Characterization and Emulation of Low-Voltage Power Line Channels for Narrowband and Broadband Communication

The demand for smart grid and smart home applications has raised the recent interest in power line communication (PLC) technologies, and has driven a broad set of deep surveys in low-voltage (LV) power line channels. This book proposes a set of novel approaches, to characterize and to emulate LV power line channels in the frequency range from0.15to 10 MHz, which closes gaps between the traditional narrowband (up to 500 kHz) and broadband (above1.8 MHz) ranges

Characterization and Emulation of Low-Voltage Power Line Channels for Narrowband and Broadband Communication

The demand for smart grid and smart home applications has raised the recent interest in power line communication (PLC) technologies, and has driven a broad set of deep surveys in low-voltage (LV) power line channels. This book proposes a set of novel approaches, to characterize and to emulate LV power line channels in the frequency range from0.15to 10 MHz, which closes gaps between the traditional narrowband (up to 500 kHz) and broadband (above1.8 MHz) ranges

Noise Characterization and Emulation for Low-Voltage Power Line Channels between 150 kHz and 10 MHz

Characterization and emulation of power line noise have attracted interest since long, in both narrowband and broadband applications. Based on existing models, this paper presents a systematic approach to extract and parameterize each subtype of low-voltage (LV) power line noise between 150 kHz and 10 MHz. Based on the characterization, a FPGA-based emulator is proposed to emulate power line noise scenarios flexibly. A LV power line noise measuring platform is also presented with sample measurements and their emulation

Emulation of Narrowband Powerline Data Transmission Channels and Evaluation of PLC Systems

This work proposes advanced emulation of the physical layer behavior of NB-PLC channels and the application of a channel emulator for the evaluation of NB-PLC systems. In addition, test procedures and reference channels are proposed to improve efficiency and accuracy in the system evaluation and classification. This work shows that the channel emulator-based solution opens new ways toward flexible, reliable and technology-independent performance assessment of PLC modems

Scalable WDM phase regeneration in a single phase-sensitive amplifier through optical time lenses

Scalable solutions for data regeneration of multiple parallel channels are elusive. Here the authors report a scalable wavelength-division multiplexing technique for phase regeneration and demonstrate the highest reported number of regenerated wavelength-division multiplexed channels in a single phase regenerator

Characterization and Emulation of Low-Voltage Power Line Channels for Narrowband and Broadband Communication

This thesis proposes a set of novel approaches to characterize and to emulate LV power line channels in the frequency range from 0.15 to 10MHz, which close gaps between the traditional narrowband (up to 500 kHz) and broadband (above 1.8MHz) ranges

Fifty Years of Noise Modeling and Mitigation in Power-Line Communications.

Building on the ubiquity of electric power infrastructure, power line communications (PLC) has been successfully used in diverse application scenarios, including the smart grid and in-home broadband communications systems as well as industrial and home automation. However, the power line channel exhibits deleterious properties, one of which is its hostile noise environment. This article aims for providing a review of noise modeling and mitigation techniques in PLC. Specifically, a comprehensive review of representative noise models developed over the past fifty years is presented, including both the empirical models based on measurement campaigns and simplified mathematical models. Following this, we provide an extensive survey of the suite of noise mitigation schemes, categorizing them into mitigation at the transmitter as well as parametric and non-parametric techniques employed at the receiver. Furthermore, since the accuracy of channel estimation in PLC is affected by noise, we review the literature of joint noise mitigation and channel estimation solutions. Finally, a number of directions are outlined for future research on both noise modeling and mitigation in PLC

Development of a Wideband PLC Channel Emulator with Random Noise Scenarios

Channel emulators are an integral part of the test equipment that offers a more practical approach to testing new communication devices. It is imperative though to develop the emulator such that it best represents the channel. For PLC channel emulator, the channel representation can be either topdown or bottom-up. In this paper, the top-down characterisation and reference channels are used. In this approach, statistical measurements of the characteristics of the power line were conducted, and the closest mathematical representation is presented. The emulator operates in the frequency domain utilising 4096 transform points for the FFT process and 14 fractional bits for fixed point presentation. This number of bits allowed the emulator to sufficiently generate an average of 0.4% error between the software simulation results and the hardware test results. The input signal is converted to an LVDS signal by the FMC151 which serves as the AFE of the emulator. Two linear regulators block are used to convert both the negative and positive values of the input signal. The random generation of noise reduced the taxing efforts of adding different combinations of noise thus providing ease in focusing on the analysis of the resulting waveform

Calibration of Free-Space Radiometric Partial Discharge Measurements

The present study addresses the calibration of four types of partial discharge (PD) emulators used in the development of a PD Wireless Sensor Network (WSN). Three PD emulators have been constructed: a floating-electrode emulator, and two internal PD emulators. Both DC and AC high-voltage power supplies are used to initiate PD, which is measured using concurrent free-space radiometry (FSR) and a galvanic contact method based on the IEC 60270 standard. The emulators have been measured and simulated, and a good agreement has been found for the radiated fields. A new method of estimating the absolute PD activity level from radiometric measurements is proposed

Wi-Fi Denial of Service Attack on Wired Analog RF Channel Emulator

This report presents the design and implementation of an analog wireless channel emulator to examine various denial of service attacks in multiple mobile scenarios. The scenarios emulated in this project involve three node topologies of wireless interferers (Wi-Fi radios), including a software defined radio that transmits one of three denial of service (DoS) waveforms. The testbed was functional and met the original specifications. Results from mobile experiments show a clear distinction in performance among the three DoS waveforms depending on the node topology; a digital waveform using binary phase shift keying (BPSK) is most effective at reducing total network throughput at close range while sweep waveforms exhibit minor throughput reduction from a greater distance