Synergistic mutual potentiation of antifungal activity of Zuccagnia punctata Cav. and Larrea nitida Cav. extracts in clinical isolates of Candida albicans and Candida glabrata

Background: Zuccagnia punctata Cav. (Fabaceae) and Larrea nitida Cav. (Zygophyllaceae) are indistinctly or jointly used in traditional medicine for the treatment of fungal-related infections. Although their dichloromethane (DCM) extract have demonstrated moderate antifungal activities when tested on their own, antifungal properties of combinations of both plants have not been assessed previously. Purpose: The aim of this study was to establish with statistical rigor whether Z. punctata (ZpE) and L. nitida DCM extract (LnE) interact synergistically against the clinically important fungi Candida albicans and Candida glabrata and to characterize the most synergistic combinations. Study design: For synergism assessment, the statistical-based Boik's design was applied. Eight ZpE–LnE fixed-ratio mixtures were prepared from four different months of 1 year and tested against Candida strains. Lϕ (Loewe index) of each mixture at different fractions affected (ϕ) allowed for the finding of the most synergistic combinations, which were characterized by HPLC fingerprint and by the quantitation of the selected marker compounds. Methods: Lϕ and confidence intervals were determined in vitro with the MixLow method, once the estimated parameters from the dose–response curves of independent extracts and mixtures, were obtained. Markers (four flavonoids for ZpE and three lignans for LnE) were quantified in each extract and their combinations, with a valid HPLC–UV method. The 3D-HPLC profiles of the most synergistic mixtures were obtained by HPLC–DAD. Results: Three over four IC50ZpE/IC50LnE fixed-ratio mixtures displayed synergistic interactions at effect levels ϕ > 0.5 against C. albicans. The dosis of the most synergistic (Lϕ = 0.62) mixture was 65.96 µg/ml (ZpE = 28%; LnE = 72%) containing 8 and 36% of flavonoids and lignans respectively. On the other hand, one over four IC50ZpE/IC50LnE mixtures displays synergistic interactions at ϕ > 0.5 against C. glabrata. The dosis of the most synergistic (Lϕ = 0.67) mixture was 168.23 µg/ml (ZpE = 27%; LnE = 73%) with 9.7 and 31.6% of flavonoids and lignans respectively. Conclusions: Studies with the statistical-based MixLow method, allowed for the finding of the most ZpE–LnE synergistic mixtures, giving support to a proper joint use of both antifungal herbs in traditional medicine.Fil: Butassi, Estefanía. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Svetaz, Laura Andrea. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Ivancovich, Juan J.. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas; ArgentinaFil: Feresin, Gabriela Egly. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Tapia, Alejandro A.. Universidad Nacional de San Juan. Facultad de Ingeniería. Instituto de Biotecnología; ArgentinaFil: Zacchino, Susana Alicia Stella. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

An integrated targeted and untargeted approach for the analysis of ergot alkaloids in cereals using UHPLC - hybrid quadrupole time-of-flight mass spectrometry

An ultra-high performance liquid chromatography hybrid quadrupole time of flight (Q-TOF) mass spectrometry (MS) method is described for the simultaneous quantitative determination of common ergot alkaloids and the screening, detection and identification of unexpected (less studied or novel) members of this class of toxic fungal secondary metabolites. The employed analytical strategy involves an untargeted data acquisition (consisting of full scan TOF MS survey and information dependent acquisition MS/MS scans) and the processing of data using both targeted and untargeted approaches. Method performance characteristics for the quantitative analysis of 6 common ergot alkaloids i.e. ergometrine, ergosine, ergotamine, ergocornine, ergocristine, ergokryptine and their corresponding epimers in rye were comparable to those previously reported for triple-quadrupole (QqQ) MS/MS. The method limits of quantification (LOQ) were in the range from 3 to 19 mu g/kg, and good linearity was observed for the different ergot alkaloids in the range from LOQ to 1000 mu g/kg. Furthermore, the method demonstrated good precision (relative standard deviations at 50 mu g/kg not higher than 14.6 and 16.2% for the intra-day and inter-day precision, respectively), and the trueness values at different concentration levels were all between 89 and 115%. The method was applied for the analysis of a set of 17 rye samples and demonstrated the presence of these ergot alkaloids in the range from <LOQ to 2,811 mu g/kg. Further mining of the same data based on a 'non-targeted peak finding' algorithm and the use of full MS and MS/MS accurate mass data allowed the detection and identification of 19 ergot alkaloids that are commonly not included in most analytical methods using QqQ instruments. Some of these alkaloids are reported for the first time in naturally contaminated samples

Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve

Analog-to-digital conversion techniques for precision photometry

Three types of analog-to-digital converters are described: parallel, successive-approximation, and integrating. The functioning of comparators and sample-and-hold amplifiers is explained. Differential and integral linearity are defined, and good and bad examples are illustrated. The applicability and relative advantages of the three types of converters for precision astronomical photometric measurements are discussed. For most measurements, integral linearity is more important than differential linearity. Successive-approximation converters should be used with multielement solid state detectors because of their high speed, but dual slope integrating converters may be superior for use with single element solid state detectors where speed of digitization is not a factor. In all cases, the input signal should be tailored so that they occupy the upper part of the converter's dynamic range; this can be achieved by providing adjustable gain, or better by varying the integration time of the observation if possible

Analogue to Digital and Digital to Analogue Converters (ADCs and DACs): A Review Update

This is a review paper updated from that presented for CAS 2004. Essentially, since then, commercial components have continued to extend their performance boundaries but the basic building blocks and the techniques for choosing the best device and implementing it in a design have not changed. Analogue to digital and digital to analogue converters are crucial components in the continued drive to replace analogue circuitry with more controllable and less costly digital processing. This paper discusses the technologies available to perform in the likely measurement and control applications that arise within accelerators. It covers much of the terminology and 'specmanship' together with an application-oriented analysis of the realisable performance of the various types. Finally, some hints and warnings on system integration problems are given.Comment: 15 pages, contribution to the 2014 CAS - CERN Accelerator School: Power Converters, Baden, Switzerland, 7-14 May 201

Transiting Exoplanet Studies and Community Targets for JWST's Early Release Science Program

The James Webb Space Telescope will revolutionize transiting exoplanet atmospheric science due to its capability for continuous, long-duration observations and its larger collecting area, spectral coverage, and spectral resolution compared to existing space-based facilities. However, it is unclear precisely how well JWST will perform and which of its myriad instruments and observing modes will be best suited for transiting exoplanet studies. In this article, we describe a prefatory JWST Early Release Science (ERS) program that focuses on testing specific observing modes to quickly give the community the data and experience it needs to plan more efficient and successful future transiting exoplanet characterization programs. We propose a multi-pronged approach wherein one aspect of the program focuses on observing transits of a single target with all of the recommended observing modes to identify and understand potential systematics, compare transmission spectra at overlapping and neighboring wavelength regions, confirm throughputs, and determine overall performances. In our search for transiting exoplanets that are well suited to achieving these goals, we identify 12 objects (dubbed "community targets") that meet our defined criteria. Currently, the most favorable target is WASP-62b because of its large predicted signal size, relatively bright host star, and location in JWST's continuous viewing zone. Since most of the community targets do not have well-characterized atmospheres, we recommend initiating preparatory observing programs to determine the presence of obscuring clouds/hazes within their atmospheres. Measurable spectroscopic features are needed to establish the optimal resolution and wavelength regions for exoplanet characterization. Other initiatives from our proposed ERS program include testing the instrument brightness limits and performing phase-curve observations.(Abridged)Comment: This is a white paper that originated from an open discussion at the Enabling Transiting Exoplanet Science with JWST workshop held November 16 - 18, 2015 at STScI (http://www.stsci.edu/jwst/science/exoplanets). Accepted for publication in PAS

Potential Capabilities of Lunar Laser Ranging for Geodesy and Relativity

Lunar Laser Ranging (LLR), which has been carried out for more than 35 years, is used to determine many parameters within the Earth-Moon system. This includes coordinates of terrestrial ranging stations and that of lunar retro-reflectors, as well as lunar orbit, gravity field, and its tidal acceleration. LLR data analysis also performs a number of gravitational physics experiments such as test of the equivalence principle, search for time variation of the gravitational constant, and determines value of several metric gravity parameters. These gravitational physics parameters cause both secular and periodic effects on the lunar orbit that are detectable with LLR. Furthermore, LLR contributes to the determination of Earth orientation parameters (EOP) such as nutation, precession (including relativistic precession), polar motion, and UT1. The corresponding LLR EOP series is three decades long. LLR can be used for the realization of both the terrestrial and selenocentric reference frames. The realization of a dynamically defined inertial reference frame, in contrast to the kinematically realized frame of VLBI, offers new possibilities for mutual cross-checking and confirmation. Finally, LLR also investigates the processes related to the Moon's interior dynamics. Here, we review the LLR technique focusing on its impact on Geodesy and Relativity. We discuss the modern observational accuracy and the level of existing LLR modeling. We present the near-term objectives and emphasize improvements needed to fully utilize the scientific potential of LLR.Comment: 7 pages, 7 figures, 2 tables. Talk given at `Dynamic Planet 2005: Monitoring and Understanding a Dynamic Planet with Geodetic and Oceanographic Tools,'' a Joint Assembly of International Associations: IAG, IAPSO and IABO, Cairns, Australia, 22-26 August 200