Algorithms and VLSI architectures for parametric additive synthesis

A parametric additive synthesis approach to sound synthesis is advantageous as it can model sounds in a large scale manner, unlike the classical sinusoidal additive based synthesis paradigms. It is known that a large body of naturally occurring sounds are resonant in character and thus fit the concept well. This thesis is concerned with the computational optimisation of a super class of form ant synthesis which extends the sinusoidal parameters with a spread parameter known as band width. Here a modified formant algorithm is introduced which can be traced back to work done at IRCAM, Paris. When impulse driven, a filter based approach to modelling a formant limits the computational work-load. It is assumed that the filter's coefficients are fixed at initialisation, thus avoiding interpolation which can cause the filter to become chaotic. A filter which is more complex than a second order section is required. Temporal resolution of an impulse generator is achieved by using a two stage polyphase decimator which drives many filterbanks. Each filterbank describes one formant and is composed of sub-elements which allow variation of the formant’s parameters. A resource manager is discussed to overcome the possibility of all sub- banks operating in unison. All filterbanks for one voice are connected in series to the impulse generator and their outputs are summed and scaled accordingly. An explorative study of number systems for DSP algorithms and their architectures is investigated. I invented a new theoretical mechanism for multi-level logic based DSP. Its aims are to reduce the number of transistors and to increase their functionality. A review of synthesis algorithms and VLSI architectures are discussed in a case study between a filter based bit-serial and a CORDIC based sinusoidal generator. They are both of similar size, but the latter is always guaranteed to be stable

Radix-2n serial–serial multipliers

All serial–serial multiplication structures previously reported in the literature have been confined to bit serial–serial multipliers. An architecture for digit serial–serial multipliers is presented. A set of designs are derived from the radix-2n design procedure, which was first reported by the authors for the design of bit level pipelined digit serial–parallel structures. One significant aspect of the new designs is that they can be pipelined to the bit level and give the designer the flexibility to obtain the best trade-off between throughput rate and hardware cost by varying the digit size and the number of pipelining levels. Also, an area-efficient digit serial–serial multiplier is proposed which provides a 50% reduction in hardware without degrading the speed performance. This is achieved by exploiting the fact that some cells are idle for most of the multiplication operation. In the new design, the computations of these cells are remapped to other cells, which make them redundant. The new designs have been implemented on the S40BG256 device from the SPARTAN family to prove functionality and assess performance

Systolic VLSI chip for implementing orthogonal transforms, A

Includes bibliographical references.This paper describes the design of a systolic VLSI chip for the implementation of signal processing algorithms that may be decomposed into a product of simple real rotations. These include orthogonal transformations. Applications of this chip include projections, discrete Fourier and cosine transforms, and geometrical transformations. Large transforms may be computed by "tiling" together many chips for increased throughput. A CMOS VLSI chip containing 138 000 transistors in a 5x3 array of rotators has been designed, fabricated, and tested. The chip has a 32-MHz clock and performs real rotations at a rate of 30 MHz. The systolic nature of the chip makes use of fully synchronous bit-serial interconnect and a very regular structure at the rotator and bit levels. A distributed arithmetic scheme is used to implement the matrix-vector multiplication of the rotation.This work was supported by Ball Aerospace, Boulder, CO, and by the Office of Naval Research, Electronics Branch, Arlington, VA, under Contract ONR 85-K-0693

Application specific serial arithmetic arrays

High performance systolic arrays of serial-parallel multiplier elements may be rapidly constructed for specific applications by applying hardware description language techniques to a library of full-custom CMOS building blocks. Single clock pre-charged circuits have been implemented for these arrays at clock rates in excess of 100 Mhz using economical 2-micron (minimum feature size) CMOS processes, which may be quickly configured for a variety of applications. A number of application-specific arrays are presented, including a 2-D convolver for image processing, an integer polynomial solver, and a finite-field polynomial solver