A Survey on Scheduling in IEEE 802.16 Mesh Mode

Cataloged from PDF version of article.IEEE 802.16 standard (also known as WiMAX) defines the wireless broadband network technology which aims to solve the so called last mile problem via providing high bandwidth Internet even to the rural areas for which the cable deployment is very costly. The standard mainly focuses on the MAC and PHY layer issues, supporting two transmission modes: PMP (Point-to-Multipoint) and mesh modes. Mesh mode is an optional mode developed as an extension to PMP mode and it has the advantage of having an improving performance as more subscribers are added to the system using multi-hop routes. In 802.16 MAC protocol, mesh mode slot allocation and reservation mechanisms are left open which makes this topic a hot research area. Hence, the focus of this survey will mostly be on the mesh mode, and the proposed scheduling algorithms and performance evaluation methods

WIMAX Basics from PHY Layer to Scheduling and Multicasting Approaches

WiMAX (Worldwide Interoperability for Microwave Access) is an emerging broadband wireless technology for providing Last mile solutions for supporting higher bandwidth and multiple service classes with various quality of service requirement. The unique architecture of the WiMAX MAC and PHY layers that uses OFDMA to allocate multiple channels with different modulation schema and multiple time slots for each channel allows better adaptation of heterogeneous user’s requirements. The main architecture in WiMAX uses PMP (Point to Multipoint), Mesh mode or the new MMR (Mobile Multi hop Mode) deployments where scheduling and multicasting have different approaches. In PMP SS (Subscriber Station) connects directly to BS (Base Station) in a single hop route so channel conditions adaptations and supporting QoS for classes of services is the key points in scheduling, admission control or multicasting, while in Mesh networks SS connects to other SS Stations or to the BS in a multi hop routes, the MMR mode extends the PMP mode in which the SS connects to either a relay station (RS) or to Bs. Both MMR and Mesh uses centralized or distributed scheduling with multicasting schemas based on scheduling trees for routing. In this paper a broad study is conducted About WiMAX technology PMP and Mesh deployments from main physical layers features with differentiation of MAC layer features to scheduling and multicasting approaches in both modes of operations

Adaptive load balancing routing algorithms for the next generation wireless telecommunications networks

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel UniversityWith the rapid development of wireless networks, mesh networks are evolving as a new important technology, presenting a high research and commercial interest. Additionally, wireless mesh networks have a wide variety of applications, offering the ability to provide network access in both rural and urban areas with low cost of maintenance. One of the main functionalities of a wireless mesh network is load balancing routing, which is the procedure of finding the best, according to some criteria, routes that data need to follow to transfer from one node to another. Routing is one of the state-of-the-art areas of research because the current algorithms and protocols are not efficient and effective due to the diversity of the characteristics of these networks. In this thesis, two new routing algorithms have been developed for No Intra-Cell Interference (NICI) and Limited Intra-Cell Interference (LICI) networks based on WiMAX, the most advanced wireless technology ready for deployment. The algorithms created are based on the classical Dijkstra and Ford-Fulkerson algorithms and can be implemented in the cases of unicast and multicast transmission respectively.State scholarships foundation of Greece

Improvement of Centralized Routing and Scheduling Using Cross-Layer Design and Multi-Slot Assignment in Wimax Mesh Networks

WiMAX (Worldwide Interoperability for Microwave Access) based wireless mesh network (WMN) aims to provide broadband wireless last-mile access. It is easy to deploy, has high speed data rate for large spanning area and is the key technology for the next generation wireless networking. The WiMAX mesh network is developed with the use of base station (BS) as the main controller for all the subscriber stations (SSs). This thesis proposes an optimized strategy namely cross-layer design in routing algorithms used find the best route for all SSs and scheduling algorithms, used to assign a time slot for each possible node transmission. The cross-layer design here is relying on the routing information in network layer and the scheduling in the medium access control (MAC) layer. This thesis also proposes a centralized scheduling algorithm that can avoid the collision by constructing routing path with multi-slot single transceiver system for WiMAX mesh networks. In our proposal, each node has one transceiver that can be tuned to any of the channels in the multi-slot assignment. The design parameters such as the number of the neighboring nodes, hop count to the BS, number of children per node, slot reuse, fairness, load balancing, quality of services (QoS) and node identifier (ID) are considered. Results of analysis show that the proposed algorithms significantly improve the system performance in the aspects of length of scheduling by 30.9%, channel utilization ratio (CUR) by 50.1%, throughput of the system by 49.7%, and the end to end average transmission delay by 56.7% as compared to the MC algorithm

Wireless broadband access: WiMAX and beyond - Investigation of bandwidth request mechanisms under point-to-multipoint mode of WiMAX networks

The WiMAX standard specifies a metropolitan area broadband wireless access air interface. In order to support QoS for multimedia applications, various bandwidth request and scheduling mechanisms are suggested in WiMAX, in which a subscriber station can send request messages to a base station, and the base station can grant or reject the request according to the available radio resources. This article first compares two fundamental bandwidth request mechanisms specified in the standard, random access vs. polling under the point-to-multipoint mode, a mandatory transmission mode. Our results demonstrate that random access outperforms polling when the request rate is low. However, its performance degrades significantly when the channel is congested. Adaptive switching between random access and polling according to load can improve system performance. We also investigate the impact of channel noise on the random access request mechanism

Resource allocation in WiMAX mesh networks

ix, 77 leaves : ill. ; 29 cmThe IEEE 802.16 standard popularly known as WiMAX is at the forefront of the technological drive. Achieving high system throughput in these networks is challenging due to interference which limits concurrent transmissions. In this thesis, we study routing and link scheduling inWiMAX mesh networks. We present simple joint routing and link scheduling algorithms that have outperformed most of the existing proposals in our experiments. Our session based routing and links scheduling produced results approximately 90% of a trivial lower bound. We also study the problem of quality of service (QoS) provisioning in WiMAX mesh networks. QoS has become an attractive area of study driven by the increasing demand for multimedia content delivered wirelessly. To accommodate the different applications, the IEEE 802.16 standard defines four classes of service. In this dissertation, we propose a comprehensive scheme consisting of routing, link scheduling, call admission control (CAC) and channel assignment that considers all classes of service. Much of the work in the literature considers each of these problems in isolation. Our routing schemes use a metric that combines interference and traffic load to compute routes for requests while our link scheduling ensures that the QoS requirements of admitted requests are strictly met. Results from our simulation indicate that our routing and link scheduling schemes significantly improve network performance when the network is congested

WiMAX Basics From Deployments to PHY Improvements

© ASEE 2014WiMAX (Worldwide Interoperability for Microwave Access) is an emerging broadband wireless technology for providing Last mile solutions for supporting higher bandwidth and multiple service classes with various quality of service requirement. The unique architecture of the WiMAX MAC and PHY layers that uses OFDMA to allocate multiple channels with different modulation schema and multiple time slots for each channel allows better adaptation of heterogeneous user’s requirements. The main architecture in WiMAX uses PMP (Point to Multipoint), Mesh mode or the new MMR (Mobile Multi hop Mode) deployments where scheduling and multicasting have different approaches. In PMP SS (Subscriber Station) connects directly to BS (Base Station) in a single hop route so channel conditions adaptations and supporting QoS for classes of services is the key points in scheduling, admission control or multicasting, while in Mesh networks SS connects to other SS Stations or to the BS in a multi hop routes, the MMR mode extends the PMP mode in which the SS connects to either a relay station (RS) or to Bs. Both MMR and Mesh uses centralized or distributed scheduling with multicasting schemas based on scheduling trees for routing. In this paper a broad study is conducted About WiMAX technology PMP and Mesh deployments from main physical layers features with differentiation of MAC layer features to scheduling and multicasting approaches in both modes of operations