LOW POWER ASIC IMPLEMENTATION OF A 256 BIT KEY AES CRYPTO-PROCESSOR AT 45NM TECHNOLOGY

Advanced Encryption Standard (AES), has received significant interest over the past decade due to its performance and security level. Low power devices have gained extreme importance in market today. Power dissipation is one of the most important design constraints to be handled well. A key to successful power management is automatic power reduction. This enables designers to meet their power budgets without adversely affecting their productivity or time to market. In this paper power gating techniques applied on AES crypto-processor is depicted. The goal of power gating is to minimize leakage power by temporarily cutting power off to selective blocks that are not required in the current operation. This AES design was implemented using Verilog HDL and synthesized with Synopsys DC Compiler using Nangate 45 nm open cell library, physical design implementation and power gating was performed using SOC Encounter and achieved a power reduction up to 40%

Implementation of AES with Time Complexity Measurement for Various Input

Network Security has a major role in the development of data communication system, where more randomization in the secret keys increases the security as well as the complexity of the cryptography algorithms. In the recent years network security has become an important issue. Cryptography has come up as a solution which plays a vital role in the information security system against various attacks. This security mechanism uses the AES algorithm to scramble data into unreadable text which can only be decrypted with the associated key. The AES algorithm is limited only for text as an input. It also has, the more time complexity. So it suffers from vulnerabilities associated with another type of input and time constraints. So its challenge to implement the AES algorithm for various types of input and require less decryption time. The propose work demonstrate implementation of a 128-bit Advanced Encryption Standard (AES), which consists of both symmetric key encryption and decryption algorithms for input as a text, image and audio. It also gives less time complexity as compared to existing one. At the last stage comparing the time complexity for encryption and decryption process for all three types of input. This paper also demonstrates a side channel attack on the standard software implementation of the AES cryptographic algorithm.d

A low cost advance encryption standard (AES) co-processor implementation

The need for privacy has become a major priority for both governments and civilians desiring protection from signal interception. Widespread use of personal communications devices has only increased demand for a level of security on previously insecure communications. This paper presents a novel low-cost architecture for the Advanced Encryption Standard (AES) algorithm utilizing a field programmable gate array (FPGA). In as much as possible, this architecture uses a bit-serial approach, and it is also suitable for VLSI implementations. In this implementation, the primary objective was not to increase throughput or decrease latency, but to balance these factors in order to lower the cost. A focus on low cost resulted in a design well-suited for SoC implementations. This allows for scaling of the architecture towards vulnerable portable and cost-sensitive communications devices in consumer and military applications.Facultad de Informátic

VLSI implementation of AES algorithm

In the present era of information processing through computers and access of private information over the internet like bank account information even the transaction of money, business deal through video conferencing, encryption of the messages in various forms has become inevitable. There are mainly two types of encryption algorithms, private key (also called symmetric key having single key for encryption and decryption) and public key (separate key for encryption and decryption). In the present work, hardware optimization for AES architecture has been done in different stages. The hardware comparison results show that as AES architecture has critical path delay of 9.78 ns when conventional s-box is used, whereas it has critical path delay of 8.17 ns using proposed s-box architecture. The total clock cycles required to encrypt 128 bits of data using proposed AES architecture are 86 and therefore, throughput of the AES design in Spartan-6 of Xilinx FPGA is approximately 182.2 Mbits/s. To achieve the very high speed, full custom design of s-box in composite field has been done for the proposed s-box architecture in Cadence Virtuoso. The novel XOR gate is proposed for use in s-box design which is efficient in terms of delay and power along with high noise margin. The implementation has been done in 180 nm UMC technology. Total dynamic power in the proposed XOR gate is 0.63 µW as compared to 5.27 µW in the existing design of XOR. The designed s-box using proposed XOR occupies a total area of 27348 µm2. The s-box chip consumes 22.6 µW dynamic power and has 8.2 ns delay after post layout simulation has been performed

Studies on high-speed hardware implementation of cryptographic algorithms

Cryptographic algorithms are ubiquitous in modern communication systems where they have a central role in ensuring information security. This thesis studies efficient implementation of certain widely-used cryptographic algorithms. Cryptographic algorithms are computationally demanding and software-based implementations are often too slow or power consuming which yields a need for hardware implementation. Field Programmable Gate Arrays (FPGAs) are programmable logic devices which have proven to be highly feasible implementation platforms for cryptographic algorithms because they provide both speed and programmability. Hence, the use of FPGAs for cryptography has been intensively studied in the research community and FPGAs are also the primary implementation platforms in this thesis. This thesis presents techniques allowing faster implementations than existing ones. Such techniques are necessary in order to use high-security cryptographic algorithms in applications requiring high data rates, for example, in heavily loaded network servers. The focus is on Advanced Encryption Standard (AES), the most commonly used secret-key cryptographic algorithm, and Elliptic Curve Cryptography (ECC), public-key cryptographic algorithms which have gained popularity in the recent years and are replacing traditional public-key cryptosystems, such as RSA. Because these algorithms are well-defined and widely-used, the results of this thesis can be directly applied in practice. The contributions of this thesis include improvements to both algorithms and techniques for implementing them. Algorithms are modified in order to make them more suitable for hardware implementation, especially, focusing on increasing parallelism. Several FPGA implementations exploiting these modifications are presented in the thesis including some of the fastest implementations available in the literature. The most important contributions of this thesis relate to ECC and, specifically, to a family of elliptic curves providing faster computations called Koblitz curves. The results of this thesis can, in their part, enable increasing use of cryptographic algorithms in various practical applications where high computation speed is an issue