368 research outputs found
Joint Routing and STDMA-based Scheduling to Minimize Delays in Grid Wireless Sensor Networks
In this report, we study the issue of delay optimization and energy
efficiency in grid wireless sensor networks (WSNs). We focus on STDMA (Spatial
Reuse TDMA)) scheduling, where a predefined cycle is repeated, and where each
node has fixed transmission opportunities during specific slots (defined by
colors). We assume a STDMA algorithm that takes advantage of the regularity of
grid topology to also provide a spatially periodic coloring ("tiling" of the
same color pattern). In this setting, the key challenges are: 1) minimizing the
average routing delay by ordering the slots in the cycle 2) being energy
efficient. Our work follows two directions: first, the baseline performance is
evaluated when nothing specific is done and the colors are randomly ordered in
the STDMA cycle. Then, we propose a solution, ORCHID that deliberately
constructs an efficient STDMA schedule. It proceeds in two steps. In the first
step, ORCHID starts form a colored grid and builds a hierarchical routing based
on these colors. In the second step, ORCHID builds a color ordering, by
considering jointly both routing and scheduling so as to ensure that any node
will reach a sink in a single STDMA cycle. We study the performance of these
solutions by means of simulations and modeling. Results show the excellent
performance of ORCHID in terms of delays and energy compared to a shortest path
routing that uses the delay as a heuristic. We also present the adaptation of
ORCHID to general networks under the SINR interference model
Data Aggregation Scheduling in Wireless Networks
Data aggregation is one of the most essential data gathering operations in wireless networks. It is an efficient strategy to alleviate energy consumption and reduce medium access contention. In this dissertation, the data aggregation scheduling problem in different wireless networks is investigated. Since Wireless Sensor Networks (WSNs) are one of the most important types of wireless networks and data aggregation plays a vital role in WSNs, the minimum latency data aggregation scheduling problem for multi-regional queries in WSNs is first studied. A scheduling algorithm is proposed with comprehensive theoretical and simulation analysis regarding time efficiency. Second, with the increasing popularity of Cognitive Radio Networks (CRNs), data aggregation scheduling in CRNs is studied. Considering the precious spectrum opportunity in CRNs, a routing hierarchy, which allows a secondary user to seek a transmission opportunity among a group of receivers, is introduced. Several scheduling algorithms are proposed for both the Unit Disk Graph (UDG) interference model and the Physical Interference Model (PhIM), followed by performance evaluation through simulations. Third, the data aggregation scheduling problem in wireless networks with cognitive radio capability is investigated. Under the defined network model, besides a default working spectrum, users can access extra available spectrum through a cognitive radio. The problem is formalized as an Integer Linear Programming (ILP) problem and solved through an optimization method in the beginning. The simulation results show that the ILP based method has a good performance. However, it is difficult to evaluate the solution theoretically. A heuristic scheduling algorithm with guaranteed latency bound is presented in our further investigation. Finally, we investigate how to make use of cognitive radio capability to accelerate data aggregation in probabilistic wireless networks with lossy links. A two-phase scheduling algorithm is proposed, and the effectiveness of the algorithm is verified through both theoretical analysis and numerical simulations
Connected Dominating Set Based Topology Control in Wireless Sensor Networks
Wireless Sensor Networks (WSNs) are now widely used for monitoring and controlling of systems where human intervention is not desirable or possible. Connected Dominating Sets (CDSs) based topology control in WSNs is one kind of hierarchical method to ensure sufficient coverage while reducing redundant connections in a relatively crowded network. Moreover, Minimum-sized Connected Dominating Set (MCDS) has become a well-known approach for constructing a Virtual Backbone (VB) to alleviate the broadcasting storm for efficient routing in WSNs extensively. However, no work considers the load-balance factor of CDSsin WSNs. In this dissertation, we first propose a new concept — the Load-Balanced CDS (LBCDS) and a new problem — the Load-Balanced Allocate Dominatee (LBAD) problem. Consequently, we propose a two-phase method to solve LBCDS and LBAD one by one and a one-phase Genetic Algorithm (GA) to solve the problems simultaneously.
Secondly, since there is no performance ratio analysis in previously mentioned work, three problems are investigated and analyzed later. To be specific, the MinMax Degree Maximal Independent Set (MDMIS) problem, the Load-Balanced Virtual Backbone (LBVB) problem, and the MinMax Valid-Degree non Backbone node Allocation (MVBA) problem. Approximation algorithms and comprehensive theoretical analysis of the approximation factors are presented in the dissertation.
On the other hand, in the current related literature, networks are deterministic where two nodes are assumed either connected or disconnected. In most real applications, however, there are many intermittently connected wireless links called lossy links, which only provide probabilistic connectivity. For WSNs with lossy links, we propose a Stochastic Network Model (SNM). Under this model, we measure the quality of CDSs using CDS reliability. In this dissertation, we construct an MCDS while its reliability is above a preset applicationspecified threshold, called Reliable MCDS (RMCDS). We propose a novel Genetic Algorithm (GA) with immigrant schemes called RMCDS-GA to solve the RMCDS problem.
Finally, we apply the constructed LBCDS to a practical application under the realistic SNM model, namely data aggregation. To be specific, a new problem, Load-Balanced Data Aggregation Tree (LBDAT), is introduced finally. Our simulation results show that the proposed algorithms outperform the existing state-of-the-art approaches significantly
Connectivity, Coverage and Placement in Wireless Sensor Networks
Wireless communication between sensors allows the formation of flexible sensor networks, which can be deployed rapidly over wide or inaccessible areas. However, the need to gather data from all sensors in the network imposes constraints on the distances between sensors. This survey describes the state of the art in techniques for determining the minimum density and optimal locations of relay nodes and ordinary sensors to ensure connectivity, subject to various degrees of uncertainty in the locations of the nodes
Aggregation Scheduling Algorithms in Wireless Sensor Networks
In Wireless Sensor Networks which consist of tiny
wireless sensor nodes with limited battery power, one of the most
fundamental applications is data aggregation which collects nearby
environmental conditions and aggregates the data to a designated
destination, called a sink node. Important issues concerning the
data aggregation are time efficiency and energy consumption due
to its limited energy, and therefore, the related problem, named
Minimum Latency Aggregation Scheduling (MLAS), has been the
focus of many researchers. Its objective is to compute the minimum
latency schedule, that is, to compute a schedule with the minimum
number of timeslots, such that the sink node can receive the
aggregated data from all the other nodes without any collision or
interference. For the problem, the two interference models, the graph
model and the more realistic physical interference model known as
Signal-to-Interference-Noise-Ratio (SINR), have been adopted with
different power models, uniform-power and non-uniform power (with
power control or without power control), and different antenna
models, omni-directional antenna and directional antenna models.
In this survey article, as the problem has proven to be NP-hard,
we present and compare several state-of-the-art approximation
algorithms in various models on the basis of latency as its
performance measure
A survey on energy efficient techniques in wireless sensor networks
International audienceThe myriad of potential applications supported by wireless sensor networks (WSNs) has generated much interest from the research community. Various applications range from small size low industrial monitoring to large scale energy constrained environmental monitoring. In all cases, an operational network is required to fulfill the application missions. In addition, energy consumption of nodes is a great challenge in order to maximize network lifetime. Unlike other networks, it can be hazardous, very expensive or even impossible to charge or replace exhausted batteries due to the hostile nature of environment. Researchers are invited to design energy efficient protocols while achieving the desired network operations. This paper focuses on different techniques to reduce the consumption of the limited energy budget of sensor nodes. After having identified the reasons of energy waste in WSNs, we classify energy efficient techniques into five classes, namely data reduction, control reduction, energy efficient routing, duty cycling and topology control. We then detail each of them, presenting subdivisions and giving many examples. We conclude by a recapitulative table
A Survey on Wireless Sensor Network Security
Wireless sensor networks (WSNs) have recently attracted a lot of interest in
the research community due their wide range of applications. Due to distributed
nature of these networks and their deployment in remote areas, these networks
are vulnerable to numerous security threats that can adversely affect their
proper functioning. This problem is more critical if the network is deployed
for some mission-critical applications such as in a tactical battlefield.
Random failure of nodes is also very likely in real-life deployment scenarios.
Due to resource constraints in the sensor nodes, traditional security
mechanisms with large overhead of computation and communication are infeasible
in WSNs. Security in sensor networks is, therefore, a particularly challenging
task. This paper discusses the current state of the art in security mechanisms
for WSNs. Various types of attacks are discussed and their countermeasures
presented. A brief discussion on the future direction of research in WSN
security is also included.Comment: 24 pages, 4 figures, 2 table
Recommended from our members
Adding the reliability on tree based topology construction algorithms for wireless sensor networks
Topology control is a technique used in wireless sensor networks to maximize energy efficiency and network lifetime. In previous literature, many tree based techniques have been proposed to save energy and increase the network lifetime. In tree based algorithms, the most promising solution is the formation of a network backbone, which serves on behalf of rest of the nodes in the network and therefore leading towards Connected Dominating Set (CDS) formulation. However, one imminent problem with all tree based solution is a compromise on network reliability. Therefore, to address reliability issues in tree based solutions, in this paper, we propose Poly3 which maintains cliques of size three in order to achieve network reliability on top of the CDS algorithm. This makes the network more robust to link removal. Our empirical and mathematical analysis reveals that Poly3 provides better reliability than algorithms of the same kind
Recommended from our members
Graph-theoretic channel modeling and topology control protocols for wireless sensor networks
This report addresses two different research problems: (i) It presents a wireless channel model that reduces the complexity associated with high order Markov chains; and (ii) presents energy efficient topology control protocols which provide reliability while maintaining the topology in an energy efficient manner. For the above problems, real wireless sensor network traces were collected and extensive simulations were performed for evaluating the proposed protocols.
Accurate simulation and analysis of wireless networks are inherently dependent on accurate models which are able to provide real-time channel characterization. High-order Markov chains are typically used to model errors and losses over wireless channels. However, complexity (i.e., the number of states) of a high-order Markov model increases exponentially with the memory-length of the underlying channel.
In this report, a novel graph-theoretic methodology that uses Hamiltonian circuits to reduce the complexity of a high-order Markov model to a desired state budget is presented. The implication of unused states in complexity reduction of higher order Markov model is also explained. The trace-driven performance evaluations for real wireless local area network (WLAN) and wireless sensor network (WSN) channels demonstrate that the proposed Hamiltonian Model, while providing orders of magnitude reduction in complexity, renders an accuracy that is comparable to the Markov model and better than the existing reduced state models.
Furthermore, a methodology to preserve energy is presented to increase the network lifetime by reducing the node degree forming an active backbone while considering network connectivity. However, in energy stringent wireless sensor networks, it is of utmost importance to construct the reduced topology with the minimal control overhead. Moreover, most wireless links in practice are lossy links with connectivity probability which desires that a routing protocol provides routing flexibility and reliability at a minimum energy consumption cost. For this purpose, distributed and semi-distributed novel graph-theoretic topology construction protocols are presented that exploit cliques and polygons in a WSN to achieve energy efficiency and reliability. The proposed protocols also facilitate load rotation under topology maintenance, thereby extending the network lifetime. In addition to the above, the report also evaluates why the backbone construction using connected dominating set (CDS) in certain cases remains unable to provide connected sensing coverage in the area covered. For this purpose, a novel protocol that reduces the topology while considering sensing area coverage is presented
- …