Throughput-driven floorplanning with wire pipelining

The size of future high-performance SoC is such that the time-of-flight of wires connecting distant pins in the layout can be much higher than the clock period. In order to keep the frequency as high as possible, the wires may be pipelined. However, the insertion of flip-flops may alter the throughput of the system due to the presence of loops in the logic netlist. In this paper, we address the problem of floorplanning a large design where long interconnects are pipelined by inserting the throughput in the cost function of a tool based on simulated annealing. The results obtained on a series of benchmarks are then validated using a simple router that breaks long interconnects by suitably placing flip-flops along the wires

Nanometer VLSI placement and optimization for multi-objective design closure

In a VLSI physical synthesis flow, placement directly defines the interconnection, which affects many other design objectives, such as timing, power consumption, congestion, and thermal issues. With the scaling of technology, the relative interconnect delay increases dramatically. As a result, placement has become a bottleneck in deep sub-micron physical synthesis. In this dissertation, I propose several optimization algorithms from global placement, placement migration, timing driven placements, to incremental power optimizations for multi-objective VLSI design closure. The first work is DPlace, a new global placement algorithm that scales well to the modern large-scale circuit placement problems. DPlace simulates the natural diffusion process to spread cells smoothly over the placement region, and uses both analytical and discrete techniques to improve the wire length. However, global placement is never sufficient for multi-objective design closure, a variety of design objectives have to be improved incrementally, such as timing, routing congestion, signal integrity, and heat distribution. Placement migration is a critical step to address the cell overlaps appearing during incremental optimizations. To achieve high placement stability, I propose a computational geometry based placement migration flow to cope with placement changes, and a new stability metric to measure the “similarity” between two placements accurately. Our placement migration algorithm has clear advantage over conventional legalization algorithms such that the neighborhood characteristics of the original placement are preserved. For timing closure in high performance designs, I present a linear programming based incremental timing driven placement to improve the timing on critical paths directly. I further present an efficient timing driven placement algorithm (Pyramids). Two formulations of Pyramids are proposed, which are suitable for different optimization stages in a physical synthesis flow. Both approaches find the optimal location for timing of a cell in constant time, through computational geometry based approaches. For fast convergence of design closure, placement should be integrated with other optimization techniques. I propose to combine placement, gate sizing and Vt swapping techniques to reduce the total power consumption, especially the leakage power, which is becoming increasingly critical for nanometer VLSI design closure.Electrical and Computer Engineerin

Efficient quadratic placement for FPGAs.

Field Programmable Gate Arrays (FPGAs) are widely used in industry because they can implement any digital circuit on site simply by specifying programmable logic and their interconnections. However, this rapid prototyping advantage may be adversely affected because of the long compile time, which is dominated by placement and routing. This issue is of great importance, especially as the logic capacities of FPGAs continue to grow. This thesis focuses on the placement phase of FPGA Computer Aided Design (CAD) flow and presents a fast, high quality, wirelength-driven placement algorithm for FPGAs that is based on the quadratic placement approach. In this thesis, multiple iterations of equation solving process together with a linear wirelength reduction technique are introduced. The proposed algorithm efficiently handles the main problems with the quadratic placement algorithm and produces a fast and high quality placement. Experimental results, using twenty benchmark circuits, show that this algorithm can achieve comparable total wirelength and, on average, 5X faster run time when compared to an existing, state-of-the-art placement tool. This thesis also shows that the proposed algorithm delivers promising preliminary results in minimizing the critical path delay while maintaining high placement quality.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2005 .X86. Source: Masters Abstracts International, Volume: 44-04, page: 1946. Thesis (M.A.Sc.)--University of Windsor (Canada), 2005

High performance algorithms for large scale placement problem

Placement is one of the most important problems in electronic design automation (EDA). An inferior placement solution will not only affect the chip’s performance but might also make it nonmanufacturable by producing excessive wirelength, which is beyond available routing resources. Although placement has been extensively investigated for several decades, it is still a very challenging problem mainly due to that design scale has been dramatically increased by order of magnitudes and the increasing trend seems unstoppable. In modern design, chips commonly integrate millions of gates that require over tens of metal routing layers. Besides, new manufacturing techniques bring out new requests leading to that multi-objectives should be optimized simultaneously during placement. Our research provides high performance algorithms for placement problem. We propose (i) a high performance global placement core engine POLAR; (ii) an efficient routability-driven placer POLAR 2.0, which is an extension of POLAR to deal with routing congestion; (iii) an ultrafast global placer POLAR 3.0, which explore parallelism on POLAR and can make full use of multi-core system; (iv) some efficient triple patterning lithography (TPL) aware detailed placement algorithms

Physical design algorithms for asynchronous circuits

Asynchronous designs have been demonstrated to be able to achieve both higher performance and lower power compared with their synchronous counterparts. It provides a very promising solution to the emerging challenges in advanced technology. However, due to the lack of proper EDA tool support, the design cycle for asynchronous circuits is much longer compared with the one for synchronous circuits. Thus, even with many advantages, asynchronous circuits are still not the mainstream in the industry. In this thesis, we provides several algorithms to resolve the emerging issues for the physical design of asynchronous circuits. Our proposed algorithms optimize asynchronous circuits using placement, gate sizing, repeater insertion and pipeline buffer insertion techniques. An incremental maximum cycle ratio algorithm is also proposed to speed up the timing analysis of asynchronous circuits

Placement for fast and reliable through-silicon-via (TSV) based 3D-IC layouts

The objective of this research is to explore the feasibility of addressing the major performance and reliability problems or issues, such as wirelength, stress-induced carrier mobility variation, temperature, and quality trade-offs, found in three-dimensional integrated circuits (3D ICs) that use through-silicon vias (TSVs) at placement stage. Four main works that support this goal are included. In the first work, wirelength of TSV-based 3D ICs is the main focus. In the second work, stress-induced carrier mobility variation in TSV-based 3D ICs is examined. In the third work, temperature inside TSV-based 3D ICs is investigated. In the final work, the quality trade-offs of TSV-based 3D-IC designs are explored. In the first work, a force-directed, 3D, and gate-level placement algorithm that efficiently handles TSVs is developed. The experiments based on synthesized benchmarks indicate that the developed algorithm helps generate GDSII layouts of 3D-IC designs that are optimized in terms of wirelength. In addition, the impact of TSVs on other physical aspects of 3D-IC designs is also studied by analyzing the GDSII layouts. In the second work, the model for carrier mobility variation caused by TSV and STI stresses is developed as well as the timing analysis flow considering the stresses. The impact of TSV and STI stresses on carrier mobility variation and performance of 3D ICs is studied. Furthermore, a TSV-stress-driven, force-directed, and 3D placement algorithm is developed. It exploits carrier mobility variation, caused by stress around TSVs after fabrication, to improve the timing and area objectives during placement. In addition, the impact of keep-out zone (KOZ) around TSVs on stress, carrier mobility variation, area, wirelength, and performance of 3D ICs is studied. In the third work, two temperature-aware global placement algorithms are developed. They exploit die-to-die thermal coupling in 3D ICs to improve temperature during placement. In addition, a framework used to evaluate the results from temperature-aware global placements is developed. The main component of the framework is a GDSII-level thermal analysis that considers all structures inside a TSV-based 3D IC while computing temperature. The developed placers are compared with several state-of-the-art placers published in recent literature. The experimental results indicate that the developed algorithms help improve the temperature of 3D ICs effectively. In the final work, three block-level design styles for TSV-based die-to-wafer bonded 3D ICs are discussed. Several 3D-IC layouts in the three styles are manually designed. The main difference among these layouts is the position of TSVs. Finally, the area, wirelength, timing, power, temperature, and mechanical stress of all layouts are compared to explore the trade-offs of layout quality.PhDCommittee Chair: Lim, Sung Kyu; Committee Member: Bakir, Muhannad; Committee Member: Kim, Hyesoon; Committee Member: Mukhopadhyay, Saibal; Committee Member: Swaminathan, Madhava

An integrated placement and routing approach

As the feature size continues scaling down, interconnects become the major contributor of signal delay. Since interconnects are mainly determined by placement and routing, these two stages play key roles to achieve high performance. Historically, they are divided into two separate stages to make the problem tractable. Therefore, the routing information is not available during the placement process. Net models such as HPWL, are employed to approximate the routing to simplify the placement problem. However, the good placement in terms of these objectives may not be routable at all in the routing stage because different objectives are optimized in placement and routing stages. This inconsistancy makes the results obtained by the two-step optimization method far from optimal;In order to achieve high-quality placement solution and ensure the following routing, we propose an integrated placement and routing approach. In this approach, we integrate placement and routing into the same framework so that the objective optimized in placement is the same as that in routing. Since both placement and routing are very hard problems (NP-hard), we need to have very efficient algorithms so that integrating them together will not lead to intractable complexity;In this dissertation, we first develop a highly efficient placer - FastPlace 3.0 for large-scale mixed-size placement problem. Then, an efficient and effective detailed placer - FastDP is proposed to improve global placement by moving standard cells in designs. For high-degree nets in designs, we propose a novel performance-driven topology design algorithm to generate good topologies to achieve very strict timing requirement. In the routing phase, we develop two global routers, FastRoute and FastRoute 2.0. Compared to traditional global routers, they can generate better solutions and are two orders of magnitude faster. Finally, based on these efficient and high-quality placement and routing algorithms, we propose a new flow which integrates placement and routing together closely. In this flow, global routing is extensively applied to obtain the interconnect information and direct the placement process. In this way, we can get very good placement solutions with guaranteed routability

Custom Cell Placement Automation for Asynchronous VLSI

Asynchronous Very-Large-Scale-Integration (VLSI) integrated circuits have demonstrated many advantages over their synchronous counterparts, including low power consumption, elastic pipelining, robustness against manufacturing and temperature variations, etc. However, the lack of dedicated electronic design automation (EDA) tools, especially physical layout automation tools, largely limits the adoption of asynchronous circuits. Existing commercial placement tools are optimized for synchronous circuits, and require a standard cell library provided by semiconductor foundries to complete the physical design. The physical layouts of cells in this library have the same height to simplify the placement problem and the power distribution network. Although the standard cell methodology also works for asynchronous designs, the performance is inferior compared with counterparts designed using the full-custom design methodology. To tackle this challenge, we propose a gridded cell layout methodology for asynchronous circuits, in which the cell height and cell width can be any integer multiple of two grid values. The gridded cell approach combines the shape regularity of standard cells with the size flexibility of full-custom layouts. Therefore, this approach can achieve a better space utilization ratio and lower wire length for asynchronous designs. Experiments have shown that the gridded cell placement approach reduces area without impacting the routability. We have also used this placer to tape out a chip in a 65nm process technology, demonstrating that our placer generates design-rule clean results