Survey on Flight Control Technology for Large-Scale Helicopter

A literature review of flight control technology is presented for large-scale helicopter. Challenges of large-scale helicopter flight control system (FCS) design are illustrated. Following this, various flight control methodologies are described with respect to their engineering implementation and theoretical developments, whose advantages and disadvantages are also analyzed. Then, the challenging research issues on flight control technology are identified, and future directions are highlighted

Nonlinear robust control of tail-sitter aircrafts in flight mode transitions

© 2018 Elsevier Masson SAS In this paper, a nonlinear robust controller is proposed to deal with the flight mode transition control problem of tail-sitter aircrafts. During the mode transitions, the control problem is challenging due to the high nonlinearities and strong couplings. The tail-sitter aircraft model can be considered as a nominal part with uncertainties including nonlinear terms, parametric uncertainties, and external disturbances. The proposed controller consists of a nominal H∞controller and a nonlinear disturbance observer. The nominal H∞controller based on the nominal model is designed to achieve the desired trajectory tracking performance. The uncertainties are regarded as equivalent disturbances to restrain their influences by the nonlinear disturbance observer. Theoretical analysis and simulation results are given to show advantages of the proposed control method, compared with the standard H∞control approach

Adaptive neural fault-tolerant control of a 3-DOF model helicopter system

In this paper, an adaptive neural fault-tolerant control scheme is proposed for the three degrees of freedom model helicopter, subject to system uncertainties, unknown external disturbances, and actuator faults. To tackle system uncertainty and nonlinear actuator faults, a neural network disturbance observer is developed based on the radial basis function neural network. The unknown external disturbance and the unknown neural network approximation errors are treated as a compound disturbance that is estimated by another nonlinear disturbance observer. A disturbance observer-based adaptive neural fault-tolerant control scheme is then developed to track the desired system output in the presence of system uncertainty, external disturbance, and actuator faults. The stability of the whole closed-loop system is analyzed using the Lyapunov method, which guarantees the convergence of all closed-loop signals. Finally, the simulation results are presented to illustrate the effectiveness of the new control design techniques.Mou Chen, Peng Shi and Cheng-Chew Li

Automatic Flight Control Systems

The history of flight control is inseparably linked to the history of aviation itself. Since the early days, the concept of automatic flight control systems has evolved from mechanical control systems to highly advanced automatic fly-by-wire flight control systems which can be found nowadays in military jets and civil airliners. Even today, many research efforts are made for the further development of these flight control systems in various aspects. Recent new developments in this field focus on a wealth of different aspects. This book focuses on a selection of key research areas, such as inertial navigation, control of unmanned aircraft and helicopters, trajectory control of an unmanned space re-entry vehicle, aeroservoelastic control, adaptive flight control, and fault tolerant flight control. This book consists of two major sections. The first section focuses on a literature review and some recent theoretical developments in flight control systems. The second section discusses some concepts of adaptive and fault-tolerant flight control systems. Each technique discussed in this book is illustrated by a relevant example

Armstrong Flight Research Center Research Technology and Engineering Report 2015

I am honored to endorse the 2015 Neil A. Armstrong Flight Research Centers Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Centers agility to develop technologies supporting each of NASAs core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASAs mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Dont hesitate to contact them for more information or for collaboration ideas

Aeronautical Engineering: A special bibliography with indexes, supplement 74

This special bibliography lists 295 reports, articles, and other documents introduced into the NASA scientific and technical information system in August 1976

Model Predictive Control of an Unmanned Quadrotor Helicopter: Theory and Flight Tests

Model Predictive Control (MPC) has been well established and widely used in the process control industry since years. However, due to dependability of its success on availability of high computational power to handle burden of online repetitive calculations, and existence of a precise mathematical model of the controlled plant, it has found less application in other areas of systems and control, specifically speaking when it comes to fast dynamics control systems featuring a highly elaborate plant. Preceded by previous successful efforts made in the application of MPC to other areas of systems and control rather than process control, this thesis initiates employment of MPC in the unmanned aerial systems industry. To this end, the system of the quadrotor UAV testbed in the Networked Autonomous Vehicles Laboratory of Concordia University is chosen. A three dimensional autopilot control system within the framework of MPC is developed and tested through numerous flight experiments. The overall performance of the quadrotor helicopter is evaluated under autonomous fight for three flight scenarios of trajectory tracking, payload drop, robustness to voltage/current drop, and fault-tolerant control in the presence of faults induced by reduced actuator effectiveness. This has been achieved by the proper use of a model reduction technique as well as a fast optimization algorithm to address the issues with high computation, and incorporation of the integral action control in the MPC formulation to meet the offset-free tracking requirement. Both simulation and experimental results are presented to demonstrate success of the design

A Summary of NASA Rotary Wing Research: Circa 20082018

The general public may not know that the first A in NASA stands for Aeronautics. If they do know, they will very likely be surprised that in addition to airplanes, the A includes research in helicopters, tiltrotors, and other vehicles adorned with rotors. There is, arguably, no subsonic air vehicle more difficult to accurately analyze than a vehicle with lift-producing rotors. No wonder that NASA has conducted rotary wing research since the days of the NACA and has partnered, since 1965, with the U.S. Army in order to overcome some of the most challenging obstacles to understanding the behavior of these vehicles. Since 2006, NASA rotary wing research has been performed under several different project names [Gorton et al., 2015]: Subsonic Rotary Wing (SRW) (20062012), Rotary Wing (RW) (20122014), and Revolutionary Vertical Lift Technology (RVLT) (2014present). In 2009, the SRW Project published a report that assessed the status of NASA rotorcraft research; in particular, the predictive capability of NASA rotorcraft tools was addressed for a number of technical disciplines. A brief history of NASA rotorcraft research through 2009 was also provided [Yamauchi and Young, 2009]. Gorton et al. [2015] describes the system studies during 20092011 that informed the SRW/RW/RVLT project investment prioritization and organization. The authors also provided the status of research in the RW Project in engines, drive systems, aeromechanics, and impact dynamics as related to structural dynamics of vertical lift vehicles. Since 2009, the focus of research has shifted from large civil VTOL transports, to environmentally clean aircraft, to electrified VTOL aircraft for the urban air mobility (UAM) market. The changing focus of rotorcraft research has been a reflection of the evolving strategic direction of the NASA Aeronautics Research Mission Directorate (ARMD). By 2014, the project had been renamed the Revolutionary Vertical Lift Technology Project. In response to the 2014 NASA Strategic Plan, ARMD developed six Strategic Thrusts. Strategic Thrust 3B was defined as the Ultra-Efficient Commercial VehiclesVertical Lift Aircraft. Hochstetler et al. [2017] uses Thrust 3B as an example for developing metrics usable by ARMD to measure the effectiveness of each of the Strategic Thrusts. The authors provide near-, mid-, and long-term outcomes for Thrust 3B with corresponding benefits and capabilities. The importance of VTOL research, especially with the rapidly expanding UAM market, eventually resulted in a new Strategic Thrust (to begin in 2020): Thrust 4Safe, Quiet, and Affordable Vertical Lift Air Vehicles. The underlying rotary wing analysis tools used by NASA are still applicable to traditional rotorcraft and have been expanded in capability to accommodate the growing number of VTOL configurations designed for UAM. The top-level goal of the RVLT Project remains unchanged since 2006: Develop and validate tools, technologies and concepts to overcome key barriers for vertical lift vehicles. In 2019, NASA rotary wing/VTOL research has never been more important for supporting new aircraft and advancements in technology. 2 A decade is a reasonable interval to pause and take stock of progress and accomplishments. In 10 years, digital technology has propelled progress in computational efficiency by orders of magnitude and expanded capabilities in measurement techniques. The purpose of this report is to provide a compilation of the NASA rotary wing research from ~2008 to ~2018. Brief summaries of publications from NASA, NASA-funded, and NASA-supported research are provided in 12 chapters: Acoustics, Aeromechanics, Computational Fluid Dynamics (External Flow), Experimental Methods, Flight Dynamics and Control, Drive Systems, Engines, Crashworthiness, Icing, Structures and Materials, Conceptual Design and System Analysis, and Mars Helicopter. We hope this report serves as a useful reference for future NASA vertical lift researchers

Handling Qualities Assessment of a Pilot Cueing System for Autorotation Maneuvers

This paper details the design and limited flight testing of a preliminary system for visual pilot cueing during autorotation maneuvers. The cueing system is based on a fully-autonomous, multi-phase autorotation control law that has been shown to successfully achieve autonomous autorotation landing in unmanned helicopters. To transition this control law to manned systems, it is employed within a cockpit display to drive visual markers which indicate desired collective pitch and longitudinal cyclic positions throughout the entire maneuver, from autorotation entry to touchdown. A series of simulator flight experiments performed at University of Liverpool’s HELIFLIGHT-R simulator are documented, in which pilots attempt autorotation with and without the pilot cueing system in both good and degraded visual environments. Performance of the pilot cueing system is evaluated based on both subjective pilot feedback and objective measurements of landing survivability metrics, demonstrating suitable preliminary performance of the system