Low-cost, low-power FPGA implementation of ED25519 and CURVE25519 point multiplication

Twisted Edwards curves have been at the center of attention since their introduction by Bernstein et al. in 2007. The curve ED25519, used for Edwards-curve Digital Signature Algorithm (EdDSA), provides faster digital signatures than existing schemes without sacrificing security. The CURVE25519 is a Montgomery curve that is closely related to ED25519. It provides a simple, constant time, and fast point multiplication, which is used by the key exchange protocol X25519. Software implementations of EdDSA and X25519 are used in many web-based PC and Mobile applications. In this paper, we introduce a low-power, low-area FPGA implementation of the ED25519 and CURVE25519 scalar multiplication that is particularly relevant for Internet of Things (IoT) applications. The efficiency of the arithmetic modulo the prime number 2 255 − 19, in particular the modular reduction and modular multiplication, are key to the efficiency of both EdDSA and X25519. To reduce the complexity of the hardware implementation, we propose a high-radix interleaved modular multiplication algorithm. One benefit of this architecture is to avoid the use of large-integer multipliers relying on FPGA DSP modules

Fast implementation of Curve25519 using AVX2

AVX2 is the newest instruction set on the Intel Haswell processor that provides simultaneous execution of operations over vectors of 256 bits. This work presents the advances on the applicability of AVX2 on the development of an efficient software implementation of the elliptic curve Diffie-Hellman protocol using the Curve25519 elliptic curve. Also, we will discuss some advantages that vector instructions offer as an alternative method to accelerate prime field and elliptic curve arithmetic. The performance of our implementation shows a slight improvement against the fastest state-of-the-art implementations.AVX2 is the newest instruction set on the Intel Haswell processor that provides simultaneous execution of operations over vectors of 256 bits. This work presents the advances on the applicability of AVX2 on the development of an efficient software impleme9230329345FAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOSEM INFOMAÇÃO4th International Conference on Cryptology and Information Security in Latin AmericaThe authors would like to thank the anonymous reviewers for their helpful suggestions and comments. Additionally, they would like to show their gratitude to J´er´emie Detrey for his valuable comments on an earlier version of the manuscrip

Fast, Small, and Area-Time Efficient Architectures for Key-Exchange on Curve25519

Abstract--- This paper demonstrates fast and compact implementations of Elliptic Curve Cryptography (ECC) for efficient key agreement over Curve25519. Curve25519 has been recently adopted as a key exchange method for several applications such as connected small devices as well as cloud, and included in the National Institute of Standards and Technology (NIST) recommendations for public key cryptography. This paper presents three different performance level designs including lightweight, area-time efficient, and high-performance architectures. Lightweight hardware implementations are used for several Internet of Things (IoT) applications due to their resources being at premium. Our lightweight architecture utilizes 90% less resources compared to the best previous work while it is still more optimized in term of A\cdot T (area\timestime). For efficient implementation from either time or utilized resources, our area-time efficient architecture can establish almost 7,000 key sessions per second which is 64% faster than the previous works. The area-time efficient architecture uses well scheduled interleaved multiplication combined with a reduction algorithm. Additionally, we offer a fast architecture for high performance applications based on the 4-level Karatsuba method and Carry-Compact Addition (CCA). Our high-performance architecture also outperforms previous work in terms of A\cdot T. The results show 9% and 29% improvement in A\cdot T and A_{d}\cdot T (DSP_count\timestime), respectively. All architectures are variable-base-point implemented on the Xilinx Zynq-7020 FPGA family where performance and implementation metrics are reported and compared. Finally, various side-channel attack countermeasures are embedded in the proposed architectures

Generalised Mersenne Numbers Revisited

Generalised Mersenne Numbers (GMNs) were defined by Solinas in 1999 and feature in the NIST (FIPS 186-2) and SECG standards for use in elliptic curve cryptography. Their form is such that modular reduction is extremely efficient, thus making them an attractive choice for modular multiplication implementation. However, the issue of residue multiplication efficiency seems to have been overlooked. Asymptotically, using a cyclic rather than a linear convolution, residue multiplication modulo a Mersenne number is twice as fast as integer multiplication; this property does not hold for prime GMNs, unless they are of Mersenne's form. In this work we exploit an alternative generalisation of Mersenne numbers for which an analogue of the above property --- and hence the same efficiency ratio --- holds, even at bitlengths for which schoolbook multiplication is optimal, while also maintaining very efficient reduction. Moreover, our proposed primes are abundant at any bitlength, whereas GMNs are extremely rare. Our multiplication and reduction algorithms can also be easily parallelised, making our arithmetic particularly suitable for hardware implementation. Furthermore, the field representation we propose also naturally protects against side-channel attacks, including timing attacks, simple power analysis and differential power analysis, which is essential in many cryptographic scenarios, in constrast to GMNs.Comment: 32 pages. Accepted to Mathematics of Computatio

Time-Efficient Finite Field Microarchitecture Design for Curve448 and Ed448 on Cortex-M4

The elliptic curve family of schemes has the lowest computational latency, memory use, energy consumption, and bandwidth requirements, making it the most preferred public key method for adoption into network protocols. Being suitable for embedded devices and applicable for key exchange and authentication, ECC is assuming a prominent position in the field of IoT cryptography. The attractive properties of the relatively new curve Curve448 contribute to its inclusion in the TLS1.3 protocol and pique the interest of academics and engineers aiming at studying and optimizing the schemes. When addressing low-end IoT devices, however, the literature indicates little work on these curves. In this paper, we present an efficient design for both protocols based on Montgomery curve Curve448 and its birationally equivalent Edwards curve Ed448 used for key agreement and digital signature algorithm, specifically the X448 function and the Ed448 DSA, relying on efficient low-level arithmetic operations targeting the ARM-based Cortex-M4 platform. Our design performs point multiplication, the base of the Elliptic Curve Diffie-Hellman (ECDH), in 3,2KCCs, resulting in more than 48% improvement compared to the best previous work based on Curve448, and performs sign and verify, the main operations of the Edwards-curves Digital Signature Algorithm (EdDSA), in 6,038KCCs and 7,404KCCs, showing a speedup of around 11% compared to the counterparts. We present novel modular multiplication and squaring architectures reaching ~25% and ~35% faster runtime than the previous best-reported results, respectively, based on Curve448 key exchange counterparts, and ~13% and ~25% better latency results than the Ed448-based digital signature counterparts targeting Cortex-M4 platform

Elliptic Curve Cryptography on Modern Processor Architectures

Abstract Elliptic Curve Cryptography (ECC) has been adopted by the US National Security Agency (NSA) in Suite "B" as part of its "Cryptographic Modernisation Program ". Additionally, it has been favoured by an entire host of mobile devices due to its superior performance characteristics. ECC is also the building block on which the exciting field of pairing/identity based cryptography is based. This widespread use means that there is potentially a lot to be gained by researching efficient implementations on modern processors such as IBM's Cell Broadband Engine and Philip's next generation smart card cores. ECC operations can be thought of as a pyramid of building blocks, from instructions on a core, modular operations on a finite field, point addition & doubling, elliptic curve scalar multiplication to application level protocols. In this thesis we examine an implementation of these components for ECC focusing on a range of optimising techniques for the Cell's SPU and the MIPS smart card. We show significant performance improvements that can be achieved through of adoption of EC

HLS-Based Methodology for Fast Iterative Development Applied to Elliptic Curve Arithmetic

International audienceHigh-Level Synthesis (HLS) is used by hardware developers to achieve higher abstraction in circuit descriptions. In order to shorten the hardware development time via HLS, we present an adjustment of the Iterative and Incremental Design (IID) methodology, frequently used in software development. In particular, our methodology is relevant for the development of applications with unusual complexity: the method was applied here to the development of large modular arithmetic, commonly used for cryptography applications (e.g., Elliptic Curves). Rapid feedback on circuit characteristics is used to evaluate deep architectural changes in short time, greatly reducing the time-to-market with respect to hand-made designs. In addition, our approach is highly flexible, since the same generic high-level description can be used to produce an entire set of circuits, each with different area/performance trade-offs. Thanks to the proposed approach, any change to the initial specification (e.g., the curve used) is also very fast, while it may require a large effort in the case of hand-made designs

FourQ on FPGA: New Hardware Speed Records for Elliptic Curve Cryptography over Large Prime Characteristic Fields

We present fast and compact implementations of FourQ (ASIACRYPT 2015) on field-programmable gate arrays (FPGAs), and demonstrate, for the first time, the high efficiency of this new elliptic curve on reconfigurable hardware. By adapting FourQ\u27s algorithms to hardware, we design FPGA-tailored architectures that are significantly faster than any other ECC alternative over large prime characteristic fields. For example, we show that our single-core and multi-core implementations can compute at a rate of 6389 and 64730 scalar multiplications per second, respectively, on a Xilinx Zynq-7020 FPGA, which represent factor-2.5 and 2 speedups in comparison with the corresponding variants of the fastest Curve25519 implementation on the same device. These results show the potential of deploying FourQ on hardware for high-performance and embedded security applications. All the presented implementations exhibit regular, constant-time execution, protecting against timing and simple side-channel attacks