368 research outputs found
WIMAX Basics from PHY Layer to Scheduling and Multicasting Approaches
WiMAX (Worldwide Interoperability for Microwave Access) is an emerging broadband wireless technology for providing Last mile solutions for supporting higher bandwidth and multiple service classes with various quality of service requirement. The unique architecture of the WiMAX MAC and PHY layers that uses OFDMA to allocate multiple channels with different modulation schema and multiple time slots for each channel allows better adaptation of heterogeneous user’s requirements. The main architecture in WiMAX uses PMP (Point to Multipoint), Mesh mode or the new MMR (Mobile Multi hop Mode) deployments where scheduling and multicasting have different approaches. In PMP SS (Subscriber Station) connects directly to BS (Base Station) in a single hop route so channel conditions adaptations and supporting QoS for classes of services is the key points in scheduling, admission control or multicasting, while in Mesh networks SS connects to other SS Stations or to the BS in a multi hop routes, the MMR mode extends the PMP mode in which the SS connects to either a relay station (RS) or to Bs. Both MMR and Mesh uses centralized or distributed scheduling with multicasting schemas based on scheduling trees for routing. In this paper a broad study is conducted About WiMAX technology PMP and Mesh deployments from main physical layers features with differentiation of MAC layer features to scheduling and multicasting approaches in both modes of operations
A Survey on Scheduling in IEEE 802.16 Mesh Mode
Cataloged from PDF version of article.IEEE 802.16 standard (also known as WiMAX)
defines the wireless broadband network technology which aims
to solve the so called last mile problem via providing high
bandwidth Internet even to the rural areas for which the cable
deployment is very costly. The standard mainly focuses on the
MAC and PHY layer issues, supporting two transmission modes:
PMP (Point-to-Multipoint) and mesh modes. Mesh mode is an
optional mode developed as an extension to PMP mode and it
has the advantage of having an improving performance as more
subscribers are added to the system using multi-hop routes. In
802.16 MAC protocol, mesh mode slot allocation and reservation
mechanisms are left open which makes this topic a hot research
area. Hence, the focus of this survey will mostly be on the mesh
mode, and the proposed scheduling algorithms and performance
evaluation methods
Physical and Link Layer Implications in Vehicle Ad Hoc Networks
Vehicle Ad hoc Networks (V ANET) have been proposed to provide safety on the
road and deliver road traffic information and route guidance to drivers along with
commercial applications. However the challenges facing V ANET are numerous. Nodes
move at high speeds, road side units and basestations are scarce, the topology is
constrained by the road geometry and changes rapidly, and the number of nodes peaks
suddenly in traffic jams. In this thesis we investigate the physical and link layers of
V ANET and propose methods to achieve high data rates and high throughput.
For the physical layer, we examine the use of Vertical BLAST (VB LAST) systems
as they provide higher capacities than single antenna systems in rich fading
environments. To study the applicability of VB LAST to VANET, a channel model was
developed and verified using measurement data available in the literature. For no to
medium line of sight, VBLAST systems provide high data rates. However the
performance drops as the line of sight strength increases due to the correlation between
the antennas. Moreover, the performance of VBLAST with training based channel
estimation drops as the speed increases since the channel response changes rapidly. To
update the channel state information matrix at the receiver, a channel tracking algorithm
for flat fading channels was developed. The algorithm updates the channel matrix thus
reducing the mean square error of the estimation and improving the bit error rate (BER).
The analysis of VBLAST-OFDM systems showed they experience an error floor due to
inter-carrier interference (lCI) which increases with speed, number of antennas
transmitting and number of subcarriers used. The update algorithm was extended to
VBLAST -OFDM systems and it showed improvements in BER performance but still
experienced an error floor. An algorithm to equalise the ICI contribution of adjacent
subcarriers was then developed and evaluated. The ICI equalisation algorithm reduces
the error floor in BER as more subcarriers are equalised at the expense of more
hardware complexity.
The connectivity of V ANET was investigated and it was found that for single lane
roads, car densities of 7 cars per communication range are sufficient to achieve high
connectivity within the city whereas 12 cars per communication range are required for
highways. Multilane roads require higher densities since cars tend to cluster in groups.
Junctions and turns have lower connectivity than straight roads due to disconnections at
the turns. Although higher densities improve the connectivity and, hence, the
performance of the network layer, it leads to poor performance at the link layer. The
IEEE 802.11 p MAC layer standard under development for V ANET uses a variant of
Carrier Sense Multiple Access (CSMA). 802.11 protocols were analysed
mathematically and via simulations and the results prove the saturation throughput of
the basic access method drops as the number of nodes increases thus yielding very low
throughput in congested areas. RTS/CTS access provides higher throughput but it
applies only to unicast transmissions. To overcome the limitations of 802.11 protocols,
we designed a protocol known as SOFT MAC which combines Space, Orthogonal
Frequency and Time multiple access techniques. In SOFT MAC the road is divided into
cells and each cell is allocated a unique group of subcarriers. Within a cell, nodes share
the available subcarriers using a combination of TDMA and CSMA. The throughput
analysis of SOFT MAC showed it has superior throughput compared to the basic access
and similar to the RTS/CTS access of 802.11
Recommended from our members
Cognitive MAC protocols for mobile Ad-Hoc networks
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The term of Cognitive Radio (CR) used to indicate that spectrum radio could be accessed dynamically and opportunistically by unlicensed users. In CR Networks, Interference between nodes, hidden terminal problem, and spectrum sensing errors are big issues to be widely discussed in the research field nowadays. To improve the performance of such kind of networks, this thesis proposes Cognitive Medium Access Control (MAC) protocols for Mobile Ad-Hoc Networks (MANETs). From the concept of CR, this thesis has been able to develop a cognitive MAC framework in which a cognitive process consisting of cognitive elements is considered, which can make efficient decisions to optimise the CR network. In this context, three different scenarios to maximize the secondary user's throughput have been proposed. We found that the throughput improvement depends on the transition probabilities. However, considering the past information state of the spectrum can dramatically increases the secondary user's throughput by up to 40%. Moreover, by increasing the number of channels, the throughput of the network can be improved about 25%. Furthermore, to study the impact of Physical (PHY) Layer errors on cognitive MAC layer in MANETs, in this thesis, a Sensing Error-Aware MAC protocols for MANETs has been proposed. The developed model has been able to improve the MAC layer performance under the challenge of sensing errors. In this context, the proposed model examined two sensing error probabilities: the false alarm probability and the missed detection probability. The simulation results have shown that both probabilities could be adapted to maintain the false alarm probability at certain values to achieve good results. Finally, in this thesis, a cooperative sensing scheme with interference mitigation for Cognitive Wireless Mesh Networks (CogMesh) has been proposed. Moreover, a prioritybased traffic scenario to analyze the problem of packet delay and a novel technique for dynamic channel allocation in CogMesh is presented. Considering each channel in the system as a sub-server, the average delay of the users' packets is reduced and the cooperative sensing scenario dramatically increases the network throughput 50% more as the number of arrival rate is increased
Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View
Small satellite systems enable whole new class of missions for navigation,
communications, remote sensing and scientific research for both civilian and
military purposes. As individual spacecraft are limited by the size, mass and
power constraints, mass-produced small satellites in large constellations or
clusters could be useful in many science missions such as gravity mapping,
tracking of forest fires, finding water resources, etc. Constellation of
satellites provide improved spatial and temporal resolution of the target.
Small satellite constellations contribute innovative applications by replacing
a single asset with several very capable spacecraft which opens the door to new
applications. With increasing levels of autonomy, there will be a need for
remote communication networks to enable communication between spacecraft. These
space based networks will need to configure and maintain dynamic routes, manage
intermediate nodes, and reconfigure themselves to achieve mission objectives.
Hence, inter-satellite communication is a key aspect when satellites fly in
formation. In this paper, we present the various researches being conducted in
the small satellite community for implementing inter-satellite communications
based on the Open System Interconnection (OSI) model. This paper also reviews
the various design parameters applicable to the first three layers of the OSI
model, i.e., physical, data link and network layer. Based on the survey, we
also present a comprehensive list of design parameters useful for achieving
inter-satellite communications for multiple small satellite missions. Specific
topics include proposed solutions for some of the challenges faced by small
satellite systems, enabling operations using a network of small satellites, and
some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications
Surveys and Tutorial
Energy-efficient diversity combining for different access schemes in a multi-path dispersive channel
Dissertação para obtenção do Grau de Doutor em
Engenharia Electrotécnica e ComputadoresThe forthcoming generation of mobile communications, 5G, will settle a new standard for a larger bandwidth and better Quality of Service (QoS). With the exploding growth rate of user generated data, wireless
standards must cope with this growth and at the same time be energy efficient to avoid depleting the batteries of wireless devices. Besides these issues, in a broadband wireless setting QoS can be severely affected from a multipath dispersive channel and therefore be energy demanding.
Cross-layered architectures are a good choice to enhance the overall performance of a wireless system.
Examples of cross-layered Physical (PHY) - Medium Access Control (MAC) architectures are type-II Diversity Combining (DC) Hybrid-ARQ (H-ARQ) and Multi-user Detection (MUD) schemes. Cross-layered type-II DC H-ARQ schemes reuse failed packet transmissions to enhance data reception on posterior retransmissions; MUD schemes reuse data information from previously collided packets on posterior retransmissions to enhance data reception. For a multipath dispersive channel, a PHY layer analytical
model is proposed for Single-Carrier with Frequency Domain Equalization (SC-FDE) that supports DC H-ARQ and MUD. Based on this analytical model, three PHY-MAC protocols are proposed. A crosslayered Time Division Multiple Access (TDMA) scheme that uses DC H-ARQ is modeled and its performance is studied in this document; the performance analysis shows that the scheme performs better with DC and achieves a better energy efficiency at the cost of a higher delay. A novel cross-layered prefix-assisted Direct-Sequence Code Division Multiple Access (DS-CDMA) scheme is proposed and modeled in this document, it uses principles of DC and MUD. This protocol performs better by means
of additional retransmissions, achieving better energy efficiency, at the cost of higher redundancy from a code spreading gain. Finally, a novel cross-layered protocol H-ARQ Network Division Multiple Access (H-NDMA) is proposed and modeled, where the combination of DC H-ARQ and MUD is used with the intent of maximizing the system capacity with a lower delay; system results show that the proposed scheme achieves better energy efficiency and a better performance at the cost of a higher number of retransmissions.
A comparison of the three cross-layered protocols is made, using the PHY analytical model, under normalized conditions using the same amount of maximum redundancy. Results show that the H-NDMA protocol, in general, obtains the best results, achieving a good performance and a good energy efficiency
for a high channel load and low Signal-to-Noise Ratio (SNR). TDMA with DC H-ARQ achieves the best energy efficiency, although presenting the worst delay. Prefix-assisted DS-CDMA in the other hand shows good delay results but presents the worst throughput and energy efficiency
Low-latency Networking: Where Latency Lurks and How to Tame It
While the current generation of mobile and fixed communication networks has
been standardized for mobile broadband services, the next generation is driven
by the vision of the Internet of Things and mission critical communication
services requiring latency in the order of milliseconds or sub-milliseconds.
However, these new stringent requirements have a large technical impact on the
design of all layers of the communication protocol stack. The cross layer
interactions are complex due to the multiple design principles and technologies
that contribute to the layers' design and fundamental performance limitations.
We will be able to develop low-latency networks only if we address the problem
of these complex interactions from the new point of view of sub-milliseconds
latency. In this article, we propose a holistic analysis and classification of
the main design principles and enabling technologies that will make it possible
to deploy low-latency wireless communication networks. We argue that these
design principles and enabling technologies must be carefully orchestrated to
meet the stringent requirements and to manage the inherent trade-offs between
low latency and traditional performance metrics. We also review currently
ongoing standardization activities in prominent standards associations, and
discuss open problems for future research
TDMAとDCFの組み合わせによるアドホックネットワーク上でのQoS通信の実現方式
An ad hoc network does not rely on the fixed network infrastructure; it uses a distributed network management method. With the popularity of the smart devices, ad hoc network has received more and more attention, supporting QoS in ad hoc network has become inevitable. Many researches have been done for provision of QoS in ad hoc networks. These researches can be divided into three types. The first type is contention-based approach which is the most widely used. IEEE 802.11e MAC (media access control) protocol belongs to this type which is an extension of IEEE 802.11 DCF(Distributed Coordination Function). It specifies a procedure to guarantee QoS by providing more transmission opportunities for high priority data. However, since IEEE 802.11eis designed based on the premise that access points are used, when the number of QoS flows increases, packet collisions could occur in multi-hop ad hoc network. The second type is using TDMA-based approach. The TDMA approach can provide contention-free access for QoS traffics through the appropriate time slot reservation. The current TDMA approaches reserve time slots for both QoS traffics and best-effort traffics. However, it is difficult for TDMA as the only approach to allocating channel access time for best-effort traffics sincet he required bandwidth of the best-effort traffics changes frequently. We propose a QoS scheme, which takes advantage of both contention-based approach and TDMA-based approach. In the proposed scheme, contention-based approach DCF provides easy and fair channel time for best-effort traffics, and TDMA approach serves the QoS traffics. A time frame structure is designed to manage the bandwidth allocation. A time frame is divided into two periods, specifically the TDMA periods and the DCF periods. The proportion of two periods is decided by QoS traffics. Therefore the QoS traffics are given absolutely higher priority than best-effort traffics. In order to guarantee the transmission of each QoS packet in TDMA period, a time slot assignment algorithm based on QoS data rate has been proposed. The proposed scheme also employs an admission control scheme, which rejects the new QoS user when the channel capacity is reached. In addition, we provide the configuration of the proposed scheme in the mobile environment. The procedures are designed for route changes and new-adding users. The proposed scheme is simulated in the QualNet simulator. In the static environment, the performance of the proposed scheme is evaluated in the case of a gradual increase in the number TCP flows and in the case of gradual increase in QoS data rate. Simulation results show that in the static environment the proposed scheme can not only provide effective QoS performance, but also can provide good support for best-effort flows. In the mobile environment, we simulated the performance of the proposed scheme at different moving speed (maximum is 5 Km/h) when the ARF (Auto Rate Fallback) is available. From the simulation results, in a specific mobile environment, the proposed scheme can support the QoS transmission well.電気通信大学201
- …