Implementing energy saving algorithms for Ethernet link aggregates with ONOS

During the last few years, there has been plenty of research for reducing energy consumption in telecommunication infrastructure. However, many of the proposals remain unim-plemented due to the lack of flexibility in legacy networks. In this paper we demonstrate how the software defined networking (SDN) capabilities of current networking equipment can be used to implement some of these energy saving algorithms. In particular, we developed an ONOS application to realize an energy-aware traffic scheduler to a bundle link made up of Energy Efficient Ethernet (EEE) links between two SDN switches. We show how our application is able to dynamically adapt to the traffic characteristics and save energy by concentrating the traffic on as few ports as possible. This way, unused ports remain in Low Power Idle (LPI) state most of the time, saving energy.Comment: 8 pages, 10 figure

Review of Path Selection Algorithms with Link Quality and Critical Switch Aware for Heterogeneous Traffic in SDN

Software Defined Networking (SDN) introduced network management flexibility that eludes traditional network architecture. Nevertheless, the pervasive demand for various cloud computing services with different levels of Quality of Service requirements in our contemporary world made network service provisioning challenging. One of these challenges is path selection (PS) for routing heterogeneous traffic with end-to-end quality of service support specific to each traffic class. The challenge had gotten the research community\u27s attention to the extent that many PSAs were proposed. However, a gap still exists that calls for further study. This paper reviews the existing PSA and the Baseline Shortest Path Algorithms (BSPA) upon which many relevant PSA(s) are built to help identify these gaps. The paper categorizes the PSAs into four, based on their path selection criteria, (1) PSAs that use static or dynamic link quality to guide PSD, (2) PSAs that consider the criticality of switch in terms of an update operation, FlowTable limitation or port capacity to guide PSD, (3) PSAs that consider flow variabilities to guide PSD and (4) The PSAs that use ML optimization in their PSD. We then reviewed and compared the techniques\u27 design in each category against the identified SDN PSA design objectives, solution approach, BSPA, and validation approaches. Finally, the paper recommends directions for further research

Modeling Residential Energy Consumption:An application of IT-based solutions and big data analytics for sustainability

Smart meters that allow information to flow between users and utility service providers are expected to foster intelligent energy consumption. Previous studies focusing on demand-side management have been predominantly restricted to factors that utilities can manage and manipulate, but have ignored factors specific to residential characteristics. They also often presume that households consume similar amounts of energy and electricity. To fill these gaps in literature, the authors investigate two research questions: (RQ1) Does a data mining approach outperform traditional statistical approaches for modelling residential energy consumption? (RQ2) What factors influence household energy consumption? They identify household clusters to explore the underlying factors central to understanding electricity consumption behavior. Different clusters carry specific contextual nuances needed for fully understanding consumption behavior. The findings indicate electricity can be distributed according to the needs of six distinct clusters and that utilities can use analytics to identify load profiles for greater energy efficiency

Energy-aware routing techniques for software-defined networks

Achieving energy efficiency has recently become a key topic of networking research due to the ever-increasing power consumption and CO2 emissions generated by large data networks. This problem is becoming even more concerning and challenging given the drastic traffic increase expected over the next few years. However, the use of efficient energy-aware strategies could overturn this situation reducing the electricity consumption of Internet data transmission networks, as well as contributing to mitigate the environmental impact of other sectors. The existence of redundant network elements with high capacities is a common design practice in current network infrastructures in order to face suddenly failures or peak traffic flows. However, these additional resources remain either unused or barely used most of the time leading to an undesired energy waste. Therefore, putting into sleep mode (i.e. a low-power state) unused elements is an effective and widely-accepted strategy to decrease the consumption of data networks. In this context, SDN can be seen as an attractive solution to achieve the long-awaited energy efficiency in current communications systems, since they allow a flexible programmability suitable for this problem. This doctoral thesis tackles the problem of optimizing the power consumption in SDN through the design of energy-aware routing techniques that minimize the number of network elements required to satisfy an incoming traffic load. Different from existing related works, we focus on optimizing energy consumption in SDN with in-band control traffic in order to close this important gap in the literature and provide solutions compatible with operational backbone networks. Complementing the general aim of improving the energy efficiency in SDN, this research is also intended to cover important related features such as network performance, QoS requirements and real-time operation. Accordingly, this study gives a general perspective about the use of energy efficient routing techniques, which cover integrated routing considerations for the data and control plane traffic in SDN. By using realistic input data, significant values of switched-off links and nodes are reached, which demonstrates the great opportunity for saving energy given by our proposals. The obtained results have also validated the intrinsic trade-off between environmental and performance concerns, considering several performance indicators. These findings confirm that energy-aware routing schemes should be designed considering specific traffic requirements and performance metric bounds. Moreover, it is shown that jointly considering QoS requirements and energy awareness is an effective approach to improve, not only the power consumption, but the performance on critical parameters such as control traffic delay and blocking rate. Similarly, the proposed dynamic traffic allocation with congestion-aware rerouting is able to handle demanding traffic arrival without degrading the performance of higher priority traffic. In general, our proposals are fine-grained, easy to implement and quite balanced and effective in their results looking for a suitable and readily deployment in real-world SDN scenarios. Therefore, the conducted research and contributions reported through this document not only add to what is known about the potential of energy-aware routing techniques, but also stand as a valuable solution on the road to a sustainable networking.L'assoliment de l'eficiència energètica s'ha convertit recentment en un tema clau de recerca de xarxes a causa dels creixents nivells de consum d'energia i emissions de CO2 generats per les xarxes de dades. Aquest problema es torna cada vegada més preocupant i desafiant, donat el dràstic augment del trànsit esperat en els propers anys. No obstant això, l'ús d'estratègies energètiques eficients podria invertir aquesta situació, reduint el consum d'electricitat de les xarxes de dades d'Internet i contribuint a mitigar l'impacte ambiental d'altres sectors. L'existència d'elements de xarxa redundants i amb grans capacitats és una pràctica de disseny habitual en les infraestructures de xarxes actuals per afrontar fallades sobtades o fluxos de trànsit més elevats. Tanmateix, aquests recursos addicionals romanen poc o gens utilitzats la major part del temps, generant un desaprofitament d'energia no desitjat. Per tant, posar en mode de repòs (és a dir, un estat de baixa potència) elements no utilitzats és una estratègia efectiva i àmpliament acceptada per disminuir el consum en xarxes de dades. En aquest context, les xarxes definides per programari (SDN) es poden considerar una solució atractiva per aconseguir l'esperada eficiència energètica en els sistemes de comunicacions actuals, ja que permeten una flexible programabilitat idònia per a aquest problema. Aquesta tesi doctoral aborda el problema d'optimitzar el consum d'energia en SDN a través del disseny de tècniques d'encaminament conscients de l'energia que minimitzen la quantitat d'elements de xarxa necessaris per satisfer una càrrega de trànsit entrant. Diferent dels treballs existents, aquesta tesi es centra a optimitzar el consum d'energia en SDN amb el control de tràfic dins de banda per tancar aquesta important bretxa en la literatura i proporcionar solucions compatibles amb xarxes troncals operatives. Complementant l'objectiu general de millorar l'eficiència energètica en SDN, aquesta recerca també pretén cobrir altres importants paràmetres relacionats, com ara el rendiment de la xarxa, els requisits de qualitat de servei (QoS) i el funcionament en temps real. En conseqüència, aquest estudi ofereix una perspectiva general sobre l'ús de tècniques d'encaminament eficients energèticament, que contempla consideracions integrades per al tràfic de dades i del pla de control en SDN. Prenent dades d'entrada realistes, es van aconseguir desconnectar significatives quantitats d'enllaços i nodes, la qual cosa demostra la gran oportunitat d'estalvi d'energia que ofereixen les nostres propostes. Els resultats obtinguts també validen el estret compromís entre les preocupacions ambientals i les qüestions de rendiment de la xarxa, considerant diversos indicadors de rendiment. Aquests resultats confirmen que els esquemes d'encaminament conscients de l'energia s'han de dissenyar tenint en compte els requisits de tràfic específics i els límits desitjats de les mètriques de rendiment. A més, es demostra que, considerant conjuntament els requisits de QoS i de l'energia necessària, és un enfocament eficaç per millorar, no només el consum d'energia, sinó també el rendiment en paràmetres crítics, com la latència del tràfic de control i la probabilitat de bloqueig. De manera semblant, l'assignació dinàmica de tràfic proposta, amb re-encaminament conscient de la congestió, permet gestionar grans volums de trànsit sense degradar el rendiment de les demandes de major prioritat. En general, les nostres propostes són precises, fàcils d'implementar i bastant equilibrades i efectives en els seus resultats, buscant un desplegament adequat i fàcil en escenaris pràctics de SDN. Per tant, la recerca realitzada i les contribucions contingudes en aquest document no només afegeixen el que es coneix sobre el potencial de les tècniques d'encaminament conscients de l'energia, sinó que també representen una valuosa solució en el camí cap a una xarxa sostenibl

Coretic : nouvelle écriture des règles pour améliorer l'isolation et la composition en SDN

SDN (Software Defined Networking) est une nouvelle architecture réseau qui permet d’apporter une solution à la complexité des tâches des équipements réseaux. Cette architecture permet de séparer le plan de données, chargé d’acheminer les données, du plan de contrôle qui fournit les règles de gestion des flux. Au-dessus du plan de contrôle, s’ajoute le plan de gestion qui permet d’envoyer des instructions au plan de données en utilisant un langage évolué. Les travaux de recherche apportent des solutions pour permettre l’isolation des trafics, la composition des plans de contrôle et pour la gestion des flux au niveau du plan de gestion en SDN. Les solutions actuelles d’isolation et de composition présentent des techniques de gestion des entrées de flux ayant des faiblesses. Certaines utilisent des informations de la couche 2 du modèle OSI (Open System Interconnection) (Ahmed, Mohamed Fekih. 2015). Effectuer l’isolation en se servant des informations de la couche 2 entraîne une génération de plusieurs entrées dans les tables de flux, ce qui affecte les performances. D’autres solutions utilisent une seule table de flux pour insérer les règles de plusieurs contrôleurs (Jin, Xin. 2015). Ceci entraîne une cohésion faible des tables concernées. Un couplage élevé est aussi constaté par l’utilisation de plusieurs tables reliées entre elles (Dixit, A. 2014). Quant aux solutions au niveau du plan de gestion, elles ne permettent pas à plusieurs plateformes de programmation de haut niveau d’utiliser un contrôleur commun. Dans ce travail de maîtrise, il est proposé Coretic qui vise à améliorer l’écriture des règles dans le plan de données pour l’isolation et la composition. Étant donné que le rôle du plan de contrôle est confié au plan de gestion utilisant les plateformes de programmation de haut niveau, ce travail propose une solution permettant d’isoler le trafic des plans de gestion en utilisant un contrôleur commun. Coretic pour atteindre ses objectifs se sert des informations de la couche 3 du modèle OSI et de plusieurs tables de flux. Des tests de performance ont permis de montrer que Coretic offre de meilleures performances dans l’isolation et la composition. La solution d’hypervision des plans de gestions ne crée pas une degradation importante des performances. Coretic à la suite des tests effectués apporte les contributions suivantes : • Apport d’une nouvelle approche d’isolation et de composition de plans de contrôles basée sur l’utilisation de tables multiples et de l’utilisation d’adresses IP de la couche 3. • Apport d’une solution d’hypervision des plans de gestion. Ces contributions permettent d’améliorer les performances dans le plan de données. La cohésion des tables de flux est renforcée, car ces tables reçoivent chacune des politiques bien précises. Le couplage devient faible aussi, car Coretic laisse les tables traiter les flux en toute indépendance. Avec Coretic, il est possible d’utiliser qu’un seul contrôleur pour isoler le traffic de plusieurs plans de gestion

Energy-aware routing techniques for software-defined networks

Achieving energy efficiency has recently become a key topic of networking research due to the ever-increasing power consumption and CO2 emissions generated by large data networks. This problem is becoming even more concerning and challenging given the drastic traffic increase expected over the next few years. However, the use of efficient energy-aware strategies could overturn this situation reducing the electricity consumption of Internet data transmission networks, as well as contributing to mitigate the environmental impact of other sectors. The existence of redundant network elements with high capacities is a common design practice in current network infrastructures in order to face suddenly failures or peak traffic flows. However, these additional resources remain either unused or barely used most of the time leading to an undesired energy waste. Therefore, putting into sleep mode (i.e. a low-power state) unused elements is an effective and widely-accepted strategy to decrease the consumption of data networks. In this context, SDN can be seen as an attractive solution to achieve the long-awaited energy efficiency in current communications systems, since they allow a flexible programmability suitable for this problem. This doctoral thesis tackles the problem of optimizing the power consumption in SDN through the design of energy-aware routing techniques that minimize the number of network elements required to satisfy an incoming traffic load. Different from existing related works, we focus on optimizing energy consumption in SDN with in-band control traffic in order to close this important gap in the literature and provide solutions compatible with operational backbone networks. Complementing the general aim of improving the energy efficiency in SDN, this research is also intended to cover important related features such as network performance, QoS requirements and real-time operation. Accordingly, this study gives a general perspective about the use of energy efficient routing techniques, which cover integrated routing considerations for the data and control plane traffic in SDN. By using realistic input data, significant values of switched-off links and nodes are reached, which demonstrates the great opportunity for saving energy given by our proposals. The obtained results have also validated the intrinsic trade-off between environmental and performance concerns, considering several performance indicators. These findings confirm that energy-aware routing schemes should be designed considering specific traffic requirements and performance metric bounds. Moreover, it is shown that jointly considering QoS requirements and energy awareness is an effective approach to improve, not only the power consumption, but the performance on critical parameters such as control traffic delay and blocking rate. Similarly, the proposed dynamic traffic allocation with congestion-aware rerouting is able to handle demanding traffic arrival without degrading the performance of higher priority traffic. In general, our proposals are fine-grained, easy to implement and quite balanced and effective in their results looking for a suitable and readily deployment in real-world SDN scenarios. Therefore, the conducted research and contributions reported through this document not only add to what is known about the potential of energy-aware routing techniques, but also stand as a valuable solution on the road to a sustainable networking.L'assoliment de l'eficiència energètica s'ha convertit recentment en un tema clau de recerca de xarxes a causa dels creixents nivells de consum d'energia i emissions de CO2 generats per les xarxes de dades. Aquest problema es torna cada vegada més preocupant i desafiant, donat el dràstic augment del trànsit esperat en els propers anys. No obstant això, l'ús d'estratègies energètiques eficients podria invertir aquesta situació, reduint el consum d'electricitat de les xarxes de dades d'Internet i contribuint a mitigar l'impacte ambiental d'altres sectors. L'existència d'elements de xarxa redundants i amb grans capacitats és una pràctica de disseny habitual en les infraestructures de xarxes actuals per afrontar fallades sobtades o fluxos de trànsit més elevats. Tanmateix, aquests recursos addicionals romanen poc o gens utilitzats la major part del temps, generant un desaprofitament d'energia no desitjat. Per tant, posar en mode de repòs (és a dir, un estat de baixa potència) elements no utilitzats és una estratègia efectiva i àmpliament acceptada per disminuir el consum en xarxes de dades. En aquest context, les xarxes definides per programari (SDN) es poden considerar una solució atractiva per aconseguir l'esperada eficiència energètica en els sistemes de comunicacions actuals, ja que permeten una flexible programabilitat idònia per a aquest problema. Aquesta tesi doctoral aborda el problema d'optimitzar el consum d'energia en SDN a través del disseny de tècniques d'encaminament conscients de l'energia que minimitzen la quantitat d'elements de xarxa necessaris per satisfer una càrrega de trànsit entrant. Diferent dels treballs existents, aquesta tesi es centra a optimitzar el consum d'energia en SDN amb el control de tràfic dins de banda per tancar aquesta important bretxa en la literatura i proporcionar solucions compatibles amb xarxes troncals operatives. Complementant l'objectiu general de millorar l'eficiència energètica en SDN, aquesta recerca també pretén cobrir altres importants paràmetres relacionats, com ara el rendiment de la xarxa, els requisits de qualitat de servei (QoS) i el funcionament en temps real. En conseqüència, aquest estudi ofereix una perspectiva general sobre l'ús de tècniques d'encaminament eficients energèticament, que contempla consideracions integrades per al tràfic de dades i del pla de control en SDN. Prenent dades d'entrada realistes, es van aconseguir desconnectar significatives quantitats d'enllaços i nodes, la qual cosa demostra la gran oportunitat d'estalvi d'energia que ofereixen les nostres propostes. Els resultats obtinguts també validen el estret compromís entre les preocupacions ambientals i les qüestions de rendiment de la xarxa, considerant diversos indicadors de rendiment. Aquests resultats confirmen que els esquemes d'encaminament conscients de l'energia s'han de dissenyar tenint en compte els requisits de tràfic específics i els límits desitjats de les mètriques de rendiment. A més, es demostra que, considerant conjuntament els requisits de QoS i de l'energia necessària, és un enfocament eficaç per millorar, no només el consum d'energia, sinó també el rendiment en paràmetres crítics, com la latència del tràfic de control i la probabilitat de bloqueig. De manera semblant, l'assignació dinàmica de tràfic proposta, amb re-encaminament conscient de la congestió, permet gestionar grans volums de trànsit sense degradar el rendiment de les demandes de major prioritat. En general, les nostres propostes són precises, fàcils d'implementar i bastant equilibrades i efectives en els seus resultats, buscant un desplegament adequat i fàcil en escenaris pràctics de SDN. Per tant, la recerca realitzada i les contribucions contingudes en aquest document no només afegeixen el que es coneix sobre el potencial de les tècniques d'encaminament conscients de l'energia, sinó que també representen una valuosa solució en el camí cap a una xarxa sosteniblePostprint (published version

A survey on energy efficiency in software defined networks

Wide deployment and dense usage of computer networks may cause excessive energy consumption due to the increase in probability of network congestion, frame collisions and packet dropping rates resulting from late-received frames. Besides, based on the dramatic increase in network complexity with wireless, mobile and split tunnel connections, weak visibility into network flows and high cost of some of public and private network services, current networks can also be implied as inefficient in terms of both performance and economy. Software-Defined Networking (SDN) is a novel networking architecture, which provides a directly programmable and (logically) centralized network control, separates network control from forwarding, and enables programmable network components. SDN can have a significant role in reducing the aforementioned excessive energy consumption caused by data centers, network components, and end hosts. In this paper,1 we examine the principles, benefits, and drawbacks of up-to-date SDN approaches that focus on energy efficiency. We also provide a brief comparison of possible energy gain ratios of existing approaches, discussion on open issues and a guideline for future research