No Communication Nodes Synchronization for a Low Power Consumption MAC Protocol in WSN based on IR-UWB

Synchronization is an important issue in multi hops Wireless Sensor Networks (WSN). Such networks are known by their limited resources of energy, storage, computation, and bandwidth. In addition if the networks entities are deployed with high density, it makes the synchronization mandatory for these networks. Impulse Radio Ultra Wide Band (IR-UWB) technology is a promising solution for this kind of networks due to its various advantages such as its robustness to severe multipath fading even in indoor environments, its low cost, low complexity, and low power consumption. To exploit the specific features of this technology, we need a convenient MAC protocol. WideMac was presented as a new low power consumption MAC protocol designed for WSN using IR-UWB transceivers. Because of the luck of synchronization in this protocol, this paper presents a solution for the synchronization problem especially in the case of no communication between the Network’s nodes. To implement and evaluate the proposed synchronization mechanism, we used MiXiM platform under OMNet++ Simulator

An Overview on Wireless Sensor Networks Technology and Evolution

Wireless sensor networks (WSNs) enable new applications and require non-conventional paradigms for protocol design due to several constraints. Owing to the requirement for low device complexity together with low energy consumption (i.e., long network lifetime), a proper balance between communication and signal/data processing capabilities must be found. This motivates a huge effort in research activities, standardization process, and industrial investments on this field since the last decade. This survey paper aims at reporting an overview of WSNs technologies, main applications and standards, features in WSNs design, and evolutions. In particular, some peculiar applications, such as those based on environmental monitoring, are discussed and design strategies highlighted; a case study based on a real implementation is also reported. Trends and possible evolutions are traced. Emphasis is given to the IEEE 802.15.4 technology, which enables many applications of WSNs. Some example of performance characteristics of 802.15.4-based networks are shown and discussed as a function of the size of the WSN and the data type to be exchanged among nodes

Ultra Low Power Communication Protocols for UWB Impulse Radio Wireless Sensor Networks

This thesis evaluates the potential of Ultra Wideband Impulse Radio for wireless sensor network applications. Wireless sensor networks are collections of small electronic devices composed of one or more sensors to acquire information on their environment, an energy source (typically a battery), a microcontroller to control the measurements, process the information and communicate with its peers, and a radio transceiver to enable these communications. They are used to regularly collect information within their deployment area, often for very long periods of time (up to several years). The large number of devices often considered, as well as the long deployment durations, makes any manual intervention complex and costly. Therefore, these networks must self-configure, and automatically adapt to changes in their electromagnetic environment (channel variations, interferers) and network topology modifications: some nodes may run out of energy, or suffer from a hardware failure. Ultra Wideband Impulse Radio is a novel wireless technology that, thanks to its extremely large bandwidth, is more robust to frequency dependent propagation effects. Its impulsional nature makes it robust to multipath fading, as the short duration of the pulses leads most multipath components to arrive isolated. This technology should also enable high precision ranging through time of flight measurements, and operate at ultra low power levels. The main challenge is to design a system that reaches the same or higher degree of energy savings as existing narrowband systems considering all the protocol layers. As these radios are not yet widely available, the first part of this thesis presents Maximum Pulse Amplitude Estimation, a novel approach to symbol-level modeling of UWB-IR systems that enabled us to implement the first network simulator of devices compatible with the UWB physical layer of the IEEE 802.15.4A standard for wireless sensor networks. In the second part of this thesis, WideMac, a novel ultra low power MAC protocol specifically designed for UWB-IR devices is presented. It uses asynchronous duty cycling of the radio transceiver to minimize the power consumption, combined with periodic beacon emissions so that devices can learn each other's wake-up patterns and exchange packets. After an analytical study of the protocol, the network simulation tool presented in the first part of the thesis is used to evaluate the performance of WideMac in a medical body area network application. It is compared to two narrowband and an FM-UWB solutions. The protocol stack parameters are optimized for each solution, and it is observed that WideMac combined to UWB-IR is a credible technology for such applications. Similar simulations, considering this time a static multi-hop network are performed. It is found that WideMac and UWB-IR perform as well as a mature and highly optimized narrowband solution (based on the WiseMAC ULP MAC protocol), despite the lack of clear channel assessment functionality on the UWB radio. The last part of this thesis studies analytically a dual mode MAC protocol named WideMac-High Availability. It combines the Ultra Low PowerWideMac with the higher performance Aloha protocol, so that ultra low power consumption and hence long deployment times can be combined with high performance low latency communications when required by the application. The potential of this scheme is quantified, and it is proposed to adapt it to narrowband radio transceivers by combining WiseMAC and CSMA under the name WiseMAC-HA

Diseños de capa cruzada para redes inalámbricas de área corporal energéticamente eficientes: una revisión

RESUMEN: El diseño de capa cruzada se considera una poderosa alternativa para dar solución a las complejidades introducidas por las comunicaciones inalámbricas en redes de área corporal (WBAN), donde el modelo clásico de comunicaciones no ha exhibido un desempeño adecuado. Respecto al problema puntual de consumo de energía, hemos preparado la presente revisión de las publicaciones más relevantes que tratan la eficiencia energética para WBAN usando diseño de capa cruzada. En este artículo se proporciona una revisión exhaustiva de los avances en aproximaciones, protocolos y optimizaciones de capa cruzada cuyo objetivo es incrementar el tiempo de vida de las redes WBAN mediante el ahorro de energía. Luego, se discute los aspectos relevantes y deficiencias de las técnicas de capa cruzada energéticamente eficientes. Además, se introducen aspectos de investigación abiertos y retos en el diseño de capa cruzada para WBAN. En esta revisión proponemos una taxonomía de las aproximaciones de capa cruzada, de modo que las técnicas revisadas se ajustan en categorías de acuerdo a los protocolos involucrados en el diseño. Una clasificación novedosa se incluye para hacer claridad en los conceptos teóricos involucrados en cada esquema de capa cruzada y para luego agrupar aproximaciones similares evidenciando las diferencias con otras técnicas entre sí. Nuestras conclusiones consideran los aspectos de movilidad y modelamiento del canal en escenarios de WBAN como las direcciones para futura investigación en WBAN y en aplicaciones de telemedicina.ABSTRACT: Cross-layer design is considered a powerful alternative to solve the complexities of wireless communication in wireless body area networks (WBAN), where the classical communication model has been shown to be inaccurate. Regarding the energy consumption problem, we have prepared a current survey of the most relevant scientific publications on energy-efficient cross-layer design for WBAN. In this paper, we provide a comprehensive review of the advances in cross-layer approaches, protocols and optimizations aimed at increasing the network lifetime by saving energy in WBANs. Subsequently, we discuss the relevant aspects and shortcomings of these energy-efficient cross-layer techniques and point out the open research issues and challenges in WBAN cross-layer design. In this survey, we propose a taxonomy for cross-layer approaches to fit them into categories based on the protocols involved in the cross-layer scheme. A novel classification is included to clarify the theoretical concepts behind each cross-layer scheme; and to group similar approaches by establishing their differences from the other strategies reviewed. Our conclusion considers the aspects of mobility and channel modeling in WBAN scenarios as the directions of future cross-layer research for WBAN and telemedicine applications

Wireless Techniques for Body-Centric Cooperative Communications

Body-centric and cooperative communications are new trends in telecommunications field. Being concerned with human behaviour, body-centric communication networks, also known as Wireless Body Area Networks (WBANs), are suitable for a wide variety of applications. The advances in the miniaturisation of embedded devices to be placed on or around the body, foster the diffusion of these systems, where the human body is the key element defining communication characteristics. Cooperative communications paradigm, on the other hand, is one of the emerging technologies that promises significantly higher reliability and spectral efficiency in wireless networks. This thesis investigates possible applications of the cooperative communication paradigm to body-centric networks and, more generally, to Wireless Sensor Networks (WSNs). Firstly, communication protocols for WBANs are in the spotlight. Performance achieved by different approaches is evaluated and compared through experimentation providing guidelines for choosing appropriate protocol and setting protocol parameters to meet application requirements. Secondly, a cooperative Multiple Input Multiple Output (MIMO) scheme for WBANs is presented. The scheme, named B-MIMO, exploits the natural heterogeneity of the WBAN propagation channel to improve energy efficiency of the system. Finally, a WSN scenario is considered, where sensor nodes cooperate to establish a massive MIMO-like system. The analysis and subsequent optimisation show the advantages of cooperation in terms of energy efficiency and provide insights on how many nodes should be deployed in such a scenario

Routing in heterogeneous wireless ad hoc networks

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 2008.Includes bibliographical references (p. 135-146).Wireless ad hoc networks are used in several applications ranging from infrastructure monitoring to providing Internet connectivity to remote locations. A common assumption about these networks is that the devices that form the network are homogeneous in their capabilities. However in reality, the networks can be heterogeneous in the capabilities of the devices. The main contribution of this thesis is the identification of issues for efficient communication in heterogeneous networks and the proposed solutions to these issues. The first part of the thesis deals with the issues of unambiguous classification of devices and device identification in ad hoc networks. A taxonomical approach is developed, which allows devices with wide range of capabilities to be classified on the basis of their functionality. Once classified, devices are characterized on the basis of different attributes. An IPv6 identification scheme and two routing services based on this scheme that allow object-object communication are developed. The identification scheme is extended to a multi-addressing scheme for wireless ad hoc networks. These two issues and the developed solutions are applicable to a broad range of heterogeneous networks. The second part of the thesis deals with heterogeneous networks consisting of omnidirectional and directional antennas. A new MAC protocol for directional antennas, request-to-pause-directional-MAC (RTP-DMAC) protocol is developed that solves the deafness issue, which is common in networks with directional antennas. Three new routing metrics, which are extensions to the expected number of transmissions (ETX) metric are developed. The first metric, ETX1, reduces the route length by increasing the transmission power. The routing and MAC layers assume the presence of bidirectional links for their proper operation. However networks with omnidirectional and directional antennas have unidirectional links. The other two metrics, unidirectional-ETX (U-ETX) and unidirectional-ETX1 (U-ETX1), increase the transmission power of the directional nodes so that the unidirectional links appear as bidirectional links at the MAC and the routing layers. The performance of these metrics in different scenarios is evaluated.by Sivaram M.S.L. Cheekiralla.Ph.D

A self-healing framework for WSNs : detection and recovery of faulty sensor nodes and unreliable wireless links

Proponemos un marco conceptual para acoplar técnicas de auto-organización y técnicas de autocuración. A este marco se le llama de auto-curación y es capaz de hacer frente a enlaces inalámbricos inestables y nodos defectuosos. Dividimos el marco en dos componentes principales: la auto-organización y auto-curación. En el componente de auto-organización, nosotros construimos una topología de árbol que determine las rutas hacia el sumidero. En el componente de auto-curación, la topología del árbol se adapta a ambos tipos de fallas siguiendo tres pasos: recopilación de información, detección de fallas, y la recuperación de fallos. En el paso de recopilación de información, los nodos determinan el estado actual de la red mediante la recopilación de información de la capa MAC. En el paso de detección de fallas, los nodos analizan la información recopilada y detectan nodos/enlaces defectuosos. En el paso de recuperación de fallos, los nodos recuperan la topología del árbol mediante la sustitución de componentes defectuosos con redundantes (es decir, componentes de respaldo). Este marco permite una red con resiliencia que se recupera sin agotar los recursos de la red.We propose a conceptual framework for putting together self-organizing and self-healing techniques. This framework is called the self-healing framework and it is capable of coping with unstable wireless links and faulty nodes. We divide the framework into two major components: selforganization and self-healing. In the self-organization component, we build a tree topology that determines routing paths towards the sink. In the self-healing component, the tree topology copes with both types of failures by following three steps: information collection, fault detection, and fault recovery. In the information collection step, the nodes determine the current status of the network by gathering information from the MAC layer. In the fault detection step, the nodes analyze the collected information and detect faulty nodes/links. In the fault recovery step, the nodes recover the tree topology by replacing the faulty components with redundant ones (i.e., backup components). This framework allows a resilient network that recovers itself without depleting the network resources.Doctor en IngenieríaDoctorad

Development of a Random Time-Frequency Access Protocol for M2M Communication

This thesis focuses on the design and development of the random time-frequency access protocol in Machine-to-Machine (M2M) communication systems and covers different aspects of the data collision problem in these systems. The randomisation algorithm, used to access channels in the frequency domain, represents the key factor that affects data collisions. This thesis presents a new randomisation algorithm for the channel selection process for M2M technologies. The new algorithm is based on a uniform randomisation distribution and is called the Uniform Randomisation Channel Selection Technique (URCST). This new channel selection algorithm improves system performance and provides a low probability of collision with minimum complexity, power consumption, and hardware resources. Also, URCST is a general randomisation technique which can be utilised by different M2M technologies. The analysis presented in this research confirms that using URCST improves system performance for different M2M technologies, such as Weightless-N and Sigfox, with a massive number of devices. The thesis also provides a rigorous and flexible mathematical model for the random time-frequency access protocol which can precisely describe the performance of different M2M technologies. This model covers various scenarios with multiple groups of devices that employ different transmission characteristics like the number of connected devices, the number of message copies, the number of channels, the payload size, and transmission time. In addition, new and robust simulation testbeds have been built and developed in this research to evaluate the performance of different M2M technologies that utilise the random time-frequency access protocol. These testbeds cover the channel histogram, the probability of collisions, and the mathematical model. The testbeds were designed to support the multiple message copies approach with various groups of devices that are connected to the same base station and employ different transmission characteristics. Utilising the newly developed channel selection algorithm, mathematical model, and testbeds, the research offers a detailed and thorough analysis of the performance of Weightless-N and Sigfox in terms of the message lost ratio (MLR) and power consumption. The analysis shows some useful insights into the performance of M2M systems. For instance, while using multiple message copies improves the system performance, it might degrade the reliability of the system as the number of devices increases beyond a specific limit. Therefore, increasing the number of message copies can be disadvantageous to M2M communication performance