A compressible Lagrangian framework for the simulation of underwater implosion problems

The development of efficient algorithms to understand implosion dynamics presents a number of challenges. The foremost challenge is to efficiently represent the coupled compressible fluid dynamics of internal air and surrounding water. Secondly, the method must allow one to accurately detect or follow the interface between the phases. Finally, it must be capable of resolving any shock waves which may be created in air or water during the final stage of the collapse. We present a fully Lagrangian compressible numerical framework for the simulation of underwater implosion. Both air and water are considered compressible and the equations for the Lagrangian shock hydrodynamics are stabilized via a variationally consistent multiscale method [109]. A nodally perfect matched definition of the interface is used [57, 25] and then the kinetic variables, pressure and density, are duplicated at the interface level. An adaptive mesh generation procedure, which respects the interface connectivities, is applied to provide enough refinement at the interface level. This framework is then used to simulate the underwater implosion of a large cylindrical bubble, with a size in the order of cm. Rapid collapse and growth of the bubble occurred on very small spatial (0.3mm), and time (0.1ms) scales followed by Rayleigh-Taylor instabilities at the interface, in addition to the shock waves traveling in the fluid domains are among the phenomena that are observed in the simulation. We then extend our framework to model the underwater implosion of a cylindrical aluminum container considering a monolithic fluid-structure interaction (FSI). The aluminum cylinder, which separates the internal atmospheric-pressure air from the external high-pressure water, is modeled by a three node rotation-free shell element. The cylinder undergoes fast transient deformations, large enough to produce self-contact along it. A novel elastic frictionless contact model is used to detect contact and compute the non-penetrating forces in the discretized domain between the mid-planes of the shell. Two schemes are tested, implicit using the predictor/multi-corrector Bossak scheme, and explicit, using the forward Euler scheme. The results of the two simulations are compared with experimental data.El desarrollo de métodos eficientes para modelar la dinámica de implosión presenta varios desafíos. El primero es una representación eficaz de la dinámica del sistema acoplado de aire-agua. El segundo es que el método tiene que permitir una detección exacta o un seguimiento adecuado de la interfase entre ambas fases. Por último el método tiene que ser capaz de resolver cualquier choque que podría generar en el aire o en el agua, sobre todo en la última fase del colapso. Nosotros presentamos un método numérico compresible y totalmente Lagrangiano para simular la implosión bajo el agua. Tanto el aire como el agua se consideran compresibles y las ecuaciones Lagrangianos para la hidrodinámica del choque se estabilizan mediante un método multiescala que es variacionalmente consistente [109]. Se utiliza una definición de interfase que coincide perfectamente con los nodos [57, 25]. Ésta, nos facilita duplicar eficazmente las variables cinéticas como la presión y la densidad en los nodos de la interfase. Con el fin de obtener suficiente resolución alrededor de la interfase, la malla se genera de forma adaptativa y respetando la posición de la interfase. A continuación el método desarrollado se utiliza para simular la implosión bajo el agua de una burbuja cilíndrica del tamaño de un centímetro. Varios fenómenos se han capturado durante el colapso: un ciclo inmediato de colapso-crecimiento de la burbuja que ocurre en un espacio (0.3mm) y tiempo (0.1ms) bastante limitado, aparición de inestabilidades de tipo Rayleigh-Taylor en la interfase y formaron de varias ondas de choque que viajan tanto en el agua como en el aire. Después, seguimos el desarrollo del método para modelar la implosión bajo el agua de un contenedor metálico considerando una interacción monolítica de fluido y estructura. El cilindro de aluminio, que a su vez contiene aire a presión atmosférica y está rodeada de agua en alta presión, se modelando con elementos de lámina de tres nodos y sin grados de libertad de rotación. El cilindro se somete a deformaciones transitorias suficientemente rápidos y enormes hasta llegar a colapsar. Un nuevo modelo elástico de contacto sin considerar la fricción se ha desarrollado para detectar el contacto y calcular las fuerzas en el dominio discretizado entre las superficies medianas de las laminas. Dos esquemas temporales están considerados, uno es implícito utilizando el método de Bossak y otro es explícito utilizando Forward Euler. Al final los resultados de ambos casos se comparan con los resultados experimentales

A compressible Lagrangian framework for the simulation of underwater implosion problems

The development of efficient algorithms to understand implosion dynamics presents a number of challenges. The foremost challenge is to efficiently represent the coupled compressible fluid dynamics of internal air and surrounding water. Secondly, the method must allow one to accurately detect or follow the interface between the phases. Finally, it must be capable of resolving any shock waves which may be created in air or water during the final stage of the collapse. We present a fully Lagrangian compressible numerical framework for the simulation of underwater implosion. Both air and water are considered compressible and the equations for the Lagrangian shock hydrodynamics are stabilized via a variationally consistent multiscale method. A nodally perfect matched definition of the interface is used and then the kinetic variables, pressure and density, are duplicated at the interface level. An adaptive mesh generation procedure, which respects the interface connectivities, is applied to provide enough refinement at the interface level. This framework is then used to simulate the underwater implosion of a large cylindrical bubble, with a size in the order of cm. Rapid collapse and growth of the bubble occurred on very small spatial (0.3mm), and time (0.1ms) scales followed by Rayleigh-Taylor instabilities at the interface, in addition to the shock waves traveling in the fluid domains are among the phenomena that are observed in the simulation. We then extend our framework to model the underwater implosion of a cylindrical aluminum container considering a monolithic fluid-structure interaction (FSI). The aluminum cylinder, which separates the internal atmospheric-pressure air from the external high-pressure water, is modeled by a three node rotation-free shell element. The cylinder undergoes fast transient deformations, large enough to produce self-contact along it. A novel elastic frictionless contact model is used to detect contact and compute the non-penetrating forces in the discretized domain between the mid-planes of the shell. Two schemes are tested, implicit using the predictor/multi-corrector Bossak scheme, and explicit, using the forward Euler scheme. The results of the two simulations are compared with experimental data

SOLID-SHELL FINITE ELEMENT MODELS FOR EXPLICIT SIMULATIONS OF CRACK PROPAGATION IN THIN STRUCTURES

Crack propagation in thin shell structures due to cutting is conveniently simulated using explicit finite element approaches, in view of the high nonlinearity of the problem. Solidshell elements are usually preferred for the discretization in the presence of complex material behavior and degradation phenomena such as delamination, since they allow for a correct representation of the thickness geometry. However, in solid-shell elements the small thickness leads to a very high maximum eigenfrequency, which imply very small stable time-steps. A new selective mass scaling technique is proposed to increase the time-step size without affecting accuracy. New ”directional” cohesive interface elements are used in conjunction with selective mass scaling to account for the interaction with a sharp blade in cutting processes of thin ductile shells

An upwind cell centred finite volume method for large strain explicit solid dynamics in OpenFOAM

Cotutela Universitat Politècnica de Catalunya i Swansea UniversityIn practical engineering applications involving extremely complex geometries, meshing typically constitutes a large portion of the overall design and analysis time. In the computational mechanics community, the ability to perform calculations on tetrahedral meshes has become increasingly important. For these reasons, automated tetrahedral mesh generation by means of Delaunay and advancing front techniques have recently received increasing attention in a number of applications, namely: crash impact simulations, cardiovascular modelling, blast and fracture modelling. Unfortunately, modern industry codes in solid mechanics typically rely on the use of traditional displacement based Finite Element formulations which possess several distinct disadvantages, namely: (1) reduced order of convergence for strains and stresses in comparison with displacements; (2) high frequency noise in the vicinity of shocks; and (3) numerical instabilities associated with shear locking, volumetric locking and pressure checker-boarding. In order to address the above mentioned shortcomings, a new mixed-based set of equations for solid dynamics formulated in a system of first order hyperbolic conservation laws was introduced. Crucially, the new set of conservation laws has a similar structure to that of the well known Euler equations in the context of Computational Fluid Dynamics (CFD). This enables us to borrow some of the available CFD technologies and to adapt the method in the context of solid dynamics. This thesis builds on the work carried out by Lee et al. 2013 by further developing the upwind cell centred finite volume framework for the numerical analysis of large strain explicit solid dynamics and its tailor-made implementation within the open source code OpenFOAM, extensively used in industrial and academic environments. The object oriented nature of OpenFOAM implementation provides a very efficient platform for future development. In this computational framework, the primary unknown variables are linear momentum and deformation gradient tensor of the system. Moreover, the formulation is further extended for an additional set of geometric strain measures comprising of the co-factor of deformation gradient tensor and the Jacobian of deformation, in order to simulate polyconvex constitutive models ensuring material stability. The domain is spatially discretised using a standard Godunov-type cell centred framework where second order accuracy is achieved by employing a linear reconstruction procedure in conjunction with a slope limiter. This leads to discontinuities in variables at the cell interface which motivate the use of a Riemann solver by introducing an upwind bias into the evaluation of numerical contact fluxes. The acoustic Riemann solver presented is further developed by applying preconditioned dissipation to improve its performance in the near incompressibility regime and extending its range to contact applications. Moreover, two evolutionary frameworks are proposed in this study to satisfy the underlying involutions (or compatibility conditions) of the system. Additionally, the spatial discretisation is alternatively represented through a nodal cell centred finite volume framework for comparison purposes. From a temporal discretisation point of view, a two stage Total Variation Diminishing Runge-Kutta time integrator is employed to ensure second order accuracy. Additionally, inclusion of a global posteriori angular momentum projection procedure enables preservation of angular momenta of the system. Finally, benchmark numerical examples are simulated to demonstrate various aspects of the formulation including mesh convergence, momentum preservation and the locking-free nature of the formulation on complex computational domains.En aplicaciones prácticas de ingeniería que implican geometrías extremadamente complejas, el mallado requiere típicamente una gran parte del tiempo total de diseño y análisis. En la comunidad de mecánica computacional, la capacidad de realizar cálculos sobre mallas tetraédricas está siendo cada vez más importante. Por estas razones, la generación automatizada de mallas tetraédricas por medio de técnicas de Delaunay y frente avanzado han recibido cada vez más atención en ciertas aplicaciones, a saber: simulaciones de impacto, modelado cardiovascular, modelado de explosión y fractura. Por desgracia, los códigos en la industria moderna para mecánica de sólidos se basan normalmente en el uso de formulaciones tradicionales de Elementos Finitos formulados en desplazamientos que poseen varias desventajas: (1) menor orden de convergencia para tensiones y deformaciones; (2) ruido de alta frecuencia cerca de las ondas de choque; y (3) inestabilidades numéricas asociadas con el bloqueo a cortante, el bloqueo volumétrico y oscilaciones de presión. Con el fin de abordar estas deficiencias, se introduce un nuevo conjunto de ecuaciones para mecánica del sólido formulada como un sistema de leyes de conservación de primer orden basada en una formulación mixta. Fundamentalmente, el nuevo sistema de leyes de conservación tiene una estructura similar a la de las famosas ecuaciones de Euler en el contexto de la Dinámica de Fluidos Computacional (CFD). Esto nos permite aprovechar algunas de las tecnologías CFD disponibles y adaptar el método en el contexto de la Mecánica de Sólidos. Esta tesis se basa en el trabajo realizado en Lee et al. 2013 mediante el desarrollo de la estructura de volúmenes finitos centrados en celdas upwind para el análisis numérico de dinámica del sólido explícita en grandes deformaciones y su implementación específicamente diseñada dentro del software de código abierto OpenFOAM, ampliamente utilizado ámbito académico e industrial. Además, la naturaleza orientada a objetos de su implementación proporciona una plataforma muy eficiente para su desarrollo posterior. En este marco computacional, las incógnitas básicas de este sistema son el momento lineal y el tensor gradiente de deformación. Asimismo, la formulación se extiende adicionalmente para un conjunto adicional de medidas de deformación que comprenden el cofactor del tensor gradiente de deformación y el jacobiano de deformación, con el fin de simular modelos constitutivos policonvexos que aseguran la estabilidad del material. El dominio se discretiza espacialmente usando un marco centrado en células de tipo Godunov estándar, donde se consigue la precisión de segundo orden empleando un procedimiento de reconstrucción lineal junto con un limitador de pendiente. Esto conduce a discontinuidades en las variables en la interfase de la célula que motivan el uso de un solucionador de Riemann mediante la introducción de un sesgo contra el viento en la evaluación de flujos de contacto numéricos. El presente solucionador acústico de Riemann es posteriormente desarrollado aplicando disipación pre-condicionada para mejorar su rendimiento en el cercano pero incompresibilidad régimen y extender su gama a aplicaciones de contacto. Además, se proponen dos marcos evolutivos en este estudio para satisfacer las involuciones subyacentes (o condiciones de compatibilidad) del sistema. Además, la discretización espacial se representa alternativamente a través de un marco de volumen finito centrado en células nodales para fines de comparación. Desde el punto de vista de la discretización temporal, se emplea un integrador temporal de Runge-Kutta de dos etapas con Disminución de Variación Total para asegurar segundo orden de precision. Finalmente, se simulan ejemplos numéricos de referencia para demostrar varios aspectos de la formulación que incluyen convergencia de malla, conservación de momento y la naturaleza libre de bloqueo de la formulación en dominios computacionales complejos.Postprint (published version

An upwind cell centred finite volume method for large strain explicit solid dynamics in OpenFOAM

In practical engineering applications involving extremely complex geometries, meshing typically constitutes a large portion of the overall design and analysis time. In the computational mechanics community, the ability to perform calculations on tetrahedral meshes has become increasingly important. For these reasons, automated tetrahedral mesh generation by means of Delaunay and advancing front techniques have recently received increasing attention in a number of applications, namely: crash impact simulations, cardiovascular modelling, blast and fracture modelling. Unfortunately, modern industry codes in solid mechanics typically rely on the use of traditional displacement based Finite Element formulations which possess several distinct disadvantages, namely: (1) reduced order of convergence for strains and stresses in comparison with displacements; (2) high frequency noise in the vicinity of shocks; and (3) numerical instabilities associated with shear locking, volumetric locking and pressure checker-boarding. In order to address the above mentioned shortcomings, a new mixed-based set of equations for solid dynamics formulated in a system of first order hyperbolic conservation laws was introduced. Crucially, the new set of conservation laws has a similar structure to that of the well known Euler equations in the context of Computational Fluid Dynamics (CFD). This enables us to borrow some of the available CFD technologies and to adapt the method in the context of solid dynamics. This thesis builds on the work carried out by Lee et al. 2013 by further developing the upwind cell centred finite volume framework for the numerical analysis of large strain explicit solid dynamics and its tailor-made implementation within the open source code OpenFOAM, extensively used in industrial and academic environments. The object oriented nature of OpenFOAM implementation provides a very efficient platform for future development. In this computational framework, the primary unknown variables are linear momentum and deformation gradient tensor of the system. Moreover, the formulation is further extended for an additional set of geometric strain measures comprising of the co-factor of deformation gradient tensor and the Jacobian of deformation, in order to simulate polyconvex constitutive models ensuring material stability. The domain is spatially discretised using a standard Godunov-type cell centred framework where second order accuracy is achieved by employing a linear reconstruction procedure in conjunction with a slope limiter. This leads to discontinuities in variables at the cell interface which motivate the use of a Riemann solver by introducing an upwind bias into the evaluation of numerical contact fluxes. The acoustic Riemann solver presented is further developed by applying preconditioned dissipation to improve its performance in the near incompressibility regime and extending its range to contact applications. Moreover, two evolutionary frameworks are proposed in this study to satisfy the underlying involutions (or compatibility conditions) of the system. Additionally, the spatial discretisation is alternatively represented through a nodal cell centred finite volume framework for comparison purposes. From a temporal discretisation point of view, a two stage Total Variation Diminishing Runge-Kutta time integrator is employed to ensure second order accuracy. Additionally, inclusion of a global posteriori angular momentum projection procedure enables preservation of angular momenta of the system. Finally, benchmark numerical examples are simulated to demonstrate various aspects of the formulation including mesh convergence, momentum preservation and the locking-free nature of the formulation on complex computational domains.En aplicaciones prácticas de ingeniería que implican geometrías extremadamente complejas, el mallado requiere típicamente una gran parte del tiempo total de diseño y análisis. En la comunidad de mecánica computacional, la capacidad de realizar cálculos sobre mallas tetraédricas está siendo cada vez más importante. Por estas razones, la generación automatizada de mallas tetraédricas por medio de técnicas de Delaunay y frente avanzado han recibido cada vez más atención en ciertas aplicaciones, a saber: simulaciones de impacto, modelado cardiovascular, modelado de explosión y fractura. Por desgracia, los códigos en la industria moderna para mecánica de sólidos se basan normalmente en el uso de formulaciones tradicionales de Elementos Finitos formulados en desplazamientos que poseen varias desventajas: (1) menor orden de convergencia para tensiones y deformaciones; (2) ruido de alta frecuencia cerca de las ondas de choque; y (3) inestabilidades numéricas asociadas con el bloqueo a cortante, el bloqueo volumétrico y oscilaciones de presión. Con el fin de abordar estas deficiencias, se introduce un nuevo conjunto de ecuaciones para mecánica del sólido formulada como un sistema de leyes de conservación de primer orden basada en una formulación mixta. Fundamentalmente, el nuevo sistema de leyes de conservación tiene una estructura similar a la de las famosas ecuaciones de Euler en el contexto de la Dinámica de Fluidos Computacional (CFD). Esto nos permite aprovechar algunas de las tecnologías CFD disponibles y adaptar el método en el contexto de la Mecánica de Sólidos. Esta tesis se basa en el trabajo realizado en Lee et al. 2013 mediante el desarrollo de la estructura de volúmenes finitos centrados en celdas upwind para el análisis numérico de dinámica del sólido explícita en grandes deformaciones y su implementación específicamente diseñada dentro del software de código abierto OpenFOAM, ampliamente utilizado ámbito académico e industrial. Además, la naturaleza orientada a objetos de su implementación proporciona una plataforma muy eficiente para su desarrollo posterior. En este marco computacional, las incógnitas básicas de este sistema son el momento lineal y el tensor gradiente de deformación. Asimismo, la formulación se extiende adicionalmente para un conjunto adicional de medidas de deformación que comprenden el cofactor del tensor gradiente de deformación y el jacobiano de deformación, con el fin de simular modelos constitutivos policonvexos que aseguran la estabilidad del material. El dominio se discretiza espacialmente usando un marco centrado en células de tipo Godunov estándar, donde se consigue la precisión de segundo orden empleando un procedimiento de reconstrucción lineal junto con un limitador de pendiente. Esto conduce a discontinuidades en las variables en la interfase de la célula que motivan el uso de un solucionador de Riemann mediante la introducción de un sesgo contra el viento en la evaluación de flujos de contacto numéricos. El presente solucionador acústico de Riemann es posteriormente desarrollado aplicando disipación pre-condicionada para mejorar su rendimiento en el cercano pero incompresibilidad régimen y extender su gama a aplicaciones de contacto. Además, se proponen dos marcos evolutivos en este estudio para satisfacer las involuciones subyacentes (o condiciones de compatibilidad) del sistema. Además, la discretización espacial se representa alternativamente a través de un marco de volumen finito centrado en células nodales para fines de comparación. Desde el punto de vista de la discretización temporal, se emplea un integrador temporal de Runge-Kutta de dos etapas con Disminución de Variación Total para asegurar segundo orden de precision. Finalmente, se simulan ejemplos numéricos de referencia para demostrar varios aspectos de la formulación que incluyen convergencia de malla, conservación de momento y la naturaleza libre de bloqueo de la formulación en dominios computacionales complejos

FIC/FEM formulation with matrix stabilizing terms for incompressible flows at low and high Reynolds numbers

The final publication is available at Springer via http://dx.doi.org/10.1007/s00466-006-0060-yWe present a general formulation for incompressible fluid flow analysis using the finite element method. The necessary stabilization for dealing with convective effects and the incompressibility condition are introduced via the Finite Calculus method using a matrix form of the stabilization parameters. This allows to model a wide range of fluid flow problems for low and high Reynolds numbers flows without introducing a turbulence model. Examples of application to the analysis of incompressible flows with moderate and large Reynolds numbers are presented.Peer ReviewedPostprint (author's final draft

A first order hyperbolic framework for large strain computational solid dynamics: An upwind cell centred Total Lagrangian scheme

This paper builds on recent work developed by the authors for the numerical analysis of large strain solid dynamics, by introducing an upwind cell centred hexahedral Finite Volume framework implemented within the open source code OpenFOAM [http://www.openfoam.com/http://www.openfoam.com/]. In Lee, Gil and Bonet [1], a first order hyperbolic system of conservation laws was introduced in terms of the linear momentum and the deformation gradient tensor of the system, leading to excellent behaviour in two dimensional bending dominated nearly incompressible scenarios. The main aim of this paper is the extension of this algorithm into three dimensions, its tailor-made implementation into OpenFOAM and the enhancement of the formulation with three key novelties. First, the introduction of two different strategies in order to ensure the satisfaction of the underlying involutions of the system, that is, that the deformation gradient tensor must be curl-free throughout the deformation process. Second, the use of a discrete angular momentum projection algorithm and a monolithic Total Variation Diminishing Runge-Kutta time integrator combined in order to guarantee the conservation of angular momentum. Third, and for comparison purposes, an adapted Total Lagrangian version of the Hyperelastic-GLACE nodal scheme of Kluth and Despr´es [2] is presented. A series of challenging numerical examples are examined in order to assess the robustness and accuracy of the proposed algorithm, benchmarking it against an ample spectrum of alternative numerical strategies developed by the authors in recent publications

Computation of turbulent flows using a finite calculus–finite element formulation

We present a formulation for analysis of turbulent incompressible flows using a stabilized finite element method (FEM) based on the finite calculus (FIC) procedure. The stabilization terms introduced by the FIC approach allow to solve a wide range of fluid flow problems at different Reynolds numbers, including turbulent flows, without the need of a turbulence model. Examples of application of the FIC/FEM formulation to the analysis of 2D and 3D incompressible flows at large Reynolds numbers exhibiting turbulence features are presented

Computation of turbulent flows using a finite element formulation

We present a formulation for analysis of turbulent incompressible flows using a stabilized finite element method (FEM) based on the finite calculus (FIC) procedure. The stabilization terms introduced by the FIC approach allow to solve a wide range of fluid flow problems at different Reynolds numbers, including turbulent flows, without the need of a turbulence model. Examples of application of the FIC/FEM formulation to the analysis of 2D and 3D incompressible flows at large Reynolds numbers exhibiting turbulence features are presented