Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

From MARTE to dynamically reconfigurable FPGAs : Introduction of a control extension in a model based design flow

System-on-Chip (SoC) can be considered as a particular case of embedded systems and has rapidly became a de-facto solution for implement- ing these complex systems. However, due to the continuous exponential rise in SoC's design complexity, there is a critical need to find new seamless method- ologies and tools to handle the SoC co-design aspects. This paper addresses this issue and proposes a novel SoC co-design methodology based on Model Driven Engineering (MDE) and the MARTE (Modeling and Analysis of Real-Time and Embedded Systems) standard proposed by OMG (Object Management Group), in order to raise the design abstraction levels. Extensions of this standard have enabled us to move from high level specifications to execution platforms such as reconfigurable FPGAs; and allow to implement the notion of Partial Dy- namic Reconfiguration supported by current FPGAs. The overall objective is to carry out system modeling at a high abstraction level expressed in UML (Unified Modeling Language); and afterwards, transform these high level mod- els into detailed enriched lower level models in order to automatically generate the necessary code for final FPGA synthesis

Design and resource management of reconfigurable multiprocessors for data-parallel applications

FPGA (Field-Programmable Gate Array)-based custom reconfigurable computing machines have established themselves as low-cost and low-risk alternatives to ASIC (Application-Specific Integrated Circuit) implementations and general-purpose microprocessors in accelerating a wide range of computation-intensive applications. Most often they are Application Specific Programmable Circuiits (ASPCs), which are developer programmable instead of user programmable. The major disadvantages of ASPCs are minimal programmability, and significant time and energy overheads caused by required hardware reconfiguration when the problem size outnumbers the available reconfigurable resources; these problems are expected to become more serious with increases in the FPGA chip size. On the other hand, dominant high-performance computing systems, such as PC clusters and SMPs (Symmetric Multiprocessors), suffer from high communication latencies and/or scalability problems. This research introduces low-cost, user-programmable and reconfigurable MultiProcessor-on-a-Programmable-Chip (MPoPC) systems for high-performance, low-cost computing. It also proposes a relevant resource management framework that deals with performance, power consumption and energy issues. These semi-customized systems reduce significantly runtime device reconfiguration by employing userprogrammable processing elements that are reusable for different tasks in large, complex applications. For the sake of illustration, two different types of MPoPCs with hardware FPUs (floating-point units) are designed and implemented for credible performance evaluation and modeling: the coarse-grain MIMD (Multiple-Instruction, Multiple-Data) CG-MPoPC machine based on a processor IP (Intellectual Property) core and the mixed-mode (MIMD, SIMD or M-SIMD) variant-grain HERA (HEterogeneous Reconfigurable Architecture) machine. In addition to alleviating the above difficulties, MPoPCs can offer several performance and energy advantages to our data-parallel applications when compared to ASPCs; they are simpler and more scalable, and have less verification time and cost. Various common computation-intensive benchmark algorithms, such as matrix-matrix multiplication (MMM) and LU factorization, are studied and their parallel solutions are shown for the two MPoPCs. The performance is evaluated with large sparse real-world matrices primarily from power engineering. We expect even further performance gains on MPoPCs in the near future by employing ever improving FPGAs. The innovative nature of this work has the potential to guide research in this arising field of high-performance, low-cost reconfigurable computing. The largest advantage of reconfigurable logic lies in its large degree of hardware customization and reconfiguration which allows reusing the resources to match the computation and communication needs of applications. Therefore, a major effort in the presented design methodology for mixed-mode MPoPCs, like HERA, is devoted to effective resource management. A two-phase approach is applied. A mixed-mode weighted Task Flow Graph (w-TFG) is first constructed for any given application, where tasks are classified according to their most appropriate computing mode (e.g., SIMD or MIMD). At compile time, an architecture is customized and synthesized for the TFG using an Integer Linear Programming (ILP) formulation and a parameterized hardware component library. Various run-time scheduling schemes with different performanceenergy objectives are proposed. A system-level energy model for HERA, which is based on low-level implementation data and run-time statistics, is proposed to guide performance-energy trade-off decisions. A parallel power flow analysis technique based on Newton\u27s method is proposed and employed to verify the methodology

A Hardware Implementation of a Run-Time Scheduler for Reconfigurable Systems

New generation embedded systems demand high performance, efficiency and flexibility. Reconfigurable hardware can provide all these features. However the costly reconfiguration process and the lack of management support have prevented a broader use of these resources. To solve these issues we have developed a scheduler that deals with task-graphs at run-time, steering its execution in the reconfigurable resources while carrying out both prefetch and replacement techniques that cooperate to hide most of the reconfiguration delays. In our scheduling environment task-graphs are analyzed at design-time to extract useful information. This information is used at run-time to obtain near-optimal schedules, escaping from local-optimum decisions, while only carrying out simple computations. Moreover, we have developed a hardware implementation of the scheduler that applies all the optimization techniques while introducing a delay of only a few clock cycles. In the experiments our scheduler clearly outperforms conventional run-time schedulers based on As-Soon-As-Possible techniques. In addition, our replacement policy, specially designed for reconfigurable systems, achieves almost optimal results both regarding reuse and performance

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

Design and application of reconfigurable circuits and systems

Open Acces

A unified hardware/software runtime environment for FPGA-based reconfigurable computers using BORPH

Fulltext linkThis paper explores the design and implementation of BORPH, an operating system designed for FPGA-based reconfigurable computers. Hardware designs execute as normal UNIX processes under BORPH, having access to standard OS services, such as file system support. Hardware and software components of user designs may, therefore, run as communicating processes within BORPH's runtime environment. The familiar language independent UNIX kernel interface facilitates easy design reuse and rapid application development. To develop hardware designs, a Simulink-based design flow that integrates with BORPH is employed. Performances of BORPH on two on-chip systems implemented on a BEE2 platform are compared. © 2008 ACM.link_to_subscribed_fulltex

Dynamic Processor Reconfiguration for Power, Performance and Reliability Management

Technology advancements allowed more transistors to be packed in a smaller area, while the improved performance helped in achieving higher clock frequencies. This, unfortunately led to a power density problem, forcing processor industry to lower the clock frequency and integrate multiple cores on the same die. Depending on core characteristics, the multiple cores in the die could be symmetric or asymmetric. Asymmetric multi-core processors (AMPs) have been proposed as an alternative to symmetric multi-cores to improve power efficiency. AMPs comprise of cores that implement the same ISA, but differ in performance and power characteristics due to varying sizes of micro-architectural resources. As the computational bottleneck of a workload shifts from one resource to another during its course of execution, reassigning it to another core (where it runs more efficiently), can improve the overall power efficiency. Thus achieving high power efficiency in AMPs requires (i) a diverse set of cores that are optimized for various program phases, (ii) runtime analysis to determine the best core to run on, and (iii) low overhead of re-assigning a thread to a different core type. Decisions to swap threads between AMPs are made at coarse grain granularity of millions of instructions, to mitigate the impact of thread migration overhead. But the computational needs of the program rapidly change during the course of its execution. The best core configuration for an application such that, both power consumption and performance are optimized, changes over time rapidly at fine granularity of thousands of instructions. This dissertation explores ways to design core micro-architecture such that high power efficiency could be achieved, if switching overhead could be lowered, enabling fine grain switching. To take advantage of power saving opportunities at fine grain granularity, this thesis explores reconfigurable/morphable architectures where core resources are reconfigured on demand to suit the needs of the executing application. At first, we explore reconfigurable architectures consisting of two kinds of cores: out-of-order (OOO) big cores and in-order (InO) small cores. The big cores provide higher performance while the small cores are more power efficient. In this proposed architecture, OOO core reconfigures into InO core at run time. Our proposed online management scheme decides to switch between these core types such that we obtain significant power benefits without impacting performance. We also observe that, resource requirements of applications can be quite diverse and consequently, resource bottlenecks or excesses can vary considerably. Thus, reconfiguration between just two core modes may not fully exploit power and performance improvement opportunities. We therefore, explore reconfigurable architectures consisting of diverse core types that not limited to big and little cores. A single core can reconfigure into multiple core modes where each mode has unique power and performance characteristics. Workload performance on a particular core mode depends on a large set of processor resources. Some workloads are highly memory intensive, some exhibit large instruction dependency, some experience high rates of branch mis-prediction, while other workloads exhibit large exploitable instruction level parallelism. A diverse set of core modes is needed, that could address shifting resource needs during various program phases of an application. Different trade-offs in power and performance could be achieved by reducing or expanding the size of various resource. Trade-offs for each core mode are also affected by operating voltage and frequency. We therefore, propose joint core resource resizing with dynamic voltage and frequency scaling (DVFS), which is important for applications whose performance is sensitive to changes in frequency. Thus, at fine granularity, the core should adapt to varying instruction window sizes, execution bandwidth and frequency to meet the demands of the workload at run-time to improve power efficiency. Many current processors employ DVFS aggressively to improve power efficiency and maximize performance. This dissertation studies the tradeoff in power efficiency in using fine grain DVFS and reconfigurable architectures mentioned above.We also explore another important problem due to continued scaling of devices which results in higher vulnerability to soft-errors. We consider dynamic core reconfiguration from the perspectives of both power efficiency and vulnerability to soft-errors. An online management scheme is proposed such that core reconfiguration upon a thread switch not only improves power efficiency but also does not increase the vulnerability to soft errors. In summary, we propose in this thesis several solutions for improving power efficiency by integrating heterogeneity within the core. We also address how popular power reduction techniques like DVFS are comparable to our approach. Finally, we address reliability challenges along with improving power efficiency