MIMO-UFMC Transceiver Schemes for Millimeter Wave Wireless Communications

The UFMC modulation is among the most considered solutions for the realization of beyond-OFDM air interfaces for future wireless networks. This paper focuses on the design and analysis of an UFMC transceiver equipped with multiple antennas and operating at millimeter wave carrier frequencies. The paper provides the full mathematical model of a MIMO-UFMC transceiver, taking into account the presence of hybrid analog/digital beamformers at both ends of the communication links. Then, several detection structures are proposed, both for the case of single-packet isolated transmission, and for the case of multiple-packet continuous transmission. In the latter situation, the paper also considers the case in which no guard time among adjacent packets is inserted, trading off an increased level of interference with higher values of spectral efficiency. At the analysis stage, the several considered detection structures and transmission schemes are compared in terms of bit-error-rate, root-mean-square-error, and system throughput. The numerical results show that the proposed transceiver algorithms are effective and that the linear MMSE data detector is capable of well managing the increased interference brought by the removal of guard times among consecutive packets, thus yielding throughput gains of about 10 - 13 $\%$. The effect of phase noise at the receiver is also numerically assessed, and it is shown that the recursive implementation of the linear MMSE exhibits some degree of robustness against this disturbance

VHDL design and simulation for embedded zerotree wavelet quantisation

This thesis discusses a highly effective still image compression algorithm – The Embedded Zerotree Wavelets coding technique, as it is called. This technique is simple but achieves a remarkable result. The image is wavelet-transformed, symbolically coded and successive quantised, therefore the compression and transmission/storage saving can be achieved by utilising the structure of zerotree. The algorithm was first proposed by Jerome M. Shapiro in 1993, however to minimise the memory usage and speeding up the EZW processor, a Depth First Search method is used to transverse across the image rather than Breadth First Search method as initially discussed in Shapiro\u27s paper (Shapiro, 1993). The project\u27s primary objective is to simulate the EZW algorithm from a basic building block of 8 by 8 matrix to a well-known reference image such Lenna of 256 by 256 matrix. Hence the algorithm performance can be measured, for instance its peak signal to noise ratio can be calculated. The software environment used for the simulation is a Very-High Speed Integrated Circuits - Hardware Description Language such Peak VHDL, PC based version. This will lead to the second phase of the project. The secondary objective is to test the algorithm at a hardware level, such FPGA for a rapid prototype implementation only if the project time permits

Spherical coding algorithm for wavelet image compression

PubMed ID: 19342336In recent literature, there exist many high-performance wavelet coders that use different spatially adaptive coding techniques in order to exploit the spatial energy compaction property of the wavelet transform. Two crucial issues in adaptive methods are the level of flexibility and the coding efficiency achieved while modeling different image regions and allocating bitrate within the wavelet subbands. In this paper, we introduce the "spherical coder," which provides a new adaptive framework for handling these issues in a simple and effective manner. The coder uses local energy as a direct measure to differentiate between parts of the wavelet subband and to decide how to allocate the available bitrate. As local energy becomes available at finer resolutions, i.e., in smaller size windows, the coder automatically updates its decisions about how to spend the bitrate. We use a hierarchical set of variables to specify and code the local energy up to the highest resolution, i.e., the energy of individual wavelet coefficients. The overall scheme is nonredundant, meaning that the subband information is conveyed using this equivalent set of variables without the need for any side parameters. Despite its simplicity, the algorithm produces PSNR results that are competitive with the state-of-art coders in literature.Publisher's VersionAuthor Post Prin

Efficiency in audio processing : filter banks and transcoding

Audio transcoding is the conversion of digital audio from one compressed form A to another compressed form B, where A and B have different compression properties, such as a different bit-rate, sampling frequency or compression method. This is typically achieved by decoding A to an intermediate uncompressed form, and then encoding it to B. A significant portion of the involved computational effort pertains to operating the synthesis filter bank, which is an important processing block in the decoding stage, and the analysis filter bank, which is an important processing block in the encoding stage. This thesis presents methods for efficient implementations of filter banks and audio transcoders, and is separated into two main parts. In the first part, a new class of Frequency Response Masking (FRM) filter banks is introduced. These filter banks are usually characterized by comprising a tree-structured cascade of subfilters, which have small individual filter lengths. Methods of complexity reduction are proposed for the scenarios when the filter banks are operated in single-rate mode, and when they are operated in multirate mode; and for the scenarios when the input signal is real-valued, and when it is complex-valued. An efficient variable bandwidth FRM filter bank is designed by using signed-powers-of-two reduction of its subfilter coefficients. Our design has a complexity an order lower than that of an octave filter bank with the same specifications. In the second part, the audio transcoding process is analyzed. Audio transcoding is modeled as a cascaded quantization process, and the cascaded quantization of an input signal is analyzed under different conditions, for the MPEG 1 Layer 2 and MP3 compression methods. One condition is the input-to-output delay of the transcoder, which is known to have an impact on the audio quality of the transcoded material. Methods to reduce the error in a cascaded quantization process are also proposed. An ultra-fast MP3 transcoder that requires only integer operations is proposed and implemented in software. Our implementation shows an improvement by a factor of 5 to 16 over other best known transcoders in terms of execution speed

Discrete Wavelet Transforms

The discrete wavelet transform (DWT) algorithms have a firm position in processing of signals in several areas of research and industry. As DWT provides both octave-scale frequency and spatial timing of the analyzed signal, it is constantly used to solve and treat more and more advanced problems. The present book: Discrete Wavelet Transforms: Algorithms and Applications reviews the recent progress in discrete wavelet transform algorithms and applications. The book covers a wide range of methods (e.g. lifting, shift invariance, multi-scale analysis) for constructing DWTs. The book chapters are organized into four major parts. Part I describes the progress in hardware implementations of the DWT algorithms. Applications include multitone modulation for ADSL and equalization techniques, a scalable architecture for FPGA-implementation, lifting based algorithm for VLSI implementation, comparison between DWT and FFT based OFDM and modified SPIHT codec. Part II addresses image processing algorithms such as multiresolution approach for edge detection, low bit rate image compression, low complexity implementation of CQF wavelets and compression of multi-component images. Part III focuses watermaking DWT algorithms. Finally, Part IV describes shift invariant DWTs, DC lossless property, DWT based analysis and estimation of colored noise and an application of the wavelet Galerkin method. The chapters of the present book consist of both tutorial and highly advanced material. Therefore, the book is intended to be a reference text for graduate students and researchers to obtain state-of-the-art knowledge on specific applications

A 2D DWT architecture suitable for the Embedded Zerotree Wavelet Algorithm

Digital Imaging has had an enormous impact on industrial applications such as the Internet and video-phone systems. However, demand for industrial applications is growing enormously. In particular, internet application users are, growing at a near exponential rate. The sharp increase in applications using digital images has caused much emphasis on the fields of image coding, storage, processing and communications. New techniques are continuously developed with the main aim of increasing efficiency. Image coding is in particular a field of great commercial interest. A digital image requires a large amount of data to be created. This large amount of data causes many problems when storing, transmitting or processing the image. Reducing the amount of data that can be used to represent an image is the main objective of image coding. Since the main objective is to reduce the amount of data that represents an image, various techniques have been developed and are continuously developed to increase efficiency. The JPEG image coding standard has enjoyed widespread acceptance, and the industry continues to explore its various implementation issues. However, recent research indicates multiresolution based image coding is a far superior alternative. A recent development in the field of image coding is the use of Embedded Zerotree Wavelet (EZW) as the technique to achieve image compression. One of The aims of this theses is to explain how this technique is superior to other current coding standards. It will be seen that an essential part orthis method of image coding is the use of multi resolution analysis, a subband system whereby the subbands arc logarithmically spaced in frequency and represent an octave band decomposition. The block structure that implements this function is termed the two dimensional Discrete Wavelet Transform (2D-DWT). The 20 DWT is achieved by several architectures and these are analysed in order to choose the best suitable architecture for the EZW coder. Finally, this architecture is implemented and verified using the Synopsys Behavioural Compiler and recommendations are made based on experimental findings

A CURE for noisy magnetic resonance images: Chi-square unbiased risk estimation

In this article we derive an unbiased expression for the expected mean-squared error associated with continuously differentiable estimators of the noncentrality parameter of a chi-square random variable. We then consider the task of denoising squared-magnitude magnetic resonance image data, which are well modeled as independent noncentral chi-square random variables on two degrees of freedom. We consider two broad classes of linearly parameterized shrinkage estimators that can be optimized using our risk estimate, one in the general context of undecimated filterbank transforms, and another in the specific case of the unnormalized Haar wavelet transform. The resultant algorithms are computationally tractable and improve upon state-of-the-art methods for both simulated and actual magnetic resonance image data.Comment: 30 double-spaced pages, 11 figures; submitted for publicatio