Techniques for Reducing Redundant Unicast Traffic in HSR Networks

High-availability seamless redundancy (HSR) is a seamless redundancy protocol for Ethernet networks. HSR provides seamless communication with fault tolerance based on the duplication of every unicast frame sent in a ring topology. HSR is very useful for mission- and time-critical systems such as substation automation systems (SASs). However, the main drawback of HSR is to generate excessively redundant network traffic in HSR networks. This drawback would unnecessarily waste network bandwidth and hence could degrade network performance in HSR networks. Several traffic reduction techniques for HSR networks have been proposed to improve the network performance in the networks. These techniques can be classified into two main groups: traffic filtering-based and dual paths-based techniques. In this chapter, we provide a description and comparison of these HSR traffic reduction techniques. This chapter describes these traffic reduction techniques and compares their network performance. The operations, advantages, and disadvantages of these techniques are investigated and summarized

A study of the applicability of software-defined networking in industrial networks

173 p.Las redes industriales interconectan sensores y actuadores para llevar a cabo funciones de monitorización, control y protección en diferentes entornos, tales como sistemas de transporte o sistemas de automatización industrial. Estos sistemas ciberfísicos generalmente están soportados por múltiples redes de datos, ya sean cableadas o inalámbricas, a las cuales demandan nuevas prestaciones, de forma que el control y gestión de tales redes deben estar acoplados a las condiciones del propio sistema industrial. De este modo, aparecen requisitos relacionados con la flexibilidad, mantenibilidad y adaptabilidad, al mismo tiempo que las restricciones de calidad de servicio no se vean afectadas. Sin embargo, las estrategias de control de red tradicionales generalmente no se adaptan eficientemente a entornos cada vez más dinámicos y heterogéneos.Tras definir un conjunto de requerimientos de red y analizar las limitaciones de las soluciones actuales, se deduce que un control provisto independientemente de los propios dispositivos de red añadiría flexibilidad a dichas redes. Por consiguiente, la presente tesis explora la aplicabilidad de las redes definidas por software (Software-Defined Networking, SDN) en sistemas de automatización industrial. Para llevar a cabo este enfoque, se ha tomado como caso de estudio las redes de automatización basadas en el estándar IEC 61850, el cual es ampliamente usado en el diseño de las redes de comunicaciones en sistemas de distribución de energía, tales como las subestaciones eléctricas. El estándar IEC 61850 define diferentes servicios y protocolos con altos requisitos en terminos de latencia y disponibilidad de la red, los cuales han de ser satisfechos mediante técnicas de ingeniería de tráfico. Como resultado, aprovechando la flexibilidad y programabilidad ofrecidas por las redes definidas por software, en esta tesis se propone una arquitectura de control basada en el protocolo OpenFlow que, incluyendo tecnologías de gestión y monitorización de red, permite establecer políticas de tráfico acorde a su prioridad y al estado de la red.Además, las subestaciones eléctricas son un ejemplo representativo de infraestructura crítica, que son aquellas en las que un fallo puede resultar en graves pérdidas económicas, daños físicos y materiales. De esta forma, tales sistemas deben ser extremadamente seguros y robustos, por lo que es conveniente la implementación de topologías redundantes que ofrezcan un tiempo de reacción ante fallos mínimo. Con tal objetivo, el estándar IEC 62439-3 define los protocolos Parallel Redundancy Protocol (PRP) y High-availability Seamless Redundancy (HSR), los cuales garantizan un tiempo de recuperación nulo en caso de fallo mediante la redundancia activa de datos en redes Ethernet. Sin embargo, la gestión de redes basadas en PRP y HSR es estática e inflexible, lo que, añadido a la reducción de ancho de banda debida la duplicación de datos, hace difícil un control eficiente de los recursos disponibles. En dicho sentido, esta tesis propone control de la redundancia basado en el paradigma SDN para un aprovechamiento eficiente de topologías malladas, al mismo tiempo que se garantiza la disponibilidad de las aplicaciones de control y monitorización. En particular, se discute cómo el protocolo OpenFlow permite a un controlador externo configurar múltiples caminos redundantes entre dispositivos con varias interfaces de red, así como en entornos inalámbricos. De esta forma, los servicios críticos pueden protegerse en situaciones de interferencia y movilidad.La evaluación de la idoneidad de las soluciones propuestas ha sido llevada a cabo, principalmente, mediante la emulación de diferentes topologías y tipos de tráfico. Igualmente, se ha estudiado analítica y experimentalmente cómo afecta a la latencia el poder reducir el número de saltos en las comunicaciones con respecto al uso de un árbol de expansión, así como balancear la carga en una red de nivel 2. Además, se ha realizado un análisis de la mejora de la eficiencia en el uso de los recursos de red y la robustez alcanzada con la combinación de los protocolos PRP y HSR con un control llevado a cabo mediante OpenFlow. Estos resultados muestran que el modelo SDN podría mejorar significativamente las prestaciones de una red industrial de misión crítica

S3N - Smart Solution for Substation Networks, an architecture for the management of communication networks in power substations

ABSTRACT: Today, the communications network has become an essential element to the operation of any type of organization or infrastructure, such is the case of the electrical power substations. Such networks in particular, demand high levels of availability and reliability, as the substation is a key element in the chain of energy generation and distribution. However, although recent network modernization introduced new features that allow optimizing the operation of the substation, the variety of devices present in such environment (Intelligent Electronic Devices (IEDs), Merging Units (MUs), Network Switches, IEEE 1588 Master Clock) and the huge set of application-level protocols (Sampled Measured Values (SV), Generic Object Oriented Substation Event (GOOSE), Manufacturing Message Specification protocol (MMS), Precision Time Protocol (PTP), among others), increase the management complexity. Nevertheless, in recent years, data networks have been permeated by two major trends aiming to facilitate the administration of complex networks: Software Defined Networking (SDN) and virtualizationtechnologies, which make the network management more flexible and enable the rapid development and deployment of network services. This thesis proposes a set of contributions to solve the research challenges around of the current operation of a power substation communication network that have not been tackled by the research community. To do that, it performs a comprehensive review of the appropriation of SDN as an enabler in the management and operation of the power substations communication networks. The first research challenge we identified in this work is that, to the best of our knowledge, there are not research works proposing a complete architecture for the management of the communications networks of the power substation; also existing works do not introduce the virtualization technologies as an enabler in this environment. They only present how the application of SDN concepts may improve the performance of different communication tasks in power substations. This thesis introduces a novel architecture called Smart Solution for Substation Networks (S3N), which presents a different way to represent the interaction among all elements involved in the operation of the power substation, taking the communications network as the central point and the SDN paradigm as a key element of its formulation. The second challenge found in this work is that there is no unique criterion to define the structure of the network topology since, in every power substation, the end user implements their own topologies or the topology suggested by a vendor. In this context, this thesis presents a methodology to specify and characterize a reliable topology that vii guarantees fault-tolerance, according to the guidelines described in the architecture S3N. In addition, this thesis presents alternative SDN solutions for loops-based topologies in the proposed network topology which would be technically unfeasible using common network protocols. These solutions include algorithms to solve problems related to the broadcast and multicast traffic management. Also, we discovered that, although the communication networks of modern electrical substations provide major benefits, various research articles have evidenced several vulnerabilities related to the operation protocols in this critical infrastructure. This thesis, in order to improve the security, presents two strategies to detect intrusions and one SDN approach to mitigate attacks in the reconnaissance phase. Finally, all these contributions would not be enough to guarantee a reliable operation without mechanisms to bring traffic differentiation and provisioning. This thesis makes the best out of the architecture proposed to deploy Quality of Service (QoS) inside power substation communication networks, under the SDN paradigm

Automation, Protection and Control of Substation Based on IEC 61850

Reliability of power system protection system has been a key issue in the substation operation due to the use of multi-vendor equipment of proprietary features, environmental issues, and complex fault diagnosis. Failure to address these issues could have a significant effect on the performance of the entire electricity grid. With the introduction of IEC 61850 standard, substation automation system (SAS) has significantly altered the scenario in utilities and industries as indicated in this thesis

Traffic engineering multi-layer optimization for wireless mesh network transmission a campus network routing protocol transmission performance inhancement

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityThe wireless mesh network is a potential network for the future due to its excellent inherent characteristic for dynamic self-healing, self-configuration and self-organization. It also has the advantage of easy interoperability networking and the ability to form multi-linked ad-hoc networks. It has a decentralized topology, is cheap and highly scalable. Furthermore, its ease in deployment and easy maintenance are other inherent networking qualities. These aforementioned qualities of the wireless mesh network bring advantages to transmission capability of heterogeneous networks. However, transmissions in wireless mesh network create comparative performance based challenges such as congestion, load-balancing, scalability over increasing networks and coverage capacity. Consequently, these challenges and problems in the routing and switching of packets in the wireless mesh network routing protocols led to a proposal on the resolution of these failures with a combination algorithm and a management based security for the network and its transmitted packets. There are equally contentious services like reliability of the network and quality of service for real-time multimedia traffic flows with other challenges such as path computation and selection in the wireless mesh network. This thesis is therefore a cumulative proposal to the resolution of the outlined challenges and open research areas posed by using wireless mesh network routing protocol. It advances the resolution of these challenges in the mesh environment using a hybrid optimization – traffic engineering, to increase the effectiveness and the reliability of the network. It also proffers a cumulative resolution of the diverse contributions on wireless mesh network routing protocol and transmission. Adaptation and optimization are carried out on the wireless mesh network designed network using traffic engineering mechanism and technique. The research examines the patterns of mesh packet transmission and evaluates the challenges and failures in the mesh network packet transmission. It develops a solution based algorithm for resolutions and proposes the traffic engineering based solution.. These resultant performances and analysis are usually tested and compared over wireless mesh IEEE802.11n or other older proposed documented solution. This thesis used a carefully designed campus mesh network to show a comparative evaluation of an optimal performance of the mesh nodes and routers over a normal IEE802.11n based wireless domain network to show differentiation by optimization using the created algorithms. Furthermore, the indexes of performance being the metric are used to measure the utility and the reliability, including capacity and throughput at the destination during traffic engineered transmission. In addition, the security of these transmitted data and packets are optimized under a traffic engineered technique. Finally, this thesis offers an understanding to the security contribution using traffic engineering resolution to create a management algorithm for processing and computation of the wireless mesh networks security needs. The results of this thesis confirmed, completed and extended the existing predictions with real measurement

Bandwidth and Energy-Efficient Route Discovery for Noisy Mobile Ad-Hoc Networks

Broadcasting is used in on-demand routing protocols to discover routes in Mobile Ad-hoc Networks (MANETs). On-demand routing protocols, such as Ad-hoc On-demand Distance Vector (AODV) commonly employ pure flooding based broadcasting to discover new routes. In pure flooding, a route request (RREQ) packet is broadcast by the source node and each receiving node rebroadcasts it. This continues until the RREQ packet arrives at the destination node. Pure flooding generates excessive redundant routing traffic that may lead to the broadcast storm problem (BSP) and deteriorate the performance of MANETs significantly. A number of probabilistic broadcasting schemes have been proposed in the literature to address BSP. However, these schemes do not consider thermal noise and interference which exist in real life MANETs, and therefore, do not perform well in real life MANETs. Real life MANETs are noisy and the communication is not error free. This research argues that a broadcast scheme that considers the effects of thermal noise, co-channel interference, and node density in the neighbourhood simultaneously can reduce the broadcast storm problem and enhance the MANET performance. To achieve this, three investigations have been carried out: First, the effect of carrier sensing ranges on on-demand routing protocol such as AODV and their impact on interference; second, effects of thermal noise on on-demand routing protocols and third, evaluation of pure flooding and probabilistic broadcasting schemes under noisy and noiseless conditions. The findings of these investigations are exploited to propose a Channel Adaptive Probabilistic Broadcast (CAPB) scheme to disseminate RREQ packets efficiently. The proposed CAPB scheme determines the probability of rebroadcasting RREQ packets on the fly according to the current Signal to Interference plus Noise Ratio (SINR) and node density in the neighbourhood. The proposed scheme and two related state of the art (SoA) schemes from the literature are implemented in the standard AODV to replace the pure flooding based broadcast scheme. Ns-2 simulation results show that the proposed CAPB scheme outperforms the other schemes in terms of routing overhead, average end-to-end delay, throughput and energy consumption

Scalability and Resilience Analysis of Software-Defined Networking

Software-defined Networking (SDN) ist eine moderne Architektur für Kommunikationsnetze, welche entwickelt wurde, um die Einführung von neuen Diensten und Funktionen in Netzwerke zu erleichtern. Durch eine Trennung der Weiterleitungs- und Kontrollfunktionen sind nur wenige Kontrollelemente mit Software-Updates zu versehen, um Veränderungen am Netz vornehmen zu können. Allerdings wirft die Netzstrukturierung von SDN neue Fragen bezüglich Skalierbarkeit und Ausfallsicherheit auf, welche in dezentralen Netzstrukturen nicht auftreten. In dieser Arbeit befassen wir uns mit Fragestellungen zu Skalierbarkeit und Ausfallsicherheit in Bezug auf Unicast- und Multicast-Verkehr in SDN-basierten Netzen. Wir führen eine Komprimierungstechnik für Routingtabellen ein, welche die Skalierungsproblematik aktueller SDN Weiterleitungsgeräte verbessern soll und ermitteln ihre Effizienz in einer Leistungsbewertung. Außerdem diskutieren wir unterschiedliche Methoden, um die Ausfallsicherheit in SDN zu verbessern. Wir analysieren sie auf öffentlich zugänglichen Netzwerken und benennen Vor- und Nachteile der Ansätze. Abschließend schlagen wir eine skalierbare und ausfallsichere Architektur für Multicast-basiertes SDN vor. Wir untersuchen ihre Effizienz in einer Leistungsbewertung und zeigen ihre Umsetzbarkeit mithilfe eines Prototypen.Software-Defined Networking (SDN) is a novel architecture for communication networks that has been developed to ease the introduction of new network services and functions. It leverages the separation of the data plane and the control plane to allow network services to be deployed solely in software. Although SDN provides great flexibility, the applicability of SDN in communication networks raises several questions with regard to scalability and resilience against network failures. These concerns are not prevalent in current decentralized network architectures. In this thesis, we address scalability and resilience issues with regard to unicast and multicast traffic for SDN-based networks. We propose a new compression method for inter-domain routing tables to address hardware limitations of current SDN switches and analyze its effectiveness. We propose various resilience methods for SDN and identify their key performance indicators in the context of carrier-grade and datacenter networks. We discuss the advantages and disadvantages of these proposals and their appropriate use cases. Finally, we propose a scalable and resilient software-defined multicast architecture. We study the effectiveness of our approach and show its feasibility using a prototype implementation

Performance measurements and analysis of the existing wireless communication technology in Iraq.

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityIraq may be considered as the largest wireless market in the Gulf region. A key driving factor in the market of wireless communication, it has seen enormous growth in the mobile phone market over the last five years leading to almost 24 million subscribers in 2011. Moreover, there are several technologies and services working in Iraq; three GSM Operators, three CDMA national operators and three CDMA provinces operators. The recent growth in the mobile phone market is based on the Global System for Mobile (GSM) communications and Code Division Multiple Access (CDMA) standards creating the next-generation wireless technologies in the Iraqi Wireless Communication market. One of the essential issues of this research is to investigate the performance of the decreased Quality Of Service (QoS) caused by interferences in the services on GSM/CDMA operators in Iraq. Many issues should be studied and taken into consideration, such as; does the Multi-Coalition Forces cause the interferences, jamming, higher rate of calls drop and false ringing; or are they caused by bad design and planning? Do we need to optimise our network due to the large number of users? All these factors are investigated and the measurements of most service providers and government agencies will be gathered. A detailed analysis was included from the providers with measurements of performance and the reasons for the deterioration of wireless services. The novel contributions of this thesis is the extensive radio measurement campaign over the three mobile an CDMA operator networks and the analysis and recommendations that were drawn to suggest the best approach to improve the QoS of Wireless communication technologies. Awareness of actual reasons behind the deterioration of services will be raised to the Iraqi Government, CMC and the wireless service providers

Recent Trends in Communication Networks

In recent years there has been many developments in communication technology. This has greatly enhanced the computing power of small handheld resource-constrained mobile devices. Different generations of communication technology have evolved. This had led to new research for communication of large volumes of data in different transmission media and the design of different communication protocols. Another direction of research concerns the secure and error-free communication between the sender and receiver despite the risk of the presence of an eavesdropper. For the communication requirement of a huge amount of multimedia streaming data, a lot of research has been carried out in the design of proper overlay networks. The book addresses new research techniques that have evolved to handle these challenges

Research and Technology, 1998

This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for the fiscal year 1998. It comprises 134 short articles submitted by the staff scientists and engineers. The report is organized into five major sections: Aeronautics, Research and Technology, Space, Engineering and Technical Services, and Commercial Technology. A table of contents and an author index have been developed to assist readers in finding articles of special interest. This report is not intended to he a comprehensive summary of all the research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. At the time of publication, NASA Lewis was undergoing a name change to the NASA John H. Glenn Research Center at Lewis Field