Controlo de congestionamento em redes sem fios

Doutoramento em Engenharia ElectrotécnicaCongestion control in wireless networks is an important and open issue. Previous research has proven the poor performance of the Transport Control Protocol (TCP) in such networks. The factors that contribute to the poor performance of TCP in wireless environments concern its unsuitability to identify/detect and react properly to network events, its TCP window based ow control algorithm that is not suitable for the wireless channel, and the congestion collapse due to mobility. New rate based mechanisms have been proposed to mitigate TCP performance in wired and wireless networks. However, these mechanisms also present poor performance, as they lack of suitable bandwidth estimation techniques for multi-hop wireless networks. It is thus important to improve congestion control performance in wireless networks, incorporating components that are suitable for wireless environments. A congestion control scheme which provides an e - cient and fair sharing of the underlying network capacity and available bandwidth among multiple competing applications is crucial to the definition of new e cient and fair congestion control schemes on wireless multi-hop networks. The Thesis is divided in three parts. First, we present a performance evaluation study of several congestion control protocols against TCP, in wireless mesh and ad-hoc networks. The obtained results show that rate based congestion control protocols need an eficient and accurate underlying available bandwidth estimation technique. The second part of the Thesis presents a new link capacity and available bandwidth estimation mechanism denoted as rt-Winf (real time wireless inference). The estimation is performed in real-time and without the need to intrusively inject packets in the network. Simulation results show that rt-Winf obtains the available bandwidth and capacity estimation with accuracy and without introducing overhead trafic in the network. The third part of the Thesis proposes the development of new congestion control mechanisms to address the congestion control problems of wireless networks. These congestion control mechanisms use cross layer information, obtained by rt-Winf, to accurately and eficiently estimate the available bandwidth and the path capacity over a wireless network path. Evaluation of these new proposed mechanisms, through ns-2 simulations, shows that the cooperation between rt-Winf and the congestion control algorithms is able to significantly increase congestion control eficiency and network performance.O controlo de congestionamento continua a ser extremamente importante quando se investiga o desempenho das redes sem fios. Trabalhos anteriores mostram o mau desempenho do Transport Control Proto- col (TCP) em redes sem fios. Os fatores que contribuem para um pior desempenho do TCP nesse tipo de redes s~ao: a sua falta de capacidade para identificar/detetar e reagir adequadamente a eventos da rede; a utilização de um algoritmo de controlo de uxo que não é adequado para o canal sem fios; e o colapso de congestionamento devido á mobilidade. Para colmatar este problemas foram propostos novos mecanismos de controlo de congestionamento baseados na taxa de transmissão. No entanto, estes mecanismos também apresentam um pior desempenho em redes sem fios, já que não utilizam mecanismos adequados para a avaliação da largura de banda disponível. Assim, é importante para melhorar o desempenho do controlo de congestionamento em redes sem fios, incluir componentes que são adequados para esse tipo de ambientes. Um esquema de controlo de congestionamento que permita uma partilha eficiente e justa da capacidade da rede e da largura de banda disponível entre múltiplas aplicações concorrentes é crucial para a definição de novos, eficientes e justos mecanismos de controlo congestionamento para as redes sem fios. A Tese está dividida em três partes. Primeiro, apresentamos um estudo sobre a avaliação de desempenho de vários protocolos de controlo de congestionamento relativamente ao TCP, em redes sem fios em malha e ad-hoc. Os resultados obtidos mostram que os protocolos baseados na taxa de transmissão precisam de uma técnica de avaliação da largura de banda disponível que seja eficiente e precisa . A segunda parte da Tese apresenta um novo mecanismo de avaliação da capacidade da ligação e da largura de banda disponível, designada por rt-Winf (real time wireless inference). A avaliação é realizada em tempo real e sem a necessidade de inserir tráfego na rede. Os resultados obtidos através de simulação e emulação mostram que o rt-Winf obtém com precisão a largura de banda disponível e a capacidade da ligação sem sobrecarregar a rede. A terceira parte da Tese propõe novos mecanismos de controlo de congestionamento em redes sem fios. Estes mecanismos de controlo de congestionamento apresentam um conjunto de caracter ísticas novas para melhorar o seu desempenho, de entre as quais se destaca a utilização da informação de largura de banda disponível obtida pelo rt-Winf. Os resultados da avaliação destes mecanismos, utilizando o simulador ns-2, permitem concluir que a cooperação entre o rt-Winf e os algoritmos de controlo de congestionamento aumenta significativamente o desempenho da rede

An Efficient Framework of Congestion Control for Next-Generation Networks

The success of the Internet can partly be attributed to the congestion control algorithm in the Transmission Control Protocol (TCP). However, with the tremendous increase in the diversity of networked systems and applications, TCP performance limitations are becoming increasingly problematic and the need for new transport protocol designs has become increasingly important.Prior research has focused on the design of either end-to-end protocols (e.g., CUBIC) that rely on implicit congestion signals such as loss and/or delay or network-based protocols (e.g., XCP) that use precise per-flow feedback from the network. While the former category of schemes haveperformance limitations, the latter are hard to deploy, can introduce high per-packet overhead, and open up new security challenges. This dissertation explores the middle ground between these designs and makes four contributions. First, we study the interplay between performance and feedback in congestion control protocols. We argue that congestion feedback in the form of aggregate load can provide the richness needed to meet the challenges of next-generation networks and applications. Second, we present the design, analysis, and evaluation of an efficient framework for congestion control called Binary Marking Congestion Control (BMCC). BMCC uses aggregate load feedback to achieve efficient and fair bandwidth allocations on high bandwidth-delaynetworks while minimizing packet loss rates and average queue length. BMCC reduces flow completiontimes by up to 4x over TCP and uses only the existing Explicit Congestion Notification bits.Next, we consider the incremental deployment of BMCC. We study the bandwidth sharing properties of BMCC and TCP over different partial deployment scenarios. We then present algorithms for ensuring safe co-existence of BMCC and TCP on the Internet. Finally, we consider the performance of BMCC over Wireless LANs. We show that the time-varying nature of the capacity of a WLAN can lead to significant performance issues for protocols that require capacity estimates for feedback computation. Using a simple model we characterize the capacity of a WLAN and propose the usage of the average service rate experienced by network layer packets as an estimate for capacity. Through extensive evaluation, we show that the resulting estimates provide good performance

Explicit congestion control algorithms for time-varying capacity media

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 200

Performance Analysis of Multiple Access Techniques for LTE system under Symbol Error Rate (SER) Calculation

In the recent years, so many technologies in multiple access trends have influenced the field of Wireless Sensor Networks in significant ways. Various trends are readily available technology of ubiquitous wireless sensor networks as well as wireless communication networks and progress in the development of two multiple access techniques are compared in this scenario: the OFDMA and SC-FDMA. The OFDMA and SC-FDMA transceivers are modeled and simulated considering both the interleaved and localized subcarriers mapping schemes. WSNs have the potentiality to connect the physical world with the virtual world by forming a network of sensor nodes. To prolong the networklsquo;s hop in terms of single and two hop using both techniques should be used in the sensor nodes. The minimization of computing and storage platforms as well as the development of novel micro sensors and sensor materials with high reliability force encourages technology in research on WSN. In this paper, we will proposed the field of multipath routing in wireless sensor networks, and mainly focus on the technology of SER of WSNs

WE TCP-AP: Wireless Enhanced TCP-AP

Congestion control in wireless networks is strongly dependent on the dynamics and instability of wireless links. It is known that TCP experiences serious performance degradation problems in wireless networks. New approaches based on TCP try to overcome these problems but, although their performance is increased, they incur in congestion control errors, since they do not evaluate accurately the capacity and available link bandwidth in wireless networks. This is also the case of TCP-AP (Adaptive Pacing) that, although presenting clear advantages in wireless networks when compared to other TCP-based approaches, its performance is still lower than rate-based approaches. In this paper we propose a new congestion control protocol based in TCP-AP, the Wireless Enhanced TCP-AP (WE TCPAP).This protocol relies on the MAC layer information gathere by a new method to accurately estimate the available bandwidth and the path capacity over a wireless network path. The new congestion control mechanism is evaluated in different scenarios in wireless mesh and ad-hoc networks, and compared against several approaches for wireless congestion control. It is shown that the new WE TCP-AP outperforms the base TCP-AP, with a more stable behavior and better channel utilization, and its performance gets close to the one of ratebased protocols. This is a very important result, as we show that TCP-based approaches are still able to have good performance in wireless mesh and ad-hoc networks

An Energy-conscious Transport Protocol for Multi-hop Wireless Networks

We present a transport protocol whose goal is to reduce power consumption without compromising delivery requirements of applications. To meet its goal of energy efficiency, our transport protocol (1) contains mechanisms to balance end-to-end vs. local retransmissions; (2) minimizes acknowledgment traffic using receiver regulated rate-based flow control combined with selected acknowledgements and in-network caching of packets; and (3) aggressively seeks to avoid any congestion-based packet loss. Within a recently developed ultra low-power multi-hop wireless network system, extensive simulations and experimental results demonstrate that our transport protocol meets its goal of preserving the energy efficiency of the underlying network.Defense Advanced Research Projects Agency (NBCHC050053

Utility of hybrid wireless experimentation for evaluation of heterogeneous wireless architectures and cross-layer protocols

We consider hybrid wireless experimentation, which has emerged as an alternative and complementary methodology to physical experimentation and simulation for wireless network evaluation. Specifically, our focus in this paper is on WHYNET, a flexible hybrid evaluation framework providing the capability to seamlessly integrate simulated, emulated and physical networks, thereby enabling several ways of realizing a given target wireless network scenario each using physical (operational) and simulated elements in different combinations depending on the evaluation needs and available testbed resources. Using two novel and detailed case studies of WHYNET, we demonstrate the utility of the hybrid approach for realistic, scalable and cost-effective evaluation of heterogeneous wireless network scenarios and cross-layer protocol mechanisms

Effective Node Clustering and Data Dissemination In Large-Scale Wireless Sensor Networks

The denseness and random distribution of large-scale WSNs makes it quite difficult to replace or recharge nodes. Energy efficiency and management is a major design goal in these networks. In addition, reliability and scalability are two other major goals that have been identified by researchers as necessary in order to further expand the deployment of such networks for their use in various applications. This thesis aims to provide an energy efficient and effective node clustering and data dissemination algorithm in large-scale wireless sensor networks. In the area of clustering, the proposed research prolongs the lifetime of the network by saving energy through the use of node ranking to elect cluster heads, contrary to other existing cluster-based work that selects a random node or the node with the highest energy at a particular time instance as the new cluster head. Moreover, a global knowledge strategy is used to maintain a level of universal awareness of existing nodes in the subject area and to avoid the problem of disconnected or forgotten nodes. In the area of data dissemination, the aim of this research is to effectively manage the data collection by developing an efficient data collection scheme using a ferry node and applying a selective duty cycle strategy to the sensor nodes. Depending on the application, mobile ferries can be used for collecting data in a WSN, especially those that are large in scale, with delay tolerant applications. Unlike data collection via multi-hop forwarding among the sensing nodes, ferries travel across the sensing field to collect data. A ferry-based approach thus eliminates, or minimizes, the need for the multi-hop forwarding of data, and as a result, energy consumption at the nodes will be significantly reduced. This is especially true for nodes that are near the base station as they are used by other nodes to forward data to the base station. MATLAB is used to design, simulate and evaluate the proposed work against the work that has already been done by others by using various performance criteria

Transport Architectures for an Evolving Internet

In the Internet architecture, transport protocols are the glue between an application’s needs and the network’s abilities. But as the Internet has evolved over the last 30 years, the implicit assumptions of these protocols have held less and less well. This can cause poor performance on newer networks—cellular networks, datacenters—and makes it challenging to roll out networking technologies that break markedly with the past. Working with collaborators at MIT, I have built two systems that explore an objective-driven, computer-generated approach to protocol design. My thesis is that making protocols a function of stated assumptions and objectives can improve application performance and free network technologies to evolve. Sprout, a transport protocol designed for videoconferencing over cellular networks, uses probabilistic inference to forecast network congestion in advance. On commercial cellular networks, Sprout gives 2-to-4 times the throughput and 7-to-9 times less delay than Skype, Apple Facetime, and Google Hangouts. This work led to Remy, a tool that programmatically generates protocols for an uncertain multi-agent network. Remy’s computer-generated algorithms can achieve higher performance and greater fairness than some sophisticated human-designed schemes, including ones that put intelligence inside the network. The Remy tool can then be used to probe the difficulty of the congestion control problem itself—how easy is it to “learn” a network protocol to achieve desired goals, given a necessarily imperfect model of the networks where it ultimately will be deployed? We found weak evidence of a tradeoff between the breadth of the operating range of a computer-generated protocol and its performance, but also that a single computer-generated protocol was able to outperform existing schemes over a thousand-fold range of link rates

CapEst: A Measurement-based Approach to Estimating Link Capacity in Wireless Networks

Estimating link capacity in a wireless network is a complex task because the available capacity at a link is a function of not only the current arrival rate at that link, but also of the arrival rate at links which interfere with that link as well as of the nature of interference between these links. Models which accurately characterize this dependence are either too computationally complex to be useful or lack accuracy. Further, they have a high implementation overhead and make restrictive assumptions, which makes them inapplicable to real networks. In this paper, we propose CapEst, a general, simple yet accurate, measurement-based approach to estimating link capacity in a wireless network. To be computationally light, CapEst allows inaccuracy in estimation; however, using measurements, it can correct this inaccuracy in an iterative fashion and converge to the correct estimate. Our evaluation shows that CapEst always converged to within 5% of the correct value in less than 18 iterations. CapEst is model-independent, hence, is applicable to any MAC/PHY layer and works with auto-rate adaptation. Moreover, it has a low implementation overhead, can be used with any application which requires an estimate of residual capacity on a wireless link and can be implemented completely at the network layer without any support from the underlying chipset