Mengenal pasti tahap pengetahuan pelajar tahun akhir Ijazah Sarjana Muda Kejuruteraan di KUiTTHO dalam bidang keusahawanan dari aspek pengurusan modal

Malaysia ialah sebuah negara membangun di dunia. Dalam proses pembangunan ini, hasrat negara untuk melahirkan bakal usahawan beijaya tidak boleh dipandang ringan. Oleh itu, pengetahuan dalam bidang keusahawanan perlu diberi perhatian dengan sewajarnya; antara aspek utama dalam keusahawanan ialah modal. Pengurusan modal yang tidak cekap menjadi punca utama kegagalan usahawan. Menyedari hakikat ini, kajian berkaitan Pengurusan Modal dijalankan ke atas 100 orang pelajar Tahun Akhir Kejuruteraan di KUiTTHO. Sampel ini dipilih kerana pelajar-pelajar ini akan menempuhi alam pekeijaan di mana mereka boleh memilih keusahawanan sebagai satu keijaya. Walau pun mereka bukanlah pelajar dari jurusan perniagaan, namun mereka mempunyai kemahiran dalam mereka cipta produk yang boleh dikomersialkan. Hasil dapatan kajian membuktikan bahawa pelajar-pelajar ini berminat dalam bidang keusahawanan namun masih kurang pengetahuan tentang pengurusan modal terutamanya dalam menentukan modal permulaan, pengurusan modal keija dan caracara menentukan pembiayaan kewangan menggunakan kaedah jualan harian. Oleh itu, satu garis panduan Pengurusan Modal dibina untuk memberi pendedahan kepada mereka

Exploiting the GPU power for intensive geometric and imaging data computation.

Wang Jianqing.Thesis (M.Phil.)--Chinese University of Hong Kong, 2004.Includes bibliographical references (leaves 81-86).Abstracts in English and Chinese.Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Overview --- p.1Chapter 1.2 --- Thesis --- p.3Chapter 1.3 --- Contributions --- p.4Chapter 1.4 --- Organization --- p.6Chapter 2 --- Programmable Graphics Hardware --- p.8Chapter 2.1 --- Introduction --- p.8Chapter 2.2 --- Why Use GPU? --- p.9Chapter 2.3 --- Programmable Graphics Hardware Architecture --- p.11Chapter 2.4 --- Previous Work on GPU Computation --- p.15Chapter 3 --- Multilingual Virtual Performer --- p.17Chapter 3.1 --- Overview --- p.17Chapter 3.2 --- Previous Work --- p.18Chapter 3.3 --- System Overview --- p.20Chapter 3.4 --- Facial Animation --- p.22Chapter 3.4.1 --- Facial Animation using Face Space --- p.23Chapter 3.4.2 --- Face Set Selection for Lip Synchronization --- p.27Chapter 3.4.3 --- The Blending Weight Function Generation and Coartic- ulation --- p.33Chapter 3.4.4 --- Expression Overlay --- p.38Chapter 3.4.5 --- GPU Algorithm --- p.39Chapter 3.5 --- Character Animation --- p.44Chapter 3.5.1 --- Skeletal Animation Primer --- p.44Chapter 3.5.2 --- Mathematics of Kinematics --- p.46Chapter 3.5.3 --- Animating with Motion Capture Data --- p.48Chapter 3.5.4 --- Skeletal Subspace Deformation --- p.49Chapter 3.5.5 --- GPU Algorithm --- p.50Chapter 3.6 --- Integration of Skeletal and Facial Animation --- p.52Chapter 3.7 --- Result --- p.53Chapter 3.7.1 --- Summary --- p.58Chapter 4 --- Discrete Wavelet Transform On GPU --- p.60Chapter 4.1 --- Introduction --- p.60Chapter 4.1.1 --- Previous Works --- p.61Chapter 4.1.2 --- Our Solution --- p.61Chapter 4.2 --- Multiresolution Analysis with Wavelets --- p.62Chapter 4.3 --- Fragment Processor for Pixel Processing --- p.64Chapter 4.4 --- DWT Pipeline --- p.65Chapter 4.4.1 --- Convolution Versus Lifting --- p.65Chapter 4.4.2 --- DWT Pipeline --- p.67Chapter 4.5 --- Forward DWT --- p.68Chapter 4.6 --- Inverse DWT --- p.71Chapter 4.7 --- Results and Applications --- p.73Chapter 4.7.1 --- Geometric Deformation in Wavelet Domain --- p.73Chapter 4.7.2 --- Stylish Image Processing and Texture-illuminance De- coupling --- p.73Chapter 4.7.3 --- Hardware-Accelerated JPEG2000 Encoding --- p.75Chapter 4.8 --- Web Information --- p.78Chapter 5 --- Conclusion --- p.79Bibliography --- p.8

High-Speed Pipeline VLSI Architectures for Discrete Wavelet Transforms

The discrete wavelet transform (DWT) has been widely used in many fields, such as image compression, speech analysis and pattern recognition, because of its capability of decomposing a signal at multiple resolution levels. Due to the intensive computations involved with this transform, the design of efficient VLSI architectures for a fast computation of the transforms have become essential, especially for real-time applications and those requiring processing of high-speed data. The objective of this thesis is to develop a scheme for the design of hardware resource-efficient high-speed pipeline architectures for the computation of the DWT. The goal of high speed is achieved by maximizing the operating frequency and minimizing the number of clock cycles required for the DWT computation with little or no overhead on the hardware resources. In this thesis, an attempt is made to reach this goal by enhancing the inter-stage and intra-stage parallelisms through a systematic exploitation of the characteristics inherent in discrete wavelet transforms. In order to enhance the inter-stage parallelism, a study is undertaken for determining the number of pipeline stages required for the DWT computation so as to synchronize their operations and utilize their hardware resources efficiently. This is achieved by optimally distributing the computational load associated with the various resolution levels to an optimum number of stages of the pipeline. This study has determined that employment of two pipeline stages with the first one performing the task of the first resolution level and the second one that of all the other resolution levels of the 1-D DWT computation, and employment of three pipeline stages with the first and second ones performing the tasks of the first and second resolution levels and the third one performing that of the remaining resolution levels of the 2-D DWT computation, are the optimum choices for the development of 1-D and 2-D pipeline architectures, respectively. The enhancement of the intra-stage parallelism is based on two main ideas. The first idea, which stems from the fact that in each consecutive resolution level the input data are decimated by a factor of two along each dimension, is to decompose the filtering operation into subtasks that can be performed in parallel by operating on even- and odd-numbered samples along each dimension of the data. It is shown that each subtask, which is essentially a set of multiply-accumulate operations, can be performed by employing a MAC-cell network consisting of a two-dimensional array of bit-wise adders. The second idea in enhancing the intra-stage parallelism is to maximally extend the bit-wise addition operations of this network horizontally through a suitable arrangement of bit-wise adders so as to minimize the delay of its critical path. In order to validate the proposed scheme, design and implementation of two specific examples of pipeline architectures for the 1-D and 2-D DWT computations are considered. The simulation results show that the pipeline architectures designed using the proposed scheme are able to operate at high clock frequencies, and their performances, in terms of the processing speed and area-time product, are superior to those of the architectures designed based on other schemes and utilizing similar or higher amount of hardware resources. Finally, the two pipeline architectures designed using the proposed scheme are implemented in FPGA. The test results of the FPGA implementations validate the feasibility and effectiveness of the proposed scheme for designing DWT pipeline architectures

DESIGN AND IMPLEMENTATION OF LIFTING BASED DAUBECHIES WAVELET TRANSFORMS USING ALGEBRAIC INTEGERS

Over the past few decades, the demand for digital information has increased drastically. This enormous demand poses serious difficulties on the storage and transmission bandwidth of the current technologies. One possible solution to overcome this approach is to compress the amount of information by discarding all the redundancies. In multimedia technology, various lossy compression techniques are used to compress the raw image data to facilitate storage and to fit the transmission bandwidth. In this thesis, we propose a new approach using algebraic integers to reduce the complexity of the Daubechies-4 (D4) and Daubechies-6 (D6) Lifting based Discrete Wavelet Transforms. The resulting architecture is completely integer based, which is free from the round-off error that is caused in floating point calculations. The filter coefficients of the two transforms of Daubechies family are individually converted to integers by multiplying it with value of 2x, where, x is a random value selected at a point where the quantity of losses is negligible. The wavelet coefficients are then quantized using the proposed iterative individual-subband coding algorithm. The proposed coding algorithm is adopted from the well-known Embedded Zerotree Wavelet (EZW) coding. The results obtained from simulation shows that the proposed coding algorithm proves to be much faster than its predecessor, and at the same time, produces good Peak Signal to Noise Ratio (PSNR) at very low bit rates. Finally, the two proposed transform architectures are implemented on Virtex-E Field Programmable Gate Array (FPGA) to test the hardware cost (in terms of multipliers, adders and registers) and throughput rate. From the synthesis results, we see that the proposed algorithm has low hardware cost and a high throughput rate

Efficient reconfigurable architectures for 3D medical image compression

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Recently, the more widespread use of three-dimensional (3-D) imaging modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography (PET), and ultrasound (US) have generated a massive amount of volumetric data. These have provided an impetus to the development of other applications, in particular telemedicine and teleradiology. In these fields, medical image compression is important since both efficient storage and transmission of data through high-bandwidth digital communication lines are of crucial importance. Despite their advantages, most 3-D medical imaging algorithms are computationally intensive with matrix transformation as the most fundamental operation involved in the transform-based methods. Therefore, there is a real need for high-performance systems, whilst keeping architectures exible to allow for quick upgradeability with real-time applications. Moreover, in order to obtain efficient solutions for large medical volumes data, an efficient implementation of these operations is of significant importance. Reconfigurable hardware, in the form of field programmable gate arrays (FPGAs) has been proposed as viable system building block in the construction of high-performance systems at an economical price. Consequently, FPGAs seem an ideal candidate to harness and exploit their inherent advantages such as massive parallelism capabilities, multimillion gate counts, and special low-power packages. The key achievements of the work presented in this thesis are summarised as follows. Two architectures for 3-D Haar wavelet transform (HWT) have been proposed based on transpose-based computation and partial reconfiguration suitable for 3-D medical imaging applications. These applications require continuous hardware servicing, and as a result dynamic partial reconfiguration (DPR) has been introduced. Comparative study for both non-partial and partial reconfiguration implementation has shown that DPR offers many advantages and leads to a compelling solution for implementing computationally intensive applications such as 3-D medical image compression. Using DPR, several large systems are mapped to small hardware resources, and the area, power consumption as well as maximum frequency are optimised and improved. Moreover, an FPGA-based architecture of the finite Radon transform (FRAT)with three design strategies has been proposed: direct implementation of pseudo-code with a sequential or pipelined description, and block random access memory (BRAM)- based method. An analysis with various medical imaging modalities has been carried out. Results obtained for image de-noising implementation using FRAT exhibits promising results in reducing Gaussian white noise in medical images. In terms of hardware implementation, promising trade-offs on maximum frequency, throughput and area are also achieved. Furthermore, a novel hardware implementation of 3-D medical image compression system with context-based adaptive variable length coding (CAVLC) has been proposed. An evaluation of the 3-D integer transform (IT) and the discrete wavelet transform (DWT) with lifting scheme (LS) for transform blocks reveal that 3-D IT demonstrates better computational complexity than the 3-D DWT, whilst the 3-D DWT with LS exhibits a lossless compression that is significantly useful for medical image compression. Additionally, an architecture of CAVLC that is capable of compressing high-definition (HD) images in real-time without any buffer between the quantiser and the entropy coder is proposed. Through a judicious parallelisation, promising results have been obtained with limited resources. In summary, this research is tackling the issues of massive 3-D medical volumes data that requires compression as well as hardware implementation to accelerate the slowest operations in the system. Results obtained also reveal a significant achievement in terms of the architecture efficiency and applications performance.Ministry of Higher Education Malaysia (MOHE), Universiti Tun Hussein Onn Malaysia (UTHM) and the British Counci