A Survey on Reconfigurable Microstrip Filter–Antenna Integration: Recent Developments and Challenges

Reconfigurable and tunable radio frequency (RF) and microwave (MW) components have become exciting topics for many researchers and design engineers in recent years. Reconfigurable microstrip filter–antenna combinations have been studied in the literature to handle multifunctional tasks for wireless communication systems. Using such devices can reduce the need for many RF components and minimize the cost of the whole wireless system, since the changes in the performance of these applications are achieved using electronic tuning techniques. However, with the rapid development of current fourth-generation (4G) and fifth-generation (5G) applications, compact and reconfigurable structures with a wide tuning range are in high demand. However, meeting these requirements comes with some challenges, namely the increased design complexity and system size. Accordingly, this paper aims to discuss these challenges and review the recent developments in the design techniques used for reconfigurable filters and antennas, as well as their integration. Various designs for different applications are studied and investigated in terms of their geometrical structures and operational performance. This paper begins with an introduction to microstrip filters, antennas, and filtering antennas (filtennas). Then, performance comparisons between the key and essential structures for these aspects are presented and discussed. Furthermore, a comparison between several RF reconfiguration techniques, current challenges, and future developments is presented and discussed in this review. Among several reconfigurable structures, the most efficient designs with the best attractive features are addressed and highlighted in this paper to improve the performance of RF and MW front end systems

Design and analysis of wideband passive microwave devices using planar structures

A selected volume of work consisting of 84 published journal papers is presented to demonstrate the contributions made by the author in the last seven years of his work at the University of Queensland in the area of Microwave Engineering. The over-arching theme in the author’s works included in this volume is the engineering of novel passive microwave devices that are key components in the building of any microwave system. The author’s contribution covers innovative designs, design methods and analyses for the following key devices and associated systems: Wideband antennas and associated systems Band-notched and multiband antennas Directional couplers and associated systems Power dividers and associated systems Microwave filters Phase shifters Much of the motivation for the work arose from the desire to contribute to the engineering o

Circuit Modelling of Bandpass/Channel Filter with Microstrip Implementation

This paper presents a step-by-step approach to the design of bandpass/channel filters. A 3-pole Chebyshev bandpass filter (BPF) with centre frequency of 2.6 GHz, fractional bandwidth of 3%, passband ripple of 0.04321 dB and return loss of 20 dB has been designed, implemented, and simulated. The designed filter implementation is based on the Rogers RT/Duroid 6010LM substrate with a 10.7 dielectric constant and 1.27 mm thickness. The BPF was also fabricated using the same substrate material used for the design simulation. The circuit model and microstrip layout results of the BPF are presented and show good agreement. The microstrip layout simulation results show that a less than 1.8 dB minimum insertion loss and a greater than 25 dB in-band return loss were achieved. The overall device size of the BPF is 18.0 mm by 10.7 mm, which is equivalent to 0.16λg x 0.09λg, where λg is the guided wavelength of the 50 Ohm microstrip line at the filter centre frequency

Ultrawideband and Multi-state Reconfigurable Antennas with Sum and Difference Radiation Patterns

Pattern diversity is a term used to describe the operation of several antenna elements working together to produce multiple different radiation patterns with the aim of improving the quality and reliability of a communications system. One useful implementation of pattern diversity considers sum and difference radiation patterns which can be exploited to extend high-gain space coverage and tackle multipath fading. The conventional forms of such pattern diversity antennas are generally working at a single or multiple narrowband frequencies and are designed for specific applications. Hence, generating sum and difference pattern diversity in wide range of frequencies requires the development of new pattern diversity antenna designs. Ultrawideband and frequency reconfigurable designs of pattern diversity antennas are desirable to help reduce the cost and increase the flexibility in applications of pattern diversity antennas. These two types of performances constitute the principal parts of this thesis. The first part of this thesis deals with the challenges of designing ultrawideband Vivaldi antennas with sum and difference radiation patterns. When two Vivaldi antennas are placed next to each other, two mutually exclusive phenomena of grating lobe generation at the highest end of frequency and mutual coupling at the lowest end of frequency will define the bandwidth. Hence, to enhance the bandwidth, the separation between the antenna elements is reduced, which delays the grating lobes generation, and the coupling at lower frequencies is mitigated by introducing an asymmetry in the design of each Vivaldi antenna element. It is shown that this method can be extended to multi-element Vivaldi antennas for higher gain. Next, the bandwidth is further enhanced by adding two vertical metal slabs between the antenna elements improving the isolation at lower frequencies. The proposed antennas use commercially available couplers as feeding networks. As a potential replacement for couplers, an out-of-phase power divider with unequal power division is also proposed. In the second part of this thesis, the pattern diversity function is combined with multistate frequency-reconfigurable filtering functions in a series of novel designs. In the first proposed design, two quasi-Yagi-Uda antennas are used for pattern diversity, while two switchable and reconfigurable bandpass-to-bandstop filters are used to excite the antenna elements. The whole system is excited by an external commercially available rat-race coupler. In a next step, this design is modified to attain wideband, tunable bandpass, and tunable bandstop operations while obviating the need for an external coupler by using three antenna elements excited by a switchable power divider. In another implementation, the filtering functions is extended to dual-band independently tunable bandpass and bandstop to excite wideband antennas. While all the former designs featured E-plane pattern diversity, in another design aiming at increasing space coverage, a switchable patch antennas with sum and difference radiation patterns in both E- and H-plane of the antenna is designed.Thesis (Ph.D.) -- University of Adelaide, School of Electrical and Electronic Engineering, 202

A Waveguide Slot Filtering Antenna With an Embedded Metamaterial Structure

A novel waveguide slot filtering antenna with an embedded metamaterial is presented. This filtering antenna consists of a common waveguide slot antenna with longitudinal slots cut on the top broad wall of its rectangular waveguide and a metamaterial surface embedded in the bottom broad wall. The metasurface replaces the conventional metal plane in the form of a bed of nails. In the operating frequency band, the metasurface works as a perfect electric conductor, so the antenna radiates as the traditional waveguide slot antennas. While in the stopband, the metasurface performs as a perfect magnetic conductor to suppress the propagation of electromagnetic wave in the waveguide cavity, so the interference signal is rejected and a filter function is achieved. To show the design process and verify its feasibility, a filtering antenna prototype working in the C-band and having a stopband in the X-band is designed, fabricated, and tested. A good agreement between simulation and measurement is obtained, demonstrating efficient radiations in the working band and a strong suppression of more than 35 dB in the stopband

Circuit modelling of bandpass/channel filter with microstrip implementation

This paper presents a step-by-step approach to the design of bandpass/channel filters. A 3-pole Chebyshev bandpass filter (BPF) with centre frequency of 2.6 GHz, fractional bandwidth of 3%, passband ripple of 0.04321 dB and return loss of 20 dB has been designed, implemented, and simulated. The designed filter implementation is based on the Rogers RT/Duroid 6010LM substrate with a 10.7 dielectric constant and 1.27 mm thickness. The BPF was also fabricated using the same substrate material used for the design simulation. The circuit model and microstrip layout results of the BPF are presented and show good agreement. The microstrip layout simulation results show that a less than 1.8 dB minimum insertion loss and a greater than 25 dB in-band return loss were achieved. The overall device size of the BPF is 18.0 mm by 10.7 mm, which is equivalent to 0.16λg x 0.09λg, where λg is the guided wavelength of the 50 Ohm microstrip line at the filter centre frequency

Recent Advances in Antenna Design for 5G Heterogeneous Networks

The aim of this book is to highlight up to date exploited technologies and approaches in terms of antenna designs and requirements. In this regard, this book targets a broad range of subjects, including the microstrip antenna and the dipole and printed monopole antenna. The varieties of antenna designs, along with several different approaches to improve their overall performance, have given this book a great value, in which makes this book is deemed as a good reference for practicing engineers and under/postgraduate students working in this field. The key technology trends in antenna design as part of the mobile communication evolution have mainly focused on multiband, wideband, and MIMO antennas, and all have been clearly presented, studied and implemented within this book. The forthcoming 5G systems consider a truly mobile multimedia platform that constitutes a converged networking arena that not only includes legacy heterogeneous mobile networks but advanced radio interfaces and the possibility to operate at mm wave frequencies to capitalize on the large swathes of available bandwidth. This provides the impetus for a new breed of antenna design that, in principle, should be multimode in nature, energy efficient, and, above all, able to operate at the mm wave band, placing new design drivers on the antenna design. Thus, this book proposes to investigate advanced 5G antennas for heterogeneous applications that can operate in the range of 5G spectrums and to meet the essential requirements of 5G systems such as low latency, large bandwidth, and high gains and efficiencies

Substrate Integrated Waveguide Devices and Receiver Systems for Millimeter-Wave Applications

RÉSUMÉ La très forte congestion du spectre radiofréquence alloué aux fréquences RF et micro-ondes pour les communications sans fil d’aujourd’hui motive ce travail de recherche qui se consacre aux bandes millimétriques pour lesquelles d’avantages d’allocations spectrales sont disponibles, et qui est particulièrement intéressante pour le transfert à très haut débit. Comparé aux autres technologies de ligne de transmission, le Guide Intégré au Substrat (GIS) montre des avantages très attractifs comme un faible profil, un faible coût, un haut facteur de qualité (facteur Q), de faibles pertes d’insertion... Ce dernier a gagné beaucoup d’attention récemment grâce à ces caractéristiques favorables pour la conception de circuits et systèmes millimétriques. Le sujet de ce doctorat concerne deux tâches de recherche distinctes : la première est dédiée à l’investigation et à la conception de composants et d’antennes GIS innovants pour une possible application en ondes millimétriques; la seconde se consacre à la mise au point et à la démonstration de systèmes de réceptions millimétriques de tailles compactes, faibles pertes, à haut niveau d’intégration et hautes performances. Les chapitres 1 à 4 se concentrent sur l’exploitation et l’investigation, un à un, de composants GIS pour lesquels un nombre de concepts originaux et innovants de structures est proposé et démontré. Dans le chapitre 5, les architectures classiques et les paramètres des systèmes de réception sont introduits, puis utilisés pour la conception de systèmes de réceptions millimétriques dans les chapitres suivants. Du chapitre 6 au chapitre 8, des systèmes submillimétriques et millimétriques basés sur le GIS sont démontrés. Les contributions majeures de cette thèse sont les suivantes : Une structure balancée large bande inhérente peut être obtenue en imprimant un circuit sur deux faces d’un substrat GIS. Ainsi, un balun planaire large bande GIS implémenté sur un circuit imprimé (ou PCB, pour Printed Circuit Board) simple couche est proposé et présenté, suite auquel une nouvelle transition large bande de ligne microruban à ligne parallèle est démontrée. Avec cette transition proposée comme réseau d’alimentation, une nouvelle antenne large bande quasi-Yagi planaire est développée.----------ABSTRACT The heavily congested condition at the existing radio frequency (RF)/microwave spectra allocated for the today’s wireless communications motivates and expedites the research work at millimeter-wave bands where more spectrum space is available for massive data rate delivery. Compared with other transmission line techniques, the substrate integrated waveguide (SIW) platform shows attractive advantages of low profile, low-cost, high Q-factor, and low insertion loss, etc. It has gained a lot of attention recently due to its favorable features in millimeter-wave circuit/system design. The topic of this doctoral dissertation are concerned with two distinct research tasks: (1) investigating and designing innovative SIW components and antennas for possible millimeter-wave applications; (2) developing and demonstrating geometry-compact, low cost, high level of integration and high performance millimeter-wave receiver systems. Chapters 1 to 4 focus on the exploitation and investigation of individual SIW devices, in which a number of original concepts and innovative structures are proposed and demonstrated. In Chapter 5, generic architectures and parameters of receiver systems are discussed and used as a guideline for the millimeter-wave system design in the next chapters. From Chapter 6 to Chapter 8, sub-millimeter/millimeter wave systems based on SIW technique are demonstrated. The major contributions of this thesis work can be highlighted as follows:An inherent broadband balanced structure can be achieved by printing circuits on two opposite sides of an SIW substrate. According to this feature, a broadband SIW planar balun implemented on a single layer printed circuit board (PCB) is proposed and presented, following which another newly proposed broadband microstrip-to-broadside parallel stripline transition is demonstrated. With the proposed transition as the feeding network, a novel broadband printed quasi-Yagi antenna is developed. Half-mode substrate integrated waveguide (HMSIW) and quarter-mode substrate integrated waveguide (QMSIW) techniques are introduced for the purpose of miniaturizing SIW circuits and enhancing the bandwidth

UWB Technology

Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules

Antennas and Propagation

This Special Issue gathers topics of utmost interest in the field of antennas and propagation, such as: new directions and challenges in antenna design and propagation; innovative antenna technologies for space applications; metamaterial, metasurface and other periodic structures; antennas for 5G; electromagnetic field measurements and remote sensing applications