Improving latency tolerance of multithreading through decoupling

The increasing hardware complexity of dynamically scheduled superscalar processors may compromise the scalability of this organization to make an efficient use of future increases in transistor budget. SMT processors, designed over a superscalar core, are therefore directly concerned by this problem. The article presents and evaluates a novel processor microarchitecture which combines two paradigms: simultaneous multithreading and access/execute decoupling. Since its decoupled units issue instructions in order, this architecture is significantly less complex, in terms of critical path delays, than a centralized out-of-order design, and it is more effective for future growth in issue-width and clock speed. We investigate how both techniques complement each other. Since decoupling features an excellent memory latency hiding efficiency, the large amount of parallelism exploited by multithreading may be used to hide the latency of functional units and keep them fully utilized. The study shows that, by adding decoupling to a multithreaded architecture, fewer threads are needed to achieve maximum throughput. Therefore, in addition to the obvious hardware complexity reduction, it places lower demands on the memory system. The study also reveals that multithreading by itself exhibits little memory latency tolerance. Results suggest that most of the latency hiding effectiveness of SMT architectures comes from the dynamic scheduling. On the other hand, decoupling is very effective at hiding memory latency. An increase in the cache miss penalty from 1 to 32 cycles reduces the performance of a 4-context multithreaded decoupled processor by less than 2 percent. For the nondecoupled multithreaded processor, the loss of performance is about 23 percent.Peer ReviewedPostprint (published version

Kilo-instruction processors: overcoming the memory wall

Historically, advances in integrated circuit technology have driven improvements in processor microarchitecture and led to todays microprocessors with sophisticated pipelines operating at very high clock frequencies. However, performance improvements achievable by high-frequency microprocessors have become seriously limited by main-memory access latencies because main-memory speeds have improved at a much slower pace than microprocessor speeds. Its crucial to deal with this performance disparity, commonly known as the memory wall, to enable future high-frequency microprocessors to achieve their performance potential. To overcome the memory wall, we propose kilo-instruction processors-superscalar processors that can maintain a thousand or more simultaneous in-flight instructions. Doing so means designing key hardware structures so that the processor can satisfy the high resource requirements without significantly decreasing processor efficiency or increasing energy consumption.Peer ReviewedPostprint (published version

Late allocation and early release of physical registers

The register file is one of the critical components of current processors in terms of access time and power consumption. Among other things, the potential to exploit instruction-level parallelism is closely related to the size and number of ports of the register file. In conventional register renaming schemes, both register allocation and releasing are conservatively done, the former at the rename stage, before registers are loaded with values, and the latter at the commit stage of the instruction redefining the same register, once registers are not used any more. We introduce VP-LAER, a renaming scheme that allocates registers later and releases them earlier than conventional schemes. Specifically, physical registers are allocated at the end of the execution stage and released as soon as the processor realizes that there will be no further use of them. VP-LAER enhances register utilization, that is, the fraction of allocated registers having a value to be read in the future. Detailed cycle-level simulations show either a significant speedup for a given register file size or a reduction in the register file size for a given performance level, especially for floating-point codes, where the register file pressure is usually high.Peer ReviewedPostprint (published version

Instruction fetch architectures and code layout optimizations

The design of higher performance processors has been following two major trends: increasing the pipeline depth to allow faster clock rates, and widening the pipeline to allow parallel execution of more instructions. Designing a higher performance processor implies balancing all the pipeline stages to ensure that overall performance is not dominated by any of them. This means that a faster execution engine also requires a faster fetch engine, to ensure that it is possible to read and decode enough instructions to keep the pipeline full and the functional units busy. This paper explores the challenges faced by the instruction fetch stage for a variety of processor designs, from early pipelined processors, to the more aggressive wide issue superscalars. We describe the different fetch engines proposed in the literature, the performance issues involved, and some of the proposed improvements. We also show how compiler techniques that optimize the layout of the code in memory can be used to improve the fetch performance of the different engines described Overall, we show how instruction fetch has evolved from fetching one instruction every few cycles, to fetching one instruction per cycle, to fetching a full basic block per cycle, to several basic blocks per cycle: the evolution of the mechanism surrounding the instruction cache, and the different compiler optimizations used to better employ these mechanisms.Peer ReviewedPostprint (published version

Low-complexity distributed issue queue

As technology evolves, power density significantly increases and cooling systems become more complex and expensive. The issue logic is one of the processor hotspots and, at the same time, its latency is crucial for the processor performance. We present a low-complexity FP issue logic (MB/spl I.bar/distr) that achieves high performance with small energy requirements. The MB/spl I.bar/distr scheme is based on classifying instructions and dispatching them into a set of queues depending on their data dependences. These instructions are selected for issuing based on an estimation of when their operands will be available, so the conventional wakeup activity is not required. Additionally, the functional units are distributed across the different queues. The energy required by the proposed scheme is substantially lower than that required by a conventional issue design, even if the latter has the ability of waking-up only unready operands. MB/spl I.bar/distr scheme reduces the energy-delay product by 35% and the energy-delay product by 18% with respect to a state-of-the-art approach.Peer ReviewedPostprint (published version

Inherently workload-balanced clustered microarchitecture

The performance of clustered microarchitectures relies on steering schemes that try to find the best trade-off between workload balance and inter-cluster communication penalties. In previously proposed clustered processors, reducing communication penalties and balancing the workload are opposite targets, since improving one usually implies a detriment in the other. In this paper we propose a new clustered microarchitecture that can minimize communication penalties without compromising workload balance. The key idea is to arrange the clusters in a ring topology in such a way that results of one cluster can be forwarded to the neighbor cluster with a very short latency. In this way, minimizing communication penalties is favored when the producer of a value and its consumer are placed in adjacent clusters, which also favors workload balance. The proposed microarchitecture is shown to outperform a state-of-the-art clustered processor. For instance, for an 8-cluster configuration and just one fully pipelined unidirectional bus, 15% speedup is achieved on average for FP programs.Peer ReviewedPostprint (published version

Quantifying the benefits of SPECint distant parallelism in simultaneous multithreading architectures

We exploit the existence of distant parallelism that future compilers could detect and characterise its performance under simultaneous multithreading architectures. By distant parallelism we mean parallelism that cannot be captured by the processor instruction window and that can produce threads suitable for parallel execution in a multithreaded processor. We show that distant parallelism can make feasible wider issue processors by providing more instructions from the distant threads, thus better exploiting the resources from the processor in the case of speeding up single integer applications. We also investigate the necessity of out-of-order processors in the presence of multiple threads of the same program. It is important to notice at this point that the benefits described are totally orthogonal to any other architectural techniques targeting a single thread.Peer ReviewedPostprint (published version

Hardware schemes for early register release

Register files are becoming one of the critical components of current out-of-order processors in terms of delay and power consumption, since their potential to exploit instruction-level parallelism is quite related to the size and number of ports of the register file. In conventional register renaming schemes, register releasing is conservatively done only after the instruction that redefines the same register is committed. Instead, we propose a scheme that releases registers as soon as the processor knows that there will be no further use of them. We present two early releasing hardware implementations with different performance/complexity trade-offs. Detailed cycle-level simulations show either a significant speedup for a given register file size, or a reduction in register file size for a given performance level.Peer ReviewedPostprint (published version