The Design, modeling and simulation of switching fabrics: For an ATM network switch

The requirements of today\u27s telecommunication systems to support high bandwidth and added flexibility brought about the expansion of (Asynchronous Transfer Mode) ATM as a new method of high-speed data transmission. Various analytical and simulation methods may be used to estimate the performance of ATM switches. Analytical methods considerably limit the range of parameters to be evaluated due to extensive formulae used and time consuming iterations. They are not as effective for large networks because of excessive computations that do not scale linearly with network size. One the other hand, simulation-based methods allow determining a bigger range of performance parameters in a shorter amount of time even for large networks. A simulation model, however, is more elaborate in terms of implementation. Instead of using formulae to obtain results, it has to operate software or hardware modules requiring a certain amount of effort to create. In this work simulation is accomplished by utilizing the ATM library - an object oriented software tool, which uses software chips for building ATM switches. The distinguishing feature of this approach is cut-through routing realized on the bit level abstraction treating ATM protocol data units, called cells, as groups of 424 bits. The arrival events of cells to the system are not instantaneous contrary to commonly used methods of simulation that consider cells as instant messages. The simulation was run for basic multistage interconnection network types with varying source arrival rate and buffer sizes producing a set of graphs of cell delays, throughput, cell loss probability, and queue sizes. The techniques of rearranging and sorting were considered in the simulation. The results indicate that better performance is always achieved by bringing additional stages of elements to the switching system

Design and analysis of a scalable terabit multicast packet switch : architecture and scheduling algorithms

Internet growth and success not only open a primary route of information exchange for millions of people around the world, but also create unprecedented demand for core network capacity. Existing switches/routers, due to the bottleneck from either switch architecture or arbitration complexity, can reach a capacity on the order of gigabits per second, but few of them are scalable to large capacity of terabits per second. In this dissertation, we propose three novel switch architectures with cooperated scheduling algorithms to design a terabit backbone switch/router which is able to deliver large capacity, multicasting, and high performance along with Quality of Service (QoS). Our switch designs benefit from unique features of modular switch architecture and distributed resource allocation scheme. Switch I is a unique and modular design characterized by input and output link sharing. Link sharing resolves output contention and eliminates speedup requirement for central switch fabric. Hence, the switch architecture is scalable to any large size. We propose a distributed round robin (RR) scheduling algorithm which provides fairness and has very low arbitration complexity. Switch I can achieve good performance under uniform traffic. However, Switch I does not perform well for non-uniform traffic. Switch II, as a modified switch design, employs link sharing as well as a token ring to pursue a solution to overcome the drawback of Switch 1. We propose a round robin prioritized link reservation (RR+POLR) algorithm which results in an improved performance especially under non-uniform traffic. However, RR+POLR algorithm is not flexible enough to adapt to the input traffic. In Switch II, the link reservation rate has a great impact on switch performance. Finally, Switch III is proposed as an enhanced switch design using link sharing and dual round robin rings. Packet forwarding is based on link reservation. We propose a queue occupancy based dynamic link reservation (QOBDLR) algorithm which can adapt to the input traffic to provide a fast and fair link resource allocation. QOBDLR algorithm is a distributed resource allocation scheme in the sense that dynamic link reservation is carried out according to local available information. Arbitration complexity is very low. Compared to the output queued (OQ) switch which is known to offer the best performance under any traffic pattern, Switch III not only achieves performance as good as the OQ switch, but also overcomes speedup problem which seriously limits the OQ switch to be a scalable switch design. Hence, Switch III would be a good choice for high performance, scalable, large-capacity core switches

System architecture and hardware implementations for a reconfigurable MPLS router

With extremely wide bandwidth and good channel properties, optical fibers have brought fast and reliable data transmission to today’s data communications. However, to handle heavy traffic flowing through optical physical links, much faster processing speed is required or else congestion can take place at network nodes. Also, to provide people with voice, data and all categories of multimedia services, distinguishing between different data flows is a requirement. To address these router performance, Quality of Service /Class of Service and traffic engineering issues, Multi-Protocol Label Switching (MPLS) was proposed for IP-based Internetworks. In addition, routers flexible in hardware architecture in order to support ever-evolving protocols and services without causing big infrastructure modification or replacement are also desirable. Therefore, reconfigurable hardware implementation of MPLS was proposed in this project to obtain the overall fast processing speed at network nodes. The long-term goal of this project is to develop a reconfigurable MPLS router, which uniquely integrates the best features of operations being conducted in software and in run-time-reconfigurable hardware. The scope of this thesis includes system architecture and service algorithm considerations, Verilog coding and testing for an actual device. The hardware and software co-design technique was used to partition and schedule the protocol code for execution on both a general-purpose processor and stream-based hardware. A novel RPS scheme that is practically easy to build and can realize pipelined packet-by-packet data transfer at each output was proposed to take the place of the traditional crossbar switching. In RPS, packets with variable lengths can be switched intelligently without performing packet segmentation and reassembly. Primary theoretical analysis of queuing issues was discussed and an improved multiple queue service scheduling policy UD-WRR was proposed, which can reduce packet-waiting time without sacrificing the performance. In order to have the tests carried out appropriately, dedicated circuitry for the MPLS functional block to interface a specific MAC chip was implemented as well. The hardware designs for all functions were realized with a single Field Programmable Gate Array (FPGA) device in this project. The main result presented in this thesis was the MPLS function implementation realizing a major part of layer three routing at the reconfigurable hardware level, which advanced a great step towards the goal of building a router that is both fast and flexible

A Survey on the Contributions of Software-Defined Networking to Traffic Engineering

Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567 Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-

Computing infrastructure issues in distributed communications systems : a survey of operating system transport system architectures

The performance of distributed applications (such as file transfer, remote login, tele-conferencing, full-motion video, and scientific visualization) is influenced by several factors that interact in complex ways. In particular, application performance is significantly affected both by communication infrastructure factors and computing infrastructure factors. Several communication infrastructure factors include channel speed, bit-error rate, and congestion at intermediate switching nodes. Computing infrastructure factors include (among other things) both protocol processing activities (such as connection management, flow control, error detection, and retransmission) and general operating system factors (such as memory latency, CPU speed, interrupt and context switching overhead, process architecture, and message buffering). Due to a several orders of magnitude increase in network channel speed and an increase in application diversity, performance bottlenecks are shifting from the network factors to the transport system factors.This paper defines an abstraction called an "Operating System Transport System Architecture" (OSTSA) that is used to classify the major components and services in the computing infrastructure. End-to-end network protocols such as TCP, TP4, VMTP, XTP, and Delta-t typically run on general-purpose computers, where they utilize various operating system resources such as processors, virtual memory, and network controllers. The OSTSA provides services that integrate these resources to support distributed applications running on local and wide area networks.A taxonomy is presented to evaluate OSTSAs in terms of their support for protocol processing activities. We use this taxonomy to compare and contrast five general-purpose commercial and experimental operating systems including System V UNIX, BSD UNIX, the x-kernel, Choices, and Xinu

A high-speed, scalable, and programmable traffic manager architecture for flow-based networking

In this paper, we present a programmable and scalable traffic manager (TM) architecture, targeting requirements of high-speed networking devices, especially in the software-defined networking context. This TM is intended to ease the deployability of new architectures through field-programmable gate array (FPGA) platforms and to make the data plane programmable and scalable. Flow-based networking allows treating traffic in terms of flows rather than as a simple aggregation of individual packets, which simplifies scheduling and bandwidth allocation for each flow. Programmability brings agility, flexibility, and rapid adaptation to changes, allowing to meet network requirements in real-time. Traffic management with fast queuing and reduced latency plays an important role to support the upcoming 5G cellular communication technology. The proposed TM architecture is coded in C++ and is synthesized with the Vivado High-Level Synthesis tool. This TM is capable of supporting links operating beyond 40 Gb/s, on the ZC706 board and XCVU440-FLGB2377-3-E FPGA device from Xilinx, while achieving 80 Gb/s and 100 Gb/s throughput, respectively. The resulting placed and routed design was tested on the ZC706 board with its embedded ARM processor controlling table updates

Efficient Q. S support for higt-performance interconnects

Las redes de interconexión son un componente clave en un gran número de sistemas. Los mecanismos de calidad de servicio (qos) son responsables de asegurar que se alcanza un cierto rendimiento en la red. Las soluciones tradicionales para ofrecer qos en redes de interconexión de altas prestaciones normalmente se basan en arquitecturas complejas. El principal objetivo de esta tesis es investigar si podemos ofrecer mecanismos eficientes de qos. Nuestro propósito es alcanzar un soporte completo de qos con el mínimo de recursos. Para ello, se identifican redundancias en los mecanismos propuestos de qos y son eliminados sin afectar al rendimiento. Esta tesis consta de tres partes. En la primera comenzamos con las propuestas tradicionales de qos a nivel de clase de tráfico. En la segunda parte, proponemos como adaptar los mecanismos de qos basados en deadlines para redes de interconexión de altas prestaciones. Por último, también investigamos la interacción de los mecanismos de qos con el control de congestión

Multistage Packet-Switching Fabrics for Data Center Networks

Recent applications have imposed stringent requirements within the Data Center Network (DCN) switches in terms of scalability, throughput and latency. In this thesis, the architectural design of the packet-switches is tackled in different ways to enable the expansion in both the number of connected endpoints and traffic volume. A cost-effective Clos-network switch with partially buffered units is proposed and two packet scheduling algorithms are described. The first algorithm adopts many simple and distributed arbiters, while the second approach relies on a central arbiter to guarantee an ordered packet delivery. For an improved scalability, the Clos switch is build using a Network-on-Chip (NoC) fabric instead of the common crossbar units. The Clos-UDN architecture made with Input-Queued (IQ) Uni-Directional NoC modules (UDNs) simplifies the input line cards and obviates the need for the costly Virtual Output Queues (VOQs). It also avoids the need for complex, and synchronized scheduling processes, and offers speedup, load balancing, and good path diversity. Under skewed traffic, a reliable micro load-balancing contributes to boosting the overall network performance. Taking advantage of the NoC paradigm, a wrapped-around multistage switch with fully interconnected Central Modules (CMs) is proposed. The architecture operates with a congestion-aware routing algorithm that proactively distributes the traffic load across the switching modules, and enhances the switch performance under critical packet arrivals. The implementation of small on-chip buffers has been made perfectly feasible using the current technology. This motivated the implementation of a large switching architecture with an Output-Queued (OQ) NoC fabric. The design merges assets of the output queuing, and NoCs to provide high throughput, and smooth latency variations. An approximate analytical model of the switch performance is also proposed. To further exploit the potential of the NoC fabrics and their modularity features, a high capacity Clos switch with Multi-Directional NoC (MDN) modules is presented. The Clos-MDN switching architecture exhibits a more compact layout than the Clos-UDN switch. It scales better and faster in port count and traffic load. Results achieved in this thesis demonstrate the high performance, expandability and programmability features of the proposed packet-switches which makes them promising candidates for the next-generation data center networking infrastructure