An area-optimized N-bit multiplication technique using N/2-bit multiplication algorithm

A unique design for an optimized N-bit multiplier is proposed and implemented which utilizes a modified divide-and-conquer technique. The conventional technique requires four N/2-bit multipliers to perform N-bit multiplication, whereas the proposed design uses only one multiplier module in hardware to perform the functionality of four modules. It uses Dadda algorithm in its multiplier module. It has been implemented using Verilog HDL, and a good accuracy of results was observed in simulations which effectively verify its functionality. Design was also synthesized on various FPGAs including Spartan 3E, Virtex-5 and Virtex-7. Performance summary, after place and route, showed that the proposed approach significantly reduces hardware utilization. Furthermore, the proposed design is almost 75% more efficient in terms of resources utilization and operating frequency as compared to the conventional design

Cross-Layer Automated Hardware Design for Accuracy-Configurable Approximate Computing

Approximate Computing trades off computation accuracy against performance or energy efficiency. It is a design paradigm that arose in the last decade as an answer to diminishing returns from Dennard\u27s scaling and a shift in the prominent workloads. A range of modern workloads, categorized mainly as recognition, mining, and synthesis, features an inherent tolerance to approximations. Their characteristics, such as redundancies in their input data and robust-to-noise algorithms, allow them to produce outputs of acceptable quality, despite an approximation in some of their computations. Approximate Computing leverages the application tolerance by relaxing the exactness in computation towards primary design goals of increasing performance or improving energy efficiency. Existing techniques span across the abstraction layers of computer systems where cross-layer techniques are shown to offer a larger design space and yield higher savings. Currently, the majority of the existing work aims at meeting a single accuracy. The extent of approximation tolerance, however, significantly varies with a change in input characteristics and applications. In this dissertation, methods and implementations are presented for cross-layer and automated design of accuracy-configurable Approximate Computing to maximally exploit the performance and energy benefits. In particular, this dissertation addresses the following challenges and introduces novel contributions: A main Approximate Computing category in hardware is to scale either voltage or frequency beyond the safe limits for power or performance benefits, respectively. The rationale is that timing errors would be gradual and for an initial range tolerable. This scaling enables a fine-grain accuracy-configurability by varying the timing error occurrence. However, conventional synthesis tools aim at meeting a single delay for all paths within the circuit. Subsequently, with voltage or frequency scaling, either all paths succeed, or a large number of paths fail simultaneously, with a steep increase in error rate and magnitude. This dissertation presents an automated method for minimizing path delays by individually constraining the primary outputs of combinational circuits. As a result, it reduces the number of failing paths and makes the timing errors significantly more gradual, and also rarer and smaller on average. Additionally, it reveals that delays can be significantly reduced towards the least significant bit (LSB) and allows operating at a higher frequency when small operands are computed. Precision scaling, i.e., reducing the representation of data and its accuracy is widely used in multiple abstraction layers in Approximate Computing. Reducing data precision also reduces the transistor toggles, and therefore the dynamic power consumption. Application and architecture level precision scaling results in using only LSBs of the circuit. Arithmetic circuits often have less complexity and logic depth in LSBs compared to most significant bits (MSB). To take advantage of this circuit property, a delay-altering synthesis methodology is proposed. The method finds energy-optimal delay values under configurable precision usage and assigns them to primary outputs used for different precisions. Thereby, it enables dynamic frequency-precision scalable circuits for energy efficiency. Within the hardware architecture, it is possible to instantiate multiple units with the same functionality with different fixed approximation levels, where each block benefits from having fewer transistors and also synthesis relaxations. These blocks can be selected dynamically and thus allow to configure the accuracy during runtime. Instantiating such approximate blocks can be a lower dynamic power but higher area and leakage cost alternative to the current state-of-the-art gating mechanisms which switch off a group of paths in the circuit to reduce the toggling activity. Jointly, instantiating multiple blocks and gating mechanisms produce a large design space of accuracy-configurable hardware, where energy-optimal solutions require a cross-layer search in architecture and circuit levels. To that end, an approximate hardware synthesis methodology is proposed with joint optimizations in architecture and circuit for dynamic accuracy scaling, and thereby it enables energy vs. area trade-offs

Energy efficient hardware acceleration of multimedia processing tools

The world of mobile devices is experiencing an ongoing trend of feature enhancement and generalpurpose multimedia platform convergence. This trend poses many grand challenges, the most pressing being their limited battery life as a consequence of delivering computationally demanding features. The envisaged mobile application features can be considered to be accelerated by a set of underpinning hardware blocks Based on the survey that this thesis presents on modem video compression standards and their associated enabling technologies, it is concluded that tight energy and throughput constraints can still be effectively tackled at algorithmic level in order to design re-usable optimised hardware acceleration cores. To prove these conclusions, the work m this thesis is focused on two of the basic enabling technologies that support mobile video applications, namely the Shape Adaptive Discrete Cosine Transform (SA-DCT) and its inverse, the SA-IDCT. The hardware architectures presented in this work have been designed with energy efficiency in mind. This goal is achieved by employing high level techniques such as redundant computation elimination, parallelism and low switching computation structures. Both architectures compare favourably against the relevant pnor art in the literature. The SA-DCT/IDCT technologies are instances of a more general computation - namely, both are Constant Matrix Multiplication (CMM) operations. Thus, this thesis also proposes an algorithm for the efficient hardware design of any general CMM-based enabling technology. The proposed algorithm leverages the effective solution search capability of genetic programming. A bonus feature of the proposed modelling approach is that it is further amenable to hardware acceleration. Another bonus feature is an early exit mechanism that achieves large search space reductions .Results show an improvement on state of the art algorithms with future potential for even greater savings

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Integrated Programmable-Array accelerator to design heterogeneous ultra-low power manycore architectures

There is an ever-increasing demand for energy efficiency (EE) in rapidly evolving Internet-of-Things end nodes. This pushes researchers and engineers to develop solutions that provide both Application-Specific Integrated Circuit-like EE and Field-Programmable Gate Array-like flexibility. One such solution is Coarse Grain Reconfigurable Array (CGRA). Over the past decades, CGRAs have evolved and are competing to become mainstream hardware accelerators, especially for accelerating Digital Signal Processing (DSP) applications. Due to the over-specialization of computing architectures, the focus is shifting towards fitting an extensive data representation range into fewer bits, e.g., a 32-bit space can represent a more extensive data range with floating-point (FP) representation than an integer representation. Computation using FP representation requires numerous encodings and leads to complex circuits for the FP operators, decreasing the EE of the entire system. This thesis presents the design of an EE ultra-low-power CGRA with native support for FP computation by leveraging an emerging paradigm of approximate computing called transprecision computing. We also present the contributions in the compilation toolchain and system-level integration of CGRA in a System-on-Chip, to envision the proposed CGRA as an EE hardware accelerator. Finally, an extensive set of experiments using real-world algorithms employed in near-sensor processing applications are performed, and results are compared with state-of-the-art (SoA) architectures. It is empirically shown that our proposed CGRA provides better results w.r.t. SoA architectures in terms of power, performance, and area

Design Techniques for Energy-Quality Scalable Digital Systems

Energy efficiency is one of the key design goals in modern computing. Increasingly complex tasks are being executed in mobile devices and Internet of Things end-nodes, which are expected to operate for long time intervals, in the orders of months or years, with the limited energy budgets provided by small form-factor batteries. Fortunately, many of such tasks are error resilient, meaning that they can toler- ate some relaxation in the accuracy, precision or reliability of internal operations, without a significant impact on the overall output quality. The error resilience of an application may derive from a number of factors. The processing of analog sensor inputs measuring quantities from the physical world may not always require maximum precision, as the amount of information that can be extracted is limited by the presence of external noise. Outputs destined for human consumption may also contain small or occasional errors, thanks to the limited capabilities of our vision and hearing systems. Finally, some computational patterns commonly found in domains such as statistics, machine learning and operational research, naturally tend to reduce or eliminate errors. Energy-Quality (EQ) scalable digital systems systematically trade off the quality of computations with energy efficiency, by relaxing the precision, the accuracy, or the reliability of internal software and hardware components in exchange for energy reductions. This design paradigm is believed to offer one of the most promising solutions to the impelling need for low-energy computing. Despite these high expectations, the current state-of-the-art in EQ scalable design suffers from important shortcomings. First, the great majority of techniques proposed in literature focus only on processing hardware and software components. Nonetheless, for many real devices, processing contributes only to a small portion of the total energy consumption, which is dominated by other components (e.g. I/O, memory or data transfers). Second, in order to fulfill its promises and become diffused in commercial devices, EQ scalable design needs to achieve industrial level maturity. This involves moving from purely academic research based on high-level models and theoretical assumptions to engineered flows compatible with existing industry standards. Third, the time-varying nature of error tolerance, both among different applications and within a single task, should become more central in the proposed design methods. This involves designing “dynamic” systems in which the precision or reliability of operations (and consequently their energy consumption) can be dynamically tuned at runtime, rather than “static” solutions, in which the output quality is fixed at design-time. This thesis introduces several new EQ scalable design techniques for digital systems that take the previous observations into account. Besides processing, the proposed methods apply the principles of EQ scalable design also to interconnects and peripherals, which are often relevant contributors to the total energy in sensor nodes and mobile systems respectively. Regardless of the target component, the presented techniques pay special attention to the accurate evaluation of benefits and overheads deriving from EQ scalability, using industrial-level models, and on the integration with existing standard tools and protocols. Moreover, all the works presented in this thesis allow the dynamic reconfiguration of output quality and energy consumption. More specifically, the contribution of this thesis is divided in three parts. In a first body of work, the design of EQ scalable modules for processing hardware data paths is considered. Three design flows are presented, targeting different technologies and exploiting different ways to achieve EQ scalability, i.e. timing-induced errors and precision reduction. These works are inspired by previous approaches from the literature, namely Reduced-Precision Redundancy and Dynamic Accuracy Scaling, which are re-thought to make them compatible with standard Electronic Design Automation (EDA) tools and flows, providing solutions to overcome their main limitations. The second part of the thesis investigates the application of EQ scalable design to serial interconnects, which are the de facto standard for data exchanges between processing hardware and sensors. In this context, two novel bus encodings are proposed, called Approximate Differential Encoding and Serial-T0, that exploit the statistical characteristics of data produced by sensors to reduce the energy consumption on the bus at the cost of controlled data approximations. The two techniques achieve different results for data of different origins, but share the common features of allowing runtime reconfiguration of the allowed error and being compatible with standard serial bus protocols. Finally, the last part of the manuscript is devoted to the application of EQ scalable design principles to displays, which are often among the most energy- hungry components in mobile systems. The two proposals in this context leverage the emissive nature of Organic Light-Emitting Diode (OLED) displays to save energy by altering the displayed image, thus inducing an output quality reduction that depends on the amount of such alteration. The first technique implements an image-adaptive form of brightness scaling, whose outputs are optimized in terms of balance between power consumption and similarity with the input. The second approach achieves concurrent power reduction and image enhancement, by means of an adaptive polynomial transformation. Both solutions focus on minimizing the overheads associated with a real-time implementation of the transformations in software or hardware, so that these do not offset the savings in the display. For each of these three topics, results show that the aforementioned goal of building EQ scalable systems compatible with existing best practices and mature for being integrated in commercial devices can be effectively achieved. Moreover, they also show that very simple and similar principles can be applied to design EQ scalable versions of different system components (processing, peripherals and I/O), and to equip these components with knobs for the runtime reconfiguration of the energy versus quality tradeoff

Generic low power reconfigurable distributed arithmetic processor

Higher performance, lower cost, increasingly minimizing integrated circuit components, and higher packaging density of chips are ongoing goals of the microelectronic and computer industry. As these goals are being achieved, however, power consumption and flexibility are increasingly becoming bottlenecks that need to be addressed with the new technology in Very Large-Scale Integrated (VLSI) design. For modern systems, more energy is required to support the powerful computational capability which accords with the increasing requirements, and these requirements cause the change of standards not only in audio and video broadcasting but also in communication such as wireless connection and network protocols. Powerful flexibility and low consumption are repellent, but their combination in one system is the ultimate goal of designers. A generic domain-specific low-power reconfigurable processor for the distributed arithmetic algorithm is presented in this dissertation. This domain reconfigurable processor features high efficiency in terms of area, power and delay, which approaches the performance of an ASIC design, while retaining the flexibility of programmable platforms. The architecture not only supports typical distributed arithmetic algorithms which can be found in most still picture compression standards and video conferencing standards, but also offers implementation ability for other distributed arithmetic algorithms found in digital signal processing, telecommunication protocols and automatic control. In this processor, a simple reconfigurable low power control unit is implemented with good performance in area, power and timing. The generic characteristic of the architecture makes it applicable for any small and medium size finite state machines which can be used as control units to implement complex system behaviour and can be found in almost all engineering disciplines. Furthermore, to map target applications efficiently onto the proposed architecture, a new algorithm is introduced for searching for the best common sharing terms set and it keeps the area and power consumption of the implementation at low level. The software implementation of this algorithm is presented, which can be used not only for the proposed architecture in this dissertation but also for all the implementations with adder-based distributed arithmetic algorithms. In addition, some low power design techniques are applied in the architecture, such as unsymmetrical design style including unsymmetrical interconnection arranging, unsymmetrical PTBs selection and unsymmetrical mapping basic computing units. All these design techniques achieve extraordinary power consumption saving. It is believed that they can be extended to more low power designs and architectures. The processor presented in this dissertation can be used to implement complex, high performance distributed arithmetic algorithms for communication and image processing applications with low cost in area and power compared with the traditional methods

Design and optimization of approximate multipliers and dividers for integer and floating-point arithmetic

The dawn of the twenty-first century has witnessed an explosion in the number of digital devices and data. While the emerging deep learning algorithms to extract information from this vast sea of data are becoming increasingly compute-intensive, traditional means of improving computing power are no longer yielding gains at the same rate due to the diminishing returns from traditional technology scaling. To minimize the increasing gap between computational demands and the available resources, the paradigm of approximate computing is emerging as one of the potential solutions. Specifically, the resource-efficient approximate arithmetic units promise overall system efficiency, since most of the compute-intensive applications are dominated by arithmetic operations. This thesis primarily presents design techniques for approximate hardware multipliers and dividers. The thesis presents the design of two approximate integer multipliers and an approximate integer divider. These are: an error-configurable minimally-biased approximate integer multiplier (MBM), an error-configurable reduced-error approximate log based multiplier (REALM), and error-configurable integer divider INZeD. The two multiplier designs and the divider designs are based on the coupling of novel mathematically formulated error-reduction mechanisms in the classical approximate log based multiplier and dividers, respectively. They exhibit very low error bias and offer Pareto-optimal error vs. resource-efficiency trade-offs when compared with the state-of-the-art approximate integer multipliers/dividers. Further, the thesis also presents design of approximate floating-point multipliers and dividers. These designs utilize the optimized versions of the proposed MBM and REALM multipliers for mantissa multiplications and the proposed INZeD divider for mantissa division, and offer better design trade-offs than traditional precision scaling. The existing approximate integer dividers as well as the proposed INZeD suffer from unreasonably high worst-case error. This thesis presents WEID, which is a novel light-weight method for reducing worst-case error in approximate dividers. Finally, the thesis presents a methodology for selection of approximate arithmetic units for a given application. The methodology is based on a novel selection algorithm and utilizes the subrange error characterization of approximate arithmetic units, which performs error characterization independently in different segments of the input range

Efficient Hardware Architectures for Accelerating Deep Neural Networks: Survey

In the modern-day era of technology, a paradigm shift has been witnessed in the areas involving applications of Artificial Intelligence (AI), Machine Learning (ML), and Deep Learning (DL). Specifically, Deep Neural Networks (DNNs) have emerged as a popular field of interest in most AI applications such as computer vision, image and video processing, robotics, etc. In the context of developed digital technologies and the availability of authentic data and data handling infrastructure, DNNs have been a credible choice for solving more complex real-life problems. The performance and accuracy of a DNN is a way better than human intelligence in certain situations. However, it is noteworthy that the DNN is computationally too cumbersome in terms of the resources and time to handle these computations. Furthermore, general-purpose architectures like CPUs have issues in handling such computationally intensive algorithms. Therefore, a lot of interest and efforts have been invested by the research fraternity in specialized hardware architectures such as Graphics Processing Unit (GPU), Field Programmable Gate Array (FPGA), Application Specific Integrated Circuit (ASIC), and Coarse Grained Reconfigurable Array (CGRA) in the context of effective implementation of computationally intensive algorithms. This paper brings forward the various research works carried out on the development and deployment of DNNs using the aforementioned specialized hardware architectures and embedded AI accelerators. The review discusses the detailed description of the specialized hardware-based accelerators used in the training and/or inference of DNN. A comparative study based on factors like power, area, and throughput, is also made on the various accelerators discussed. Finally, future research and development directions are discussed, such as future trends in DNN implementation on specialized hardware accelerators. This review article is intended to serve as a guide for hardware architectures for accelerating and improving the effectiveness of deep learning research.publishedVersio

Asynchronous design of a multi-dimensional logarithmic number system processor for digital hearing instruments.

This thesis presents an asynchronous Multi-Dimensional Logarithmic Number System (MDLNS) processor that exhibits very low power dissipation. The target application is for a hearing instrument DSP. The MDLNS is a newly developed number system that has the advantage of reducing hardware complexity compared to the classical Logarithmic Number System (LNS). A synchronous implementation of a 2-digit 2DLNS filterbank, using the MDLNS to construct a FIR filterbank, has successfully proved that this novel number representation can benefit this digital hearing instrument application in the requirement of small size and low power. In this thesis we demonstrate that the combination of using the MDLNS, along with an asynchronous design methodology, produces impressive power savings compared to the previous synchronous design. A 4-phase bundled-data full-handshaking protocol is applied to the asynchronous control design. We adopt the Differential Cascade Voltage Switch Logic (DCVSL) circuit family for the design of the computation cells in this asynchronous MDLNS processor. Besides the asynchronous design methodology, we also use finite ring calculations to reduce adder bit-width to provide improvements compared to the previous MDLNS filterbank architecture. Spectre power simulation results from simulations of this asynchronous MDLNS processor demonstrate that over 70 percent power savings have been achieved compared to the synchronous design. This full-custom asynchronous MDLNS processor has been submitted for fabrication in the TSMC 0.18mum CMOS technology. A further contribution in this thesis is the development of a novel synchronizing method of design for testability (DfT), which is offered as a possible solution for asynchronous DfT methods.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .W85. Source: Masters Abstracts International, Volume: 43-01, page: 0288. Advisers: G. A. Jullien; W. C. Miller. Thesis (M.A.Sc.)--University of Windsor (Canada), 2004