A method for extracting respiratory frequency during blood pressure measurement, from oscillometric cuff pressure pulses and Korotkoff sounds recorded during the measurement

Respiratory frequency is an important physiological feature commonly used to assess health. However, the current measurements involve dedicated devices which not only increase the medical cost but also make health monitoring inconvenient. Earlier studies have shown that respiratory frequency could be extracted from electrocardiography (ECG) signal, but little was done to assess the possibility of extracting respiratory frequency from oscillometric cuff pressure pulses (OscP) or Korotkoff sounds (KorS), which are normally used for measuring blood pressure and more easily accessible than the ECG signal. This study presented a method to extract respiratory frequency from OscP and KorS during clinical blood pressure measurement. The method was evaluated with clinical data collected from 15 healthy participants, and its measurement accuracy was compared with a reference respiratory rate obtained with a magnetometer. Experimental results showed small non-significant mean absolute bias (0.019 Hz for OscP and 0.024 Hz for KorS) and high correlation (0.7 for both OscP and KorS) between the reference respiratory frequency and respiratory frequency extracted from OscP or KorS, indicating the high reliability of extracting respiratory frequency from OscP and KorS during normal blood pressure measurement

Effect of Respiration on the Characteristic Ratios of Oscillometric Pulse Amplitude Envelope in Blood Pressure Measurement

Systolic and diastolic blood pressures (BPs) are important physiological parameters for disease diagnosis. Systolic and diastolic characteristic ratios derived from oscillometric pulse waveform have been widely used to estimate automated non-invasive BPs in oscillometric BP measurement devices. The oscillometric pulse waveform is easily influenced by respiration, which may cause variability to the characteristic ratios and subsequently BP measurement. This study quantitatively investigated how respiration patterns (i.e., normal breathing and deep breathing) affect the systolic and diastolic characteristic ratios. The study was performed with clinical data collected from 39 healthy subjects, and each subject conducted BP measurements during normal and deep breathings. Analytical results showed that the systolic characteristic ratio increased significantly from 0.52 ± 0.13 under normal breathing to 0.58 ± 0.14under deep breathing (p < 0.05), and the diastolic characteristic ratio was not significantly affected from 0.75 ± 0.12 under normal breathing to 0.76 ± 0.13 under deep breathing (p = 0.48). In conclusion, deep breathing significantly affected the systolic characteristic ratio, suggesting that automated oscillometric BP device which is validated under resting condition should be strictly used for measurements under resting condition

Pulse interval modulation-based method to extract the respiratory rate from oscillometric cuff pressure waveform during blood pressure measurement

Respiratory frequency has been extensively used to assess health status. This study aimed to evaluate two methods of extracting the respiratory rate from oscillometric cuff pressure pulses (OscP) during blood pressure (BP) measurement, which was compared with reference respiration signal (Resp). OscP and Resp were simultaneously recorded on 20 healthy subjects during the linear cuff deflation period of BP measurement. Reference Resp was obtained from a chest magnetometer and OscP from an electronic pressure sensor connected to the cuff. Two de-modulation methods were developed by using the peak or valley positions of the OscP waveform to measure pulse intervals, from which the respiration modulation signal was derived. Statistical analysis showed that, in comparison with the Resp, there was no significant difference (-0.001 Hz for the peak-based method, and 0.001 Hz for valley-based method), and their corresponding limits of agreement were -0.08 Hz to 0.08 Hz and -0.10 Hz to 0.11 Hz, respectively. There was also a high correlation between Resp and respiratory frequencies extracted from OscP waveform, with the correlation coefficients of 0.7 for both methods. In conclusion, the present work demonstrated that, during BP measurement, respiratory frequency can be accurately derived from using either peak or valley point to characterize pulse intervals

Recent development of respiratory rate measurement technologies

Respiratory rate (RR) is an important physiological parameter whose abnormity has been regarded as an important indicator of serious illness. In order to make RR monitoring simple to do, reliable and accurate, many different methods have been proposed for such automatic monitoring. According to the theory of respiratory rate extraction, methods are categorized into three modalities: extracting RR from other physiological signals, RR measurement based on respiratory movements, and RR measurement based on airflow. The merits and limitations of each method are highlighted and discussed. In addition, current works are summarized to suggest key directions for the development of future RR monitoring methodologies

Cuff-free blood pressure estimation using signal processing techniques

Since blood pressure is a significant parameter to examine people's physical attributes and it is useful to indicate cardiovascular diseases, the measurement/estimation of blood pressure has gained increasing attention. The continuous, cuff-less and non-invasive blood pressure estimation is required for the daily health monitoring. In recent years, studies have been focusing on the ways of blood pressure estimation based on other physiological parameters. It is widely accepted that the pulse transit time (PTT) is related to arterial stiffness, and can be used to estimate blood pressure. A promising signal processing technology, Hilbert-Huang Transform (HHT), is introduced to analyze both ECG and PPG data, which are applied to calculate PTT. The relationship between blood pressure and PTT is illustrated, and the problems of calibration and re-calibration are also discussed. The proposed algorithm is tested based on the continuous data from MIMIC database. To verify the algorithm, the HHT algorithm is compared with other used processing technique (wavelet transform). The accuracy is calculated to validate the method. Furthermore, we collect data using our own developed system and test our algorithm

Early Disease Detection by Extracting Features of Biomedical Signals

Elderly people face a lot of health problems in day to day life due to old age and so many reasons. Therefore a regular health check-up is needed for them which is much more expensive and cannot be afforded by many people. Again the diagnosis is much more complicated to understand and in many cases there is a chance of mistreatment. There is another chance of delay in the detection of disease and late treatment causing risk in their lives. So, the disease should be detected in the early stage for lower cost and lower risk in life. The present work is related to the different physiological parameters of a human being that are to be measured to accurately diagnose the related disease. Though there are numerous physiological parameters, this work emphasizes on some of the most common physiological parameters such as blood pressure, heart rate and ECG which are of primary importance to elderly people. Accurate measurement and analysis of these parameters can lead to diagnose of several lethal disease. In this work, the method of measurement and analysis of these physiological parameters are described. The simulation, processing and analyses of these signals are also done in the work. The prime objective of the research work is to analyze and extract the features of ECG signal and blood pressure signal for early diagnosis of life threatening diseases

Non-invasive blood pressure estimation based on electro/phonocardiogram

Ingeniero (a) ElectrónicoPregrad

Advances in non-invasive blood pressure measurement techniques

Hypertension, or elevated blood pressure (BP), is a marker for many cardiovascular diseases and can lead to life threatening conditions such as heart failure, coronary artery disease and stroke. Several techniques have recently been proposed and investigated for non-invasive BP monitoring. The increasing desire for telemonitoring solutions that allow patients to manage their own conditions from home has accelerated the development of new BP monitoring techniques. In this review, we present the recent progress in non-invasive blood pressure monitoring solutions emphasizing clinical validation and trade-offs between available techniques. We introduce the current BP measurement techniques with their underlying operating principles. New promising proof-of-concept studies are presented and recent modeling and machine learning approaches for improved BP estimation are summarized. This aids discussions on how new BP monitors should evaluated in order to bring forth new home monitoring solutions in wearable form factor. Finally, we discuss on unresolved challenges in making convenient, reliable and validated BP monitoring solutions.</p

딥러닝 기반 혈압 예측 기법

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 윤성로.While COVID-19 is changing the world's social profile, it is expected that the telemedicine sector, which has not been activated due to low regulation and reliability, will also undergo a major change. As COVID-19 spreads in the United States, the US Department of Health \& Human Services temporarily loosens the standards for telemedicine, while enabling telemedicine using Facebook, Facebook Messenger-based video chat, Hangouts, and Skype. The expansion of the telemedicine market is expected to quickly transform the existing treatment-oriented hospital-led medical market into a digital healthcare service market focused on prevention and management through wearables, big data, and health records analysis. In this prevention and management-oriented digital healthcare service, it is very important to develop a technology that can easily monitor a person's health status. One of the vital signs that can be used for personal health monitoring is blood pressure. High BP is a common and dangerous condition. About 1 out of 3 adults in the U.S. (about 75 million people) have high BP. This common condition increases the risk of heart disease and stroke, two of the leading causes of death for Americans. High BP is called the silent killer because it often has no warning signs or symptoms, and many people are not aware they have it. For these reasons, it is important to develop a technology that can easily and conveniently check BP regularly. In biomedical data analysis, various studies are being attempted to effectively analyze by applying machine learning to biomedical big data accumulated in large quantities. However, collecting blood pressure-related data at the level of big data is very difficult and very expensive because it takes a lot of manpower and time. So in this dissertation, we proposed a three-step strategy to overcome these issues. First, we describe a BP prediction model with extraction and concentration CNN architecture, to process publicly disclosed sequential ECG and PPG dataset. Second, we evaluate the performance of the developed model by applying the developed model to privately measured data. To address the third issue, we propose the knowledge distillation method and input pre-processing method to improve the accuracy of the blood pressure prediction model. All the methods proposed in this dissertation are based on a deep convolutional neural network (CNN). Unlike other studies based on manual recognition of the features, by utilizing the advantage of deep learning which automatically extracts features, raw biomedical signals are used intact to reflect the inherent characteristics of the signals themselves.코로나 19에 의한 전 세계의 사회적 프로필 변화로, 규제와 신뢰성이 낮기 때문에 활성화 되지 않은 원격 의료 분야도 큰 변화를 겪을 것으로 예상됩니다. 코로나 19가 미국에 퍼짐에 따라 미국 보건복지부는 원격 진료의 표준을 일시적으로 완화하면서 페이스북, 페이스북 메신저 기반 화상 채팅, 행아웃, 스카이프를 사용한 원격 진료를 가능하게 했습니다. 원격의료 시장의 확장은 기존의 치료중심 병원주도의 의료시장을 웨어러블, 빅 데이터 및 건강기록 분석을 통한 예방 및 관리에 중점을 둔 디지털 의료 서비스 시장으로 빠르게 변화시킬 것으로 예상됩니다. 이러한 예방 및 관리 중심의 디지털 헬스케어 서비스에서는 사람의 건강 상태를 쉽게 모니터링 할 수 있는 기술 개발이 매우 중요한데 혈압은 개인 건강 모니터링에 사용될 수 있는 필수 징후 중 하나 입니다. 고혈압은 아주 흔하고 위험한 질환입니다. 미국 성인 3명중 1명(약 7,500만명)이 고혈압을 가지고 있습니다. 이는 미국인의 주요 사망 원인 중 두가지인 심장질환과 뇌졸중의 위험을 증가 시킵니다. 고혈압은 신체에 경고 신호나 자각 증상이 없어 많은 사람들이 자신이 고혈압인 것을 인지하지 못하기 때문에 "사일런트 킬러"라 불리웁니다. 이러한 이유로 정기적으로 쉽고 편리하게 혈압을 확인할 수 있는 기술의 개발이 매우 중요합니다. 생체의학 데이터 분석 분야에서는 머신 러닝을 대량으로 수집된 생체의학 빅 데이터에 적용하는 다양한 연구가 효과적으로 이루어지고 있습니다. 그러나 빅 데이터 수준으로 다량의 혈압 관련 데이터를 수집하는 것은 많은 전문적인 인력들이 오랜시간을 필요로 하기 때문에 매우 어렵고 비용 또한 많이 필요합니다. 따라서 본 학위논문에서는 이러한 문제를 극복하기 위한 3단계 전략을 제안했습니다. 먼저 누구나 시용할 수 있도록 공개되어 있는 심전도, 광용적맥파 데이터셋을 이용, 순차적인 심전도, 광용적맥파 신호에서 혈압을 잘 예측하도록 고안된 추출 및 농축 작업을 반복하는 함성곱 신경망 구조를 제안했습니다. 두번째로 제안된 합성곱 신경망 모델을 개인에게서 측정한 광용적맥파 신호를 이용해 제안된 함성곱 신경망 모델의 성능을 평가했습니다. 세번째로 혈압예측 모델의 정확성을 높이기 위해 지식 증류법과 입력신호 전처리 방법을 제안했습니다. 이 논문에서 제안된 모든 혈압예측 방법은 합성곱 신경망을 기반으로 합니다. 혈압 예측에 필요한 특징들을 수동으로 추출해야 하는 다른 연구들과 다르게 특징을 자동으로 추출하는 딥러닝의 장점을 활용, 아무런 처리도 하지 않은 원래 그대로의 생체 신호에서 신호 자체의 고유한 특징을 반영할 수 있습니다.1 Introduction 1 2 Background 5 2.1 Cuff-based BP measurement methods 9 2.1.1 Auscultatory method 9 2.1.2 Oscillometric method 10 2.1.3 Tonometric method 11 2.2 Biomedical signals used in cuffless BP prediction methods 13 2.2.1 Electrocardiography (ECG) 13 2.2.2 Photoplethysmography (PPG) 20 2.3 Cuffless BP measurement methods 21 2.3.1 PWV based BP prediction methods 25 2.3.2 Machine learning based pulse wave analysis methods 26 2.4 Deep learning for sequential biomedical data 30 2.4.1 Convolutional neural networks 31 2.4.2 Recurrent neural networks 32 3 End-to-end blood pressure prediction via fully convolutional networks 33 3.1 Introduction 35 3.2 Method 38 3.2.1 Data preparation 38 3.2.2 CNN based prediction model 41 3.2.3 Detailed architecture 45 3.3 Experimental results 47 3.3.1 Setup 47 3.3.2 Model evaluation & selection 48 3.3.3 Calibration-based method 51 3.3.4 Performance comparison 52 3.3.5 Verification using international standards for BP measurement grading criteria 54 3.3.6 Performance comparison by the input signal combinations 56 3.3.7 An ablation study of each architectural component of extraction-concentration blocks 58 3.3.8 Preprocessing of input signal to improve blood pressure prediction performance 59 3.4 Discussion 61 3.5 Summary 63 4 Blood pressure prediction by a smartphone sensor using fully convolutional networks 64 4.1 Introduction 66 4.2 Method 69 4.2.1 Data acquisition 71 4.2.2 Preprocessing of the PPG signals 71 4.2.3 PPG signal selection 71 4.2.4 Data preparation for CNN model training 72 4.2.5 Network architectures 72 4.3 Experimental results 75 4.3.1 Implementation details 75 4.3.2 Effect of PPG combination on BP prediction 75 4.3.3 Performance comparison with other related works 76 4.3.4 Verification using international standards for BP measurement grading criteria 77 4.3.5 Preprocessing of input signal to improve blood pressure prediction performance 79 4.4 Discussion 81 4.5 Summary 83 5 Improving accuracy of blood pressure prediction by distilling the knowledge of neural networks 84 5.1 Introduction 85 5.2 Methods 87 5.3 Experimental results 88 5.4 Discussion & Summary 89 6 Conclusion 90 6.1 Future work 92 Bibliography 93 Abstract (In Korean) 106Docto