general the space) harsh conditions are difficult to be predicted at design time, these algorithms must be able to automatically tune the internal parameters depending on the current conditions. Moreover, real-time performances are another key factor. Since a software implementation of these computational intensive tasks cannot reach the required performances, these algorithms must be accelerated via hardware. For this reasons, this thesis presents my research work done on advanced image processing algorithms for space applications and the associated hardware accelerators. My research activity has been focused on both the algorithm and their hardware implementations. Concerning the first aspect, I mainly focused my research effort to integrate self-adaptability features in the existing algorithms. While concerning the second, I studied and validated a methodology to efficiently develop, verify and validate hardware components aimed at accelerating video-based applications. This approach allowed me to develop and test high performance hardware accelerators that strongly overcome the performances of the actual state-of-the-art implementations. The thesis is organized in four main chapters. Chapter 2 starts with a brief introduction about the story of digital image processing. The main content of this chapter is the description of space missions in which digital image processing has a key role. A major effort has been spent on the missions in which my research activity has a substantial impact. In particular, for these missions, this chapter deeply analizes and evaluates the state-of-the-art approaches and algorithms. Chapter 3 analyzes and compares the two technologies used to implement high performances hardware accelerators, i.e., Application Specific Integrated Circuits (ASICs) and Field Programmable Gate Arrays (FPGAs). Thanks to this information the reader may understand the main reasons behind the decision of space agencies to exploit FPGAs instead of ASICs for high-performance hardware accelerators in space missions, even if FPGAs are more sensible to Single Event Upsets (i.e., transient error induced on hardware component by alpha particles and solar radiation in space). Moreover, this chapter deeply describes the three available space-grade FPGA technologies (i.e., One-time Programmable, Flash-based, and SRAM-based), and the main fault-mitigation techniques against SEUs that are mandatory for employing space-grade FPGAs in actual missions. Chapter 4 describes one of the main contribution of my research work: a library of high-performance hardware accelerators for image processing in space applications. The basic idea behind this library is to offer to designers a set of validated hardware components able to strongly speed up the basic image processing operations commonly used in an image processing chain. In other words, these components can be directly used as elementary building blocks to easily create a complex image processing system, without wasting time in the debug and validation phase. This library groups the proposed hardware accelerators in IP-core families. The components contained in a same family share the same provided functionality and input/output interface. This harmonization in the I/O interface enables to substitute, inside a complex image processing system, components of the same family without requiring modifications to the system communication infrastructure. In addition to the analysis of the internal architecture of the proposed components, another important aspect of this chapter is the methodology used to develop, verify and validate the proposed high performance image processing hardware accelerators. This methodology involves the usage of different programming and hardware description languages in order to support the designer from the algorithm modelling up to the hardware implementation and validation. Chapter 5 presents the proposed complex image processing systems. In particular, it exploits a set of actual case studies, associated with the most recent space agency needs, to show how the hardware accelerator components can be assembled to build a complex image processing system. In addition to the hardware accelerators contained in the library, the described complex system embeds innovative ad-hoc hardware components and software routines able to provide high performance and self-adaptable image processing functionalities. To prove the benefits of the proposed methodology, each case study is concluded with a comparison with the current state-of-the-art implementations, highlighting the benefits in terms of performances and self-adaptability to the environmental conditions

A Survey of Performance Optimization for Mobile Applications

Nowadays there is a mobile application for almost everything a user may think of, ranging from paying bills and gathering information to playing games and watching movies. In order to ensure user satisfaction and success of applications, it is important to provide high performant applications. This is particularly important for resource constraint systems such as mobile devices. Thereby, non-functional performance characteristics, such as energy and memory consumption, play an important role for user satisfaction. This paper provides a comprehensive survey of non-functional performance optimization for Android applications. We collected 155 unique publications, published between 2008 and 2020, that focus on the optimization of non-functional performance of mobile applications. We target our search at four performance characteristics, in particular: responsiveness, launch time, memory and energy consumption. For each performance characteristic, we categorize optimization approaches based on the method used in the corresponding publications. Furthermore, we identify research gaps in the literature for future work

Dependability-driven Strategies to Improve the Design and Verification of Safety-Critical HDL-based Embedded Systems

[ES] La utilización de sistemas empotrados en cada vez más ámbitos de aplicación está llevando a que su diseño deba enfrentarse a mayores requisitos de rendimiento, consumo de energía y área (PPA). Asimismo, su utilización en aplicaciones críticas provoca que deban cumplir con estrictos requisitos de confiabilidad para garantizar su correcto funcionamiento durante períodos prolongados de tiempo. En particular, el uso de dispositivos lógicos programables de tipo FPGA es un gran desafío desde la perspectiva de la confiabilidad, ya que estos dispositivos son muy sensibles a la radiación. Por todo ello, la confiabilidad debe considerarse como uno de los criterios principales para la toma de decisiones a lo largo del todo flujo de diseño, que debe complementarse con diversos procesos que permitan alcanzar estrictos requisitos de confiabilidad. Primero, la evaluación de la robustez del diseño permite identificar sus puntos débiles, guiando así la definición de mecanismos de tolerancia a fallos. Segundo, la eficacia de los mecanismos definidos debe validarse experimentalmente. Tercero, la evaluación comparativa de la confiabilidad permite a los diseñadores seleccionar los componentes prediseñados (IP), las tecnologías de implementación y las herramientas de diseño (EDA) más adecuadas desde la perspectiva de la confiabilidad. Por último, la exploración del espacio de diseño (DSE) permite configurar de manera óptima los componentes y las herramientas seleccionados, mejorando así la confiabilidad y las métricas PPA de la implementación resultante. Todos los procesos anteriormente mencionados se basan en técnicas de inyección de fallos para evaluar la robustez del sistema diseñado. A pesar de que existe una amplia variedad de técnicas de inyección de fallos, varias problemas aún deben abordarse para cubrir las necesidades planteadas en el flujo de diseño. Aquellas soluciones basadas en simulación (SBFI) deben adaptarse a los modelos de nivel de implementación, teniendo en cuenta la arquitectura de los diversos componentes de la tecnología utilizada. Las técnicas de inyección de fallos basadas en FPGAs (FFI) deben abordar problemas relacionados con la granularidad del análisis para poder localizar los puntos débiles del diseño. Otro desafío es la reducción del coste temporal de los experimentos de inyección de fallos. Debido a la alta complejidad de los diseños actuales, el tiempo experimental dedicado a la evaluación de la confiabilidad puede ser excesivo incluso en aquellos escenarios más simples, mientras que puede ser inviable en aquellos procesos relacionados con la evaluación de múltiples configuraciones alternativas del diseño. Por último, estos procesos orientados a la confiabilidad carecen de un soporte instrumental que permita cubrir el flujo de diseño con toda su variedad de lenguajes de descripción de hardware, tecnologías de implementación y herramientas de diseño. Esta tesis aborda los retos anteriormente mencionados con el fin de integrar, de manera eficaz, estos procesos orientados a la confiabilidad en el flujo de diseño. Primeramente, se proponen nuevos métodos de inyección de fallos que permiten una evaluación de la confiabilidad, precisa y detallada, en diferentes niveles del flujo de diseño. Segundo, se definen nuevas técnicas para la aceleración de los experimentos de inyección que mejoran su coste temporal. Tercero, se define dos estrategias DSE que permiten configurar de manera óptima (desde la perspectiva de la confiabilidad) los componentes IP y las herramientas EDA, con un coste experimental mínimo. Cuarto, se propone un kit de herramientas que automatiza e incorpora con eficacia los procesos orientados a la confiabilidad en el flujo de diseño semicustom. Finalmente, se demuestra la utilidad y eficacia de las propuestas mediante un caso de estudio en el que se implementan tres procesadores empotrados en un FPGA de Xilinx serie 7.[CA] La utilització de sistemes encastats en cada vegada més àmbits d'aplicació està portant al fet que el seu disseny haja d'enfrontar-se a majors requisits de rendiment, consum d'energia i àrea (PPA). Així mateix, la seua utilització en aplicacions crítiques provoca que hagen de complir amb estrictes requisits de confiabilitat per a garantir el seu correcte funcionament durant períodes prolongats de temps. En particular, l'ús de dispositius lògics programables de tipus FPGA és un gran desafiament des de la perspectiva de la confiabilitat, ja que aquests dispositius són molt sensibles a la radiació. Per tot això, la confiabilitat ha de considerar-se com un dels criteris principals per a la presa de decisions al llarg del tot flux de disseny, que ha de complementar-se amb diversos processos que permeten aconseguir estrictes requisits de confiabilitat. Primer, l'avaluació de la robustesa del disseny permet identificar els seus punts febles, guiant així la definició de mecanismes de tolerància a fallades. Segon, l'eficàcia dels mecanismes definits ha de validar-se experimentalment. Tercer, l'avaluació comparativa de la confiabilitat permet als dissenyadors seleccionar els components predissenyats (IP), les tecnologies d'implementació i les eines de disseny (EDA) més adequades des de la perspectiva de la confiabilitat. Finalment, l'exploració de l'espai de disseny (DSE) permet configurar de manera òptima els components i les eines seleccionats, millorant així la confiabilitat i les mètriques PPA de la implementació resultant. Tots els processos anteriorment esmentats es basen en tècniques d'injecció de fallades per a poder avaluar la robustesa del sistema dissenyat. A pesar que existeix una àmplia varietat de tècniques d'injecció de fallades, diverses problemes encara han d'abordar-se per a cobrir les necessitats plantejades en el flux de disseny. Aquelles solucions basades en simulació (SBFI) han d'adaptar-se als models de nivell d'implementació, tenint en compte l'arquitectura dels diversos components de la tecnologia utilitzada. Les tècniques d'injecció de fallades basades en FPGAs (FFI) han d'abordar problemes relacionats amb la granularitat de l'anàlisi per a poder localitzar els punts febles del disseny. Un altre desafiament és la reducció del cost temporal dels experiments d'injecció de fallades. A causa de l'alta complexitat dels dissenys actuals, el temps experimental dedicat a l'avaluació de la confiabilitat pot ser excessiu fins i tot en aquells escenaris més simples, mentre que pot ser inviable en aquells processos relacionats amb l'avaluació de múltiples configuracions alternatives del disseny. Finalment, aquests processos orientats a la confiabilitat manquen d'un suport instrumental que permeta cobrir el flux de disseny amb tota la seua varietat de llenguatges de descripció de maquinari, tecnologies d'implementació i eines de disseny. Aquesta tesi aborda els reptes anteriorment esmentats amb la finalitat d'integrar, de manera eficaç, aquests processos orientats a la confiabilitat en el flux de disseny. Primerament, es proposen nous mètodes d'injecció de fallades que permeten una avaluació de la confiabilitat, precisa i detallada, en diferents nivells del flux de disseny. Segon, es defineixen noves tècniques per a l'acceleració dels experiments d'injecció que milloren el seu cost temporal. Tercer, es defineix dues estratègies DSE que permeten configurar de manera òptima (des de la perspectiva de la confiabilitat) els components IP i les eines EDA, amb un cost experimental mínim. Quart, es proposa un kit d'eines (DAVOS) que automatitza i incorpora amb eficàcia els processos orientats a la confiabilitat en el flux de disseny semicustom. Finalment, es demostra la utilitat i eficàcia de les propostes mitjançant un cas d'estudi en el qual s'implementen tres processadors encastats en un FPGA de Xilinx serie 7.[EN] Embedded systems are steadily extending their application areas, dealing with increasing requirements in performance, power consumption, and area (PPA). Whenever embedded systems are used in safety-critical applications, they must also meet rigorous dependability requirements to guarantee their correct operation during an extended period of time. Meeting these requirements is especially challenging for those systems that are based on Field Programmable Gate Arrays (FPGAs), since they are very susceptible to Single Event Upsets. This leads to increased dependability threats, especially in harsh environments. In such a way, dependability should be considered as one of the primary criteria for decision making throughout the whole design flow, which should be complemented by several dependability-driven processes. First, dependability assessment quantifies the robustness of hardware designs against faults and identifies their weak points. Second, dependability-driven verification ensures the correctness and efficiency of fault mitigation mechanisms. Third, dependability benchmarking allows designers to select (from a dependability perspective) the most suitable IP cores, implementation technologies, and electronic design automation (EDA) tools. Finally, dependability-aware design space exploration (DSE) allows to optimally configure the selected IP cores and EDA tools to improve as much as possible the dependability and PPA features of resulting implementations. The aforementioned processes rely on fault injection testing to quantify the robustness of the designed systems. Despite nowadays there exists a wide variety of fault injection solutions, several important problems still should be addressed to better cover the needs of a dependability-driven design flow. In particular, simulation-based fault injection (SBFI) should be adapted to implementation-level HDL models to take into account the architecture of diverse logic primitives, while keeping the injection procedures generic and low-intrusive. Likewise, the granularity of FPGA-based fault injection (FFI) should be refined to the enable accurate identification of weak points in FPGA-based designs. Another important challenge, that dependability-driven processes face in practice, is the reduction of SBFI and FFI experimental effort. The high complexity of modern designs raises the experimental effort beyond the available time budgets, even in simple dependability assessment scenarios, and it becomes prohibitive in presence of alternative design configurations. Finally, dependability-driven processes lack an instrumental support covering the semicustom design flow in all its variety of description languages, implementation technologies, and EDA tools. Existing fault injection tools only partially cover the individual stages of the design flow, being usually specific to a particular design representation level and implementation technology. This work addresses the aforementioned challenges by efficiently integrating dependability-driven processes into the design flow. First, it proposes new SBFI and FFI approaches that enable an accurate and detailed dependability assessment at different levels of the design flow. Second, it improves the performance of dependability-driven processes by defining new techniques for accelerating SBFI and FFI experiments. Third, it defines two DSE strategies that enable the optimal dependability-aware tuning of IP cores and EDA tools, while reducing as much as possible the robustness evaluation effort. Fourth, it proposes a new toolkit (DAVOS) that automates and seamlessly integrates the aforementioned dependability-driven processes into the semicustom design flow. Finally, it illustrates the usefulness and efficiency of these proposals through a case study consisting of three soft-core embedded processors implemented on a Xilinx 7-series SoC FPGA.Tuzov, I. (2020). Dependability-driven Strategies to Improve the Design and Verification of Safety-Critical HDL-based Embedded Systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/159883TESI

NASA Tech Briefs, September 2009

opics covered include: Filtering Water by Use of Ultrasonically Vibrated Nanotubes; Computer Code for Nanostructure Simulation; Functionalizing CNTs for Making Epoxy/CNT Composites; Improvements in Production of Single-Walled Carbon Nanotubes; Progress Toward Sequestering Carbon Nanotubes in PmPV; Two-Stage Variable Sample-Rate Conversion System; Estimating Transmitted-Signal Phase Variations for Uplink Array Antennas; Board Saver for Use with Developmental FPGAs; Circuit for Driving Piezoelectric Transducers; Digital Synchronizer without Metastability; Compact, Low-Overhead, MIL-STD-1553B Controller; Parallel-Processing CMOS Circuitry for M-QAM and 8PSK TCM; Differential InP HEMT MMIC Amplifiers Embedded in Waveguides; Improved Aerogel Vacuum Thermal Insulation; Fluoroester Co-Solvents for Low-Temperature Li+ Cells; Using Volcanic Ash to Remove Dissolved Uranium and Lead; High-Efficiency Artificial Photosynthesis Using a Novel Alkaline Membrane Cell; Silicon Wafer-Scale Substrate for Microshutters and Detector Arrays; Micro-Horn Arrays for Ultrasonic Impedance Matching; Improved Controller for a Three-Axis Piezoelectric Stage; Nano-Pervaporation Membrane with Heat Exchanger Generates Medical-Grade Water; Micro-Organ Devices; Nonlinear Thermal Compensators for WGM Resonators; Dynamic Self-Locking of an OEO Containing a VCSEL; Internal Water Vapor Photoacoustic Calibration; Mid-Infrared Reflectance Imaging of Thermal-Barrier Coatings; Improving the Visible and Infrared Contrast Ratio of Microshutter Arrays; Improved Scanners for Microscopic Hyperspectral Imaging; Rate-Compatible LDPC Codes with Linear Minimum Distance; PrimeSupplier Cross-Program Impact Analysis and Supplier Stability Indicator Simulation Model; Integrated Planning for Telepresence With Time Delays; Minimizing Input-to-Output Latency in Virtual Environment; Battery Cell Voltage Sensing and Balancing Using Addressable Transformers; Gaussian and Lognormal Models of Hurricane Gust Factors; Simulation of Attitude and Trajectory Dynamics and Control of Multiple Spacecraft; Integrated Modeling of Spacecraft Touch-and-Go Sampling; Spacecraft Station-Keeping Trajectory and Mission Design Tools; Efficient Model-Based Diagnosis Engine; and DSN Simulator

Harnessing noise to enhance robustness vs. efficiency trade-off in machine learning

While deep nets have achieved human-comparable accuracy in various classification tasks, they fall short significantly in terms of the robustness and cost metrics. For example, tiny engineered corruptions in deep net inputs can reduce their accuracy to zero. Furthermore, deep nets also require millions of trainable parameters, resulting in significant training and inference costs. These robustness and cost challenges are well recognized today. In response, there have been a plethora of works focusing on improving either the accuracy vs. robustness trade-off, or the accuracy vs. cost trade-off. However, simultaneous consideration of accuracy, robustness, and cost metrics is largely absent today, in part, because far fewer works have explored the robustness vs. cost trade-off. This dissertation aims to fill this gap by focusing explicitly on the robustness vs. cost trade-off in the presence of data noise, as well as hardware noise. Specifically, we explore how to harness the noise in order to enhance this trade-off. We characterize and improve robustness vs. cost trade-offs across diverse problem settings, ranging from beyond-CMOS hardware implementations of machine learning (ML) classifiers to efficient training of deep nets that are robust to multiple types of corruptions in their inputs. This dissertation can be roughly divided into two part, one focusing on hardware noise and the other on data noise. In the first part, we start by focusing on harnessing noise in spintronic hardware implementations, where the logic gates become error prone when operated at lower switching energy/delay. We propose techniques to shape the resulting hardware noise distribution and to efficiently compensate it at the system-level output. As a result, we observe 1000x improvement intolerance to gate-level switching error rates, while keeping the area/energy overhead of compensation circuits to as low as 15%. These robustness enhancements further enable 3× reduction in iso-throughput energy consumption of a binary ML classifier employed for EEG-based seizure detection. Building on this work, we propose spintronic channel networks, exponential decay of spin current to efficiently realize multi-bit dot product computation. We employ error-prone nanomagnets as efficient stochastic slicers biased by spin currents proportional to the likelihood of the classification decision. We achieve 112x-to-22.5x and 14x-to-2.5x higher energy-efficiency over conventional spin-based and 20 nm CMOS designs, respectively, when realizing 10-to-100-dimensional binary classifiers. Furthermore, we also consider the impact of hardware noise originated from process variations and readout circuits in in-memory computing implementations employing non-volatile resistive crossbar arrays. Based on our analysis, we identify design configurations achieving the highest signal-to-noise ratio (SNR), and further estimate how such robustness trades off with the array energy consumption. In the second part, we switch gears to improve the robustness vs. cost trade-off for deep nets in the presence of data noise. Specifically, we focus on the impact of adversarial perturbations in the deep nets inputs. We propose and validate the hypotheses about orientations of dominant subspaces of adversarial perturbations. We demonstrate how changes in the curvature of decision boundary of the deep nets affects the orientations of the adversarial perturbations. Based on these insights we demonstrate how shaped noise can be introduced as a feature to enhance robustness vs. cost trade-off in deep nets. Specifically, we propose shaped noise augmented processing (SNAP), a method to efficiently train deep nets that are robust to multiple types of adversarial perturbations, simultaneously. SNAP prepends a deep net with a shaped noise augmentation layer whose distribution is learned along with the network parameters using any established robust training framework. Based on extensive comparisons with nine state-of-the-art (SOTA) robust training frameworks, we show that SNAP achieves the best robustness vs. training cost trade-off. In particular, it enables 4x reduction in the training cost compared to the SOTA approach published just this last year. Furthermore, thanks to the computational simplicity of SNAP, it is the first technique of its kind that is scalable to large datasets, such as ImageNet