Comprehensive review on controller for leader-follower robotic system

985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies

Periodic event-triggered output regulation for linear multi-agent systems

This study considers the problem of periodic event-triggered (PET) cooperative output regulation for a class of linear multi-agent systems. The advantage of the PET output regulation is that the data transmission and triggered condition are only needed to be monitored at discrete sampling instants. It is assumed that only a small number of agents can have access to the system matrix and states of the leader. Meanwhile, the PET mechanism is considered not only in the communication between various agents, but also in the sensor-to-controller and controller-to-actuator transmission channels for each agent. The above problem set-up will bring some challenges to the controller design and stability analysis. Based on a novel PET distributed observer, a PET dynamic output feedback control method is developed for each follower. Compared with the existing works, our method can naturally exclude the Zeno behavior, and the inter-event time becomes multiples of the sampling period. Furthermore, for every follower, the minimum inter-event time can be determined \textit{a prior}, and computed directly without the knowledge of the leader information. An example is given to verify and illustrate the effectiveness of the new design scheme.Comment: 17 pages, 13 figures, submitted to Automatica. accepte

Intelligent Design for Real Time Networked Multi-Agent Systems

Past decade has witnessed an unprecedented growth in reasearch for Unmanned Aerial Vehicles (UAVs) both in military and nonmilitary fronts. They have become ubiquitous in almost every military operations which includes domestic and overseas missions. With rapidly advancing technology, open source nature of the flight controllers, and significantly lesser costs than before, companies around the world are delving into UAV market as one of the upcoming lucrative investments. Companies like Amazon Inc., Dominos Pizza Inc. have had some successful test runs which again solidifies the research opportunities. Delivery services and recreational uses seems to have increased in the past 3-4 years which has let the Federal Aviation Administration to update their rules and regulations. Mapping, Surveying and search/rescue mission are some of the applications of UAVs that are most appealing. Making these applications airborne cuts the time and cost at considerable and affordable levels. Using UAVs for operations has advantages in both response time and need of manpower compared to piloted aricrafts. Obtaining prior information of a person/people in distress can become a deciding factor for a successful mission. It can help in making critical decision as which location or type of helicopter / vehicle to be used for extraction, equipment to bring and how many crew members that are needed. The idea here is to make this system of UAVs automated to coordinate with each other without human intervention (other than high level commands like takeoff and land). Researchers and Military experts have recognized the use of drones for search and rescue missions to be of utmost importance. Year 2016 saw a first of its kind UAV search and rescue symposium held in Nevada. The objective was to give a platform for UAV enthusiasts and researchers and share their experiences and concerns while using UAVs as first responders. The biggest drawback of using an aerial vehicle for inspection/search/rescue mission is its airborne time. The batteries used are big and heavy which increases the weight and decreases the flight time. One can go about solving this issue by using a swarm of UAVs which would inspect/search a given area in less amount of time. This has advantage in both response time and need for lesser man power.The main challenges for Multiple Drone Control (MDC) includes 1) Address the periodic sampling frequency issue of information of assets so as to maintain stability; 2) Optimize the communication channel while providing minimum Quality of Service (QoS); 3) Optimal control strategy which includes non-linearity in state space model; 4) Optimal control in presence of uncertainties; 5) Admitting new agents for dynamic agents in the Networked Multi-Agent System (MAS) Scenario.This dissertation aims at building a hardware and a software platform for communication of multiple UAVs upon which additional control algorithms can be implementated. It starts with building a DJI S1000 octacopter from the ground up. The components used are specified in the following sections. The idea here is to make a drone that can autonomously travel to specified location with safety features like geofencing and land on emergency situations. The user has to provide the necessary commands like GPS locations and takeoff/land commands via a Radio Controller (RC) remote. At any point of the flight, the UAV should be able to receive new commands from the ground control stations (GCS). After successful implementation, the UAV would not be restricted to the range of RC remote. It would be able to travel greater distances given the GPS signal remains operational in the field. This is possible at a global scale with limitation of only the batteries and flight time

Optimized state feedback regulation of 3DOF helicopter system via extremum seeking

In this paper, an optimized state feedback regulation of a 3 degree of freedom (DOF) helicopter is designed via extremum seeking (ES) technique. Multi-parameter ES is applied to optimize the tracking performance via tuning State Vector Feedback with Integration of the Control Error (SVFBICE). Discrete multivariable version of ES is developed to minimize a cost function that measures the performance of the controller. The cost function is a function of the error between the actual and desired axis positions. The controller parameters are updated online as the optimization takes place. This method significantly decreases the time in obtaining optimal controller parameters. Simulations were conducted for the online optimization under both fixed and varying operating conditions. The results demonstrate the usefulness of using ES for preserving the maximum attainable performance

Fixed-time observer-based distributed secondary voltage and frequency control of islanded AC microgrids

This paper deals with the problem of voltage and frequency control of distributed generators (DGs) in AC islanded microgrids. The main motivation of this work is to obviate the shortcomings of conventional centralized and distributed control of micro-grids by providing a better alternative control strategy with better control performance than state-of-the art approaches. A distributed secondary control protocol based on a novel fixed-time observer-based feedback control method is designed for fixed-time frequency and voltage reference tracking and disturbance rejection. Compared to the existing secondary microgrid controllers, the proposed control strategy ensures frequency and voltage reference tracking and disturbance rejection before the desired fixed-time despite the microgrid initial conditions, parameters uncertainties and the unknown disturbances. Also, the controllers design and tuning is simple, straightfor-ward and model-free.i.e, the knowledge of the microgrid parameters, topology, loads or transmission lines impedance are not needed in the design procedure. The use of distributed control approach enhances the reliability of the system by making the control system geographically distributed along with the power sources, by using the neighboring DGs informations instead of the DG’s local informations only and by cooperatively rejecting external disturbances and maintaining the frequency and the voltage at their reference values at any point of the microgrid. The efficiency of the proposed approach is verified by comparing its performance in reference tracking and its robustness to load power variations to some of the works in literature that addressed distributed secondary voltage and frequency control

Distributed Control of Multi-agent Systems with Unknown Time-varying Gains: A Novel Indirect Framework for Prescribed Performance

In this paper, a new yet indirect performance guaranteed framework is established to address the distributed tracking control problem for networked uncertain nonlinear strict-feedback systems with unknown time-varying gains under a directed interaction topology. The proposed framework involves two steps: In the first one, a fully distributed robust filter is constructed to estimate the desired trajectory for each agent with guaranteed observation performance that allows the directions among the agents to be non-identical. In the second one, by establishing a novel lemma regarding Nussbaum function, a new adaptive control protocol is developed for each agent based on backstepping technique, which not only steers the output to asymptotically track the corresponding estimated signal with arbitrarily prescribed transient performance, but also largely extends the scope of application since the unknown control gains are allowed to be time-varying and even state-dependent. In such an indirect way, the underlying problem is tackled with the output tracking error converging into an arbitrarily pre-assigned residual set exhibiting an arbitrarily pre-defined convergence rate. Besides, all the internal signals are ensured to be semi-globally ultimately uniformly bounded (SGUUB). Finally, simulation results are provided to illustrate the effectiveness of the co-designed scheme

Distributed estimation techniques forcyber-physical systems

Nowadays, with the increasing use of wireless networks, embedded devices and agents with processing and sensing capabilities, the development of distributed estimation techniques has become vital to monitor important variables of the system that are not directly available. Numerous distributed estimation techniques have been proposed in the literature according to the model of the system, noises and disturbances. One of the main objectives of this thesis is to search all those works that deal with distributed estimation techniques applied to cyber-physical systems, system of systems and heterogeneous systems, through using systematic review methodology. Even though systematic reviews are not the common way to survey a topic in the control community, they provide a rigorous, robust and objective formula that should not be ignored. The presented systematic review incorporates and adapts the guidelines recommended in other disciplines to the field of automation and control and presents a brief description of the different phases that constitute a systematic review. Undertaking the systematic review many gaps were discovered: it deserves to be remarked that some estimators are not applied to cyber-physical systems, such as sliding mode observers or set-membership observers. Subsequently, one of these particular techniques was chosen, set-membership estimator, to develop new applications for cyber-physical systems. This introduces the other objectives of the thesis, i.e. to present two novel formulations of distributed set-membership estimators. Both estimators use a multi-hop decomposition, so the dynamics of the system is rewritten to present a cascaded implementation of the distributed set-membership observer, decoupling the influence of the non-observable modes to the observable ones. So each agent must find a different set for each sub-space, instead of a unique set for all the states. Two different approaches have been used to address the same problem, that is, to design a guaranteed distributed estimation method for linear full-coupled systems affected by bounded disturbances, to be implemented in a set of distributed agents that need to communicate and collaborate to achieve this goal

Resilience-oriented control and communication framework for cyber-physical microgrids

Climate change drives the energy supply transition from traditional fossil fuel-based power generation to renewable energy resources. This transition has been widely recognised as one of the most significant developing pathways promoting the decarbonisation process toward a zero-carbon and sustainable society. Rapidly developing renewables gradually dominate energy systems and promote the current energy supply system towards decentralisation and digitisation. The manifestation of decentralisation is at massive dispatchable energy resources, while the digitisation features strong cohesion and coherence between electrical power technologies and information and communication technologies (ICT). Massive dispatchable physical devices and cyber components are interdependent and coupled tightly as a cyber-physical energy supply system, while this cyber-physical energy supply system currently faces an increase of extreme weather (e.g., earthquake, flooding) and cyber-contingencies (e.g., cyberattacks) in the frequency, intensity, and duration. Hence, one major challenge is to find an appropriate cyber-physical solution to accommodate increasing renewables while enhancing power supply resilience. The main focus of this thesis is to blend centralised and decentralised frameworks to propose a collaboratively centralised-and-decentralised resilient control framework for energy systems i.e., networked microgrids (MGs) that can operate optimally in the normal condition while can mitigate simultaneous cyber-physical contingencies in the extreme condition. To achieve this, we investigate the concept of "cyber-physical resilience" including four phases, namely prevention/upgrade, resistance, adaption/mitigation, and recovery. Throughout these stages, we tackle different cyber-physical challenges under the concept of microgrid ranging from a centralised-to-decentralised transitional control framework coping with cyber-physical out of service, a cyber-resilient distributed control methodology for networked MGs, a UAV assisted post-contingency cyber-physical service restoration, to a fast-convergent distributed dynamic state estimation algorithm for a class of interconnected systems.Open Acces

Load frequency controllers considering renewable energy integration in power system

Abstract: Load frequency control or automatic generation control is one of the main operations that take place daily in a modern power system. The objectives of load frequency control are to maintain power balance between interconnected areas and to control the power flow in the tie-lines. Electric power cannot be stored in large quantity that is why its production must be equal to the consumption in each time. This equation constitutes the key for a good management of any power system and introduces the need of more controllers when taking into account the integration of renewable energy sources into the traditional power system. There are many controllers presented in the literature and this work reviews the traditional load frequency controllers and those, which combined the traditional controller and artificial intelligence algorithms for controlling the load frequency