625 research outputs found
Low-Density EEG Correction With Multivariate Decomposition and Subspace Reconstruction
A hybrid method is proposed for removing artifacts from electroencephalographic (EEG) signals. This relies on the integration of artifact subspace reconstruction (ASR) with multivariate empirical mode decomposition (EMD). The method can be applied when few EEG sensors are available, a condition in which existing techniques are not effective, and it was tested with two public datasets: 1) semisynthetic data and 2) experimental data with artifacts. One to four EEG sensors were taken into account, and the proposal was compared to both ASR and multivariate EMD (MEMD) alone. The proposed method efficiently removed muscular, ocular, or eye-blink artifacts on both semisynthetic and experimental data. Unexpectedly, the ASR alone also showed compatible performance on semisynthetic data. However, ASR did not work properly when experimental data were considered. Finally, MEMD was found less effective than both ASR and MEMD-ASR
Removal of Muscle Artifacts from Single-Channel EEG Based on Ensemble Empirical Mode Decomposition and Multiset Canonical Correlation Analysis
Electroencephalogram (EEG) recordings are often contaminated with muscle artifacts. This disturbing muscular activity strongly affects the visual analysis of EEG and impairs the results of EEG signal processing such as brain connectivity analysis. If multichannel EEG recordings are available, then there exist a considerable range of methods which can remove or to some extent suppress the distorting effect of such artifacts. Yet to our knowledge, there is no existing means to remove muscle artifacts from single-channel EEG recordings. Moreover, considering the recently increasing need for biomedical signal processing in ambulatory situations, it is crucially important to develop single-channel techniques. In this work, we propose a simple, yet effective method to achieve the muscle artifact removal from single-channel EEG, by combining ensemble empirical mode decomposition (EEMD) with multiset canonical correlation analysis (MCCA). We demonstrate the performance of the proposed method through numerical simulations and application to real EEG recordings contaminated with muscle artifacts. The proposed method can successfully remove muscle artifacts without altering the recorded underlying EEG activity. It is a promising tool for real-world biomedical signal processing applications
Epileptic seizure detection and prediction based on EEG signal
Epilepsy is a kind of chronic brain disfunction, manifesting as recurrent seizures which is caused by sudden and excessive discharge of neurons. Electroencephalogram (EEG) recordings is regarded as the golden standard for clinical diagnosis of epilepsy disease. The diagnosis of epilepsy disease by professional doctors clinically is time-consuming. With the help artificial intelligence algorithms, the task of automatic epileptic seizure detection and prediction is called a research hotspot.
The thesis mainly contributes to propose a solution to overfitting problem of EEG signal in deep learning and a method of multiple channels fusion for EEG features. The result of proposed method achieves outstanding performance in seizure detection task and seizure prediction task.
In seizure detection task, this paper mainly explores the effect of the deep learning in small data size. This thesis designs a hybrid model of CNN and SVM for epilepsy detection compared with end-to-end classification by deep learning. Another technique for overfitting is new EEG signal generation based on decomposition and recombination of EEG in time-frequency domain. It achieved a classification accuracy of 98.8%, a specificity of 98.9% and a sensitivity of 98.4% on the classic Bonn EEG data.
In seizure prediction task, this paper proposes a feature fusion method for multi-channel EEG signals. We extract a three-order tensor feature in temporal, spectral and spatial domain. UMLDA is a tensor-to-vector projection method, which ensures minimal redundancy between feature dimensions. An excellent experimental result was finally obtained, including an average accuracy of 95%, 94% F1-measure and 90% Kappa index
A systematic review on artifact removal and classification techniques for enhanced MEG-based BCI systems
Neurological disease victims may be completely paralyzed and unable to move, but they may still be able to think. Their brain activity is the only means by which they can interact with their environment. Brain-Computer Interface (BCI) research attempts to create tools that support subjects with disabilities. Furthermore, BCI research has expanded rapidly over the past few decades as a result of the interest in creating a new kind of human-to-machine communication. As magnetoencephalography (MEG) has superior spatial and temporal resolution than other approaches, it is being utilized to measure brain activity non-invasively. The recorded signal includes signals related to brain activity as well as noise and artifacts from numerous sources. MEG can have a low signal-to-noise ratio because the magnetic fields generated by cortical activity are small compared to other artifacts and noise. By using the right techniques for noise and artifact detection and removal, the signal-to-noise ratio can be increased. This article analyses various methods for removing artifacts as well as classification strategies. Additionally, this offers a study of the influence of Deep Learning models on the BCI system. Furthermore, the various challenges in collecting and analyzing MEG signals as well as possible study fields in MEG-based BCI are examined
Advanced Signal Processing in Wearable Sensors for Health Monitoring
Smart, wearables devices on a miniature scale are becoming increasingly widely available, typically in the form of smart watches and other connected devices. Consequently, devices to assist in measurements such as electroencephalography (EEG), electrocardiogram (ECG), electromyography (EMG), blood pressure (BP), photoplethysmography (PPG), heart rhythm, respiration rate, apnoea, and motion detection are becoming more available, and play a significant role in healthcare monitoring. The industry is placing great emphasis on making these devices and technologies available on smart devices such as phones and watches. Such measurements are clinically and scientifically useful for real-time monitoring, long-term care, and diagnosis and therapeutic techniques. However, a pertaining issue is that recorded data are usually noisy, contain many artefacts, and are affected by external factors such as movements and physical conditions. In order to obtain accurate and meaningful indicators, the signal has to be processed and conditioned such that the measurements are accurate and free from noise and disturbances. In this context, many researchers have utilized recent technological advances in wearable sensors and signal processing to develop smart and accurate wearable devices for clinical applications. The processing and analysis of physiological signals is a key issue for these smart wearable devices. Consequently, ongoing work in this field of study includes research on filtration, quality checking, signal transformation and decomposition, feature extraction and, most recently, machine learning-based methods
Heterogeneous data fusion for brain psychology applications
This thesis aims to apply Empirical Mode Decomposition (EMD), Multiscale Entropy
(MSE), and collaborative adaptive filters for the monitoring of different brain
consciousness states. Both block based and online approaches are investigated, and
a possible extension to the monitoring and identification of Electromyograph (EMG)
states is provided.
Firstly, EMD is employed as a multiscale time-frequency data driven tool to
decompose a signal into a number of band-limited oscillatory components; its data
driven nature makes EMD an ideal candidate for the analysis of nonlinear and non-stationary
data. This methodology is further extended to process multichannel real
world data, by making use of recent theoretical advances in complex and multivariate
EMD. It is shown that this can be used to robustly measure higher order features
in multichannel recordings to robustly indicate ‘QBD’. In the next stage, analysis is
performed in an information theory setting on multiple scales in time, using MSE.
This enables an insight into the complexity of real world recordings. The results of
the MSE analysis and the corresponding statistical analysis show a clear difference
in MSE between the patients in different brain consciousness states. Finally, an
online method for the assessment of the underlying signal nature is studied. This
method is based on a collaborative adaptive filtering approach, and is shown to be
able to approximately quantify the degree of signal nonlinearity, sparsity, and non-circularity
relative to the constituent subfilters. To further illustrate the usefulness
of the proposed data driven multiscale signal processing methodology, the final case
study considers a human-robot interface based on a multichannel EMG analysis.
A preliminary analysis shows that the same methodology as that applied to the
analysis of brain cognitive states gives robust and accurate results.
The analysis, simulations, and the scope of applications presented suggest
great potential of the proposed multiscale data processing framework for feature extraction
in multichannel data analysis. Directions for future work include further development
of real-time feature map approaches and their use across brain-computer
and brain-machine interface applications
A general dual-pathway network for EEG denoising
IntroductionScalp electroencephalogram (EEG) analysis and interpretation are crucial for tracking and analyzing brain activity. The collected scalp EEG signals, however, are weak and frequently tainted with various sorts of artifacts. The models based on deep learning provide comparable performance with that of traditional techniques. However, current deep learning networks applied to scalp EEG noise reduction are large in scale and suffer from overfitting.MethodsHere, we propose a dual-pathway autoencoder modeling framework named DPAE for scalp EEG signal denoising and demonstrate the superiority of the model on multi-layer perceptron (MLP), convolutional neural network (CNN) and recurrent neural network (RNN), respectively. We validate the denoising performance on benchmark scalp EEG artifact datasets.ResultsThe experimental results show that our model architecture not only significantly reduces the computational effort but also outperforms existing deep learning denoising algorithms in root relative mean square error (RRMSE)metrics, both in the time and frequency domains.DiscussionThe DPAE architecture does not require a priori knowledge of the noise distribution nor is it limited by the network layer structure, which is a general network model oriented toward blind source separation
Motion Artifact Processing Techniques for Physiological Signals
The combination of reducing birth rate and increasing life expectancy continues to drive
the demographic shift toward an ageing population and this is placing an ever-increasing
burden on our healthcare systems. The urgent need to address this so called healthcare
\time bomb" has led to a rapid growth in research into ubiquitous, pervasive and
distributed healthcare technologies where recent advances in signal acquisition, data
storage and communication are helping such systems become a reality. However, similar
to recordings performed in the hospital environment, artifacts continue to be a major
issue for these systems. The magnitude and frequency of artifacts can vary signicantly
depending on the recording environment with one of the major contributions due to
the motion of the subject or the recording transducer. As such, this thesis addresses
the challenges of the removal of this motion artifact removal from various physiological
signals.
The preliminary investigations focus on artifact identication and the tagging of physiological
signals streams with measures of signal quality. A new method for quantifying
signal quality is developed based on the use of inexpensive accelerometers which facilitates
the appropriate use of artifact processing methods as needed. These artifact
processing methods are thoroughly examined as part of a comprehensive review of the
most commonly applicable methods. This review forms the basis for the comparative
studies subsequently presented. Then, a simple but novel experimental methodology
for the comparison of artifact processing techniques is proposed, designed and tested
for algorithm evaluation. The method is demonstrated to be highly eective for the
type of artifact challenges common in a connected health setting, particularly those concerned
with brain activity monitoring. This research primarily focuses on applying the
techniques to functional near infrared spectroscopy (fNIRS) and electroencephalography
(EEG) data due to their high susceptibility to contamination by subject motion related
artifact.
Using the novel experimental methodology, complemented with simulated data, a comprehensive
comparison of a range of artifact processing methods is conducted, allowing
the identication of the set of the best performing methods. A novel artifact removal
technique is also developed, namely ensemble empirical mode decomposition with canonical
correlation analysis (EEMD-CCA), which provides the best results when applied on
fNIRS data under particular conditions. Four of the best performing techniques were
then tested on real ambulatory EEG data contaminated with movement artifacts comparable
to those observed during in-home monitoring.
It was determined that when analysing EEG data, the Wiener lter is consistently
the best performing artifact removal technique. However, when employing the fNIRS
data, the best technique depends on a number of factors including: 1) the availability
of a reference signal and 2) whether or not the form of the artifact is known. It is
envisaged that the use of physiological signal monitoring for patient healthcare will grow
signicantly over the next number of decades and it is hoped that this thesis will aid in
the progression and development of artifact removal techniques capable of supporting
this growth
Recommended from our members
Optimised use of independent component analysis for EEG signal processing
Electroencephalography (EEG) is the prevalent technique for monitoring brain function. It employs a set of electrodes on the scalp to measure the electrical activity of the brain. EEG is mainly used by researchers to study the brain’s responses to a specific stimulus - the event-related potentials (ERPs). Different types of unwanted signals, which are known as artefacts, usually mix with the EEG at any point during the recording process. As the amplitudes of the EEG and ERPs are very small (in the order of microvolts), they can be buried in the artefacts which have very high amplitudes in the order of millivolts. Therefore, contamination of EEG activity by the artefacts can degrade the quality of the EEG recording and may cause error in EEG/ERP signal interpretation. Several EEG artefact removal methods already exist in the literature and these previous studies have concentrated on manual or automatic detection of either one or, of a few types of EEG artefacts. Among the proposed methods, Independent Component Analysis (ICA) based techniques are commonly applied to successfully detect the artefacts. Different types of ICA algorithms have been developed, which aim to estimate the individual sources of a linearly mixed signal. However, the estimation criterion differs across various ICA algorithms, which may deliver different results
- …