UWB Signal Generation and Modulation Based on Photonic Approaches

Demands for efficient and reliable wireless communications between computers, mobile phones, and other portable electronic devices in short distances are increasing very fast. Ultra-wideband impulse radio is one of the promising techniques, which has gained much research interests in recent years. It covers a wide scope of applications in short-reach wireless communications. Conventionally, the low-bandwidth electronics can process the UWB signals very well. More recently, microwave photonics has enabled a new paradigm for developing UWB techniques in photonic domain. The photonic approaches offer much higher bandwidth and seamless compatibility with optical fiber networks, which allow for scaling the UWB technology to more advanced application scenarios. This chapter is included because photonic approaches have become a unique and effective technique in microwave signal processing. We do not attempt to offer a comprehensive review of UWB photonics, but rather to introduce the typical photonic solutions for UWB signal generation, modulation, transmission, down conversion, and so on

Ultra Wideband Wearable Sensors for Motion Tracking Applications

The increasing interest and advancements in wearable electronics, biomedical applications and digital signal processing techniques have led to the unceasing progress and research in novel implementations of wireless communications technology. Human motion tracking and localisation are some of the numerous promising applications that have emerged from this interest. Ultra-wideband (UWB) technology is particularly seen as a very attractive solution for microwave-based localisation due to the fine time resolution capabilities of the UWB pulses. However, to prove the viability of utilizing UWB technology for high precision localisation applications, a considerable amount of research work is still needed. The impact of the presence of the human body on localisation accuracy needs to be investigated. In addition, for guaranteeing accurate data retrieval in an impulse-radio based system, the study of pulse distortion becomes indispensable. The objective of the research work presented in this thesis is to study and carry out experimental investigations to formulate new techniques for the development of an Impulse-radio UWB sensor based localisation system for human motion tracking applications. This research work initiates a new approach for human motion tracking by making use of pulsed UWB technology which will allow the development of advanced tracking solutions with the capacity to meet the needs of professional users. Extensive experimental studies involving several ranging and three dimensional localisation investigations have been undertaken, and the potential of achieving high precision localisation using ultra-wideband technology has been demonstrated. Making use of the upper portion of the UWB band, a novel miniature antenna designed for integration in the UWB localisation system is presented and its performance has been examined. The key findings and contributions of this research work include UWB antenna characterisation for pulse based transmission, evaluation of comprehensive antenna fidelity patterns, impact of pulse fidelity on the communication performance of a UWB radio system, along with studies regarding the effect of the human body on received pulse quality and localisation accuracy. In addition, an innovative approach of making use of antenna phase centre information for improving the localisation accuracy has been presented

Ultra-Low-Power Uwb Impulse Radio Design: Architecture, Circuits, And Applications

Recent advances in home healthcare, environmental sensing, and low power computing have created a need for wireless communication at very low power for low data rate applications. Due to higher energy/bit requirements at lower data -rate, achieving power levels low enough to enable long battery lifetime (~10 years) or power-harvesting supplies have not been possible with traditional approaches. Dutycycled radios have often been proposed in literature as a solution for such applications due to their ability to shut off the static power consumption at low data rates. While earlier radio nodes for such systems have been proposed based on a type of sleepwake scheduling, such implementations are still power hungry due to large synchronization uncertainty (~1[MICRO SIGN]s). In this dissertation, we utilize impulsive signaling and a pulse-coupled oscillator (PCO) based synchronization scheme to facilitate a globally synchronized wireless network. We have modeled this network over a widely varying parameter space and found that it is capable of reducing system cost as well as providing scalability in wireless sensor networks. Based on this scheme, we implemented an FCC compliant, 3-5GHz, timemultiplexed, dual-band UWB impulse radio transceiver, measured to consume only 20[MICRO SIGN]W when the nodes are synchronized for peer-peer communication. At the system level the design was measured to consume 86[MICRO SIGN]W of power, while facilitating multi- hop communication. Simple pulse-shaping circuitry ensures spectral efficiency, FCC compliance and ~30dB band-isolation. Similarly, the band-switchable, ~2ns turn-on receiver implements a non-coherent pulse detection scheme that facilitates low power consumption with -87dBm sensitivity at 100Kbps. Once synchronized the nodes exchange information while duty-cycling, and can use any type of high level network protocols utilized in packet based communication. For robust network performance, a localized synchronization detection scheme based on relative timing and statistics of the PCO firing and the timing pulses ("sync") is reported. No active hand-shaking is required for nodes to detect synchronization. A self-reinforcement scheme also helps maintain synchronization even in the presence of miss-detections. Finally we discuss unique ways to exploit properties of pulse coupled oscillator networks to realize novel low power event communication, prioritization, localization and immediate neighborhood validation for low power wireless sensor applications

Compact and Efficient Millimetre-Wave Circuits for Wideband Applications

Radio systems, along with the ever increasing processing power provided by computer technology, have altered many aspects of our society over the last century. Various gadgets and integrated electronics are found everywhere nowadays; many of these were science-fiction only a few decades ago. Most apparent is perhaps your ``smart phone'', possibly kept within arm's reach wherever you go, that provides various services, news updates, and social networking via wireless communications systems. The frameworks of the fifth generation wireless system is currently being developed worldwide. Inclusion of millimetre-wave technology promise high-speed piconets, wireless back-haul on pencil-beam links, and further functionality such as high-resolution radar imaging. This thesis addresses the challenge to provide signals at carrier frequencies in the millimetre-wave spectrum, and compact integrated transmitter front-ends of sub-wavelength dimensions. A radio frequency pulse generator, i.e. a ``wavelet genarator'', circuit is implemented using diodes and transistors in III--V compound semiconductor technology. This simple but energy-efficient front-end circuit can be controlled on the time-scale of picoseconds. Transmission of wireless data is thereby achieved at high symbol-rates and low power consumption per bit. A compact antenna is integrated with the transmitter circuit, without any intermediate transmission line. The result is a physically small, single-chip, transmitter front-end that can output high equivalent isotropically radiated power. This element radiation characteristic is wide-beam and suitable for array implementations

The Design of Low Power Ultra-Wideband Transceiver

Ph.DDOCTOR OF PHILOSOPH