Exploiting programmable architectures for WiFi/ZigBee inter-technology cooperation

The increasing complexity of wireless standards has shown that protocols cannot be designed once for all possible deployments, especially when unpredictable and mutating interference situations are present due to the coexistence of heterogeneous technologies. As such, flexibility and (re)programmability of wireless devices is crucial in the emerging scenarios of technology proliferation and unpredictable interference conditions. In this paper, we focus on the possibility to improve coexistence performance of WiFi and ZigBee networks by exploiting novel programmable architectures of wireless devices able to support run-time modifications of medium access operations. Differently from software-defined radio (SDR) platforms, in which every function is programmed from scratch, our programmable architectures are based on a clear decoupling between elementary commands (hard-coded into the devices) and programmable protocol logic (injected into the devices) according to which the commands execution is scheduled. Our contribution is two-fold: first, we designed and implemented a cross-technology time division multiple access (TDMA) scheme devised to provide a global synchronization signal and allocate alternating channel intervals to WiFi and ZigBee programmable nodes; second, we used the OMF control framework to define an interference detection and adaptation strategy that in principle could work in independent and autonomous networks. Experimental results prove the benefits of the envisioned solution

Survey of Spectrum Sharing for Inter-Technology Coexistence

Increasing capacity demands in emerging wireless technologies are expected to be met by network densification and spectrum bands open to multiple technologies. These will, in turn, increase the level of interference and also result in more complex inter-technology interactions, which will need to be managed through spectrum sharing mechanisms. Consequently, novel spectrum sharing mechanisms should be designed to allow spectrum access for multiple technologies, while efficiently utilizing the spectrum resources overall. Importantly, it is not trivial to design such efficient mechanisms, not only due to technical aspects, but also due to regulatory and business model constraints. In this survey we address spectrum sharing mechanisms for wireless inter-technology coexistence by means of a technology circle that incorporates in a unified, system-level view the technical and non-technical aspects. We thus systematically explore the spectrum sharing design space consisting of parameters at different layers. Using this framework, we present a literature review on inter-technology coexistence with a focus on wireless technologies with equal spectrum access rights, i.e. (i) primary/primary, (ii) secondary/secondary, and (iii) technologies operating in a spectrum commons. Moreover, we reflect on our literature review to identify possible spectrum sharing design solutions and performance evaluation approaches useful for future coexistence cases. Finally, we discuss spectrum sharing design challenges and suggest future research directions

Goodbye, ALOHA!

©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft

Survey on wireless technology trade-offs for the industrial internet of things

Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment

Sub-GHz LPWAN network coexistence, management and virtualization : an overview and open research challenges

The IoT domain is characterized by many applications that require low-bandwidth communications over a long range, at a low cost and at low power. Low power wide area networks (LPWANs) fulfill these requirements by using sub-GHz radio frequencies (typically 433 or 868 MHz) with typical transmission ranges in the order of 1 up to 50 km. As a result, a single base station can cover large areas and can support high numbers of connected devices (> 1000 per base station). Notorious initiatives in this domain are LoRa, Sigfox and the upcoming IEEE 802.11ah (or "HaLow") standard. Although these new technologies have the potential to significantly impact many IoT deployments, the current market is very fragmented and many challenges exists related to deployment, scalability, management and coexistence aspects, making adoption of these technologies difficult for many companies. To remedy this, this paper proposes a conceptual framework to improve the performance of LPWAN networks through in-network optimization, cross-technology coexistence and cooperation and virtualization of management functions. In addition, the paper gives an overview of state of the art solutions and identifies open challenges for each of these aspects

Coordination and Self-Adaptive Communication Primitives for Low-Power Wireless Networks

The Internet of Things (IoT) is a recent trend where objects are augmented with computing and communication capabilities, often via low-power wireless radios. The Internet of Things is an enabler for a connected and more sustainable modern society: smart grids are deployed to improve energy production and consumption, wireless monitoring systems allow smart factories to detect faults early and reduce waste, while connected vehicles coordinate on the road to ensure our safety and save fuel. Many recent IoT applications have stringent requirements for their wireless communication substrate: devices must cooperate and coordinate, must perform efficiently under varying and sometimes extreme environments, while strict deadlines must be met. Current distributed coordination algorithms have high overheads and are unfit to meet the requirements of today\u27s wireless applications, while current wireless protocols are often best-effort and lack the guarantees provided by well-studied coordination solutions. Further, many communication primitives available today lack the ability to adapt to dynamic environments, and are often tuned during their design phase to reach a target performance, rather than be continuously updated at runtime to adapt to reality.In this thesis, we study the problem of efficient and low-latency consensus in the context of low-power wireless networks, where communication is unreliable and nodes can fail, and we investigate the design of a self-adaptive wireless stack, where the communication substrate is able to adapt to changes to its environment. We propose three new communication primitives: Wireless Paxos brings fault-tolerant consensus to low-power wireless networking, STARC is a middleware for safe vehicular coordination at intersections, while Dimmer builds on reinforcement learning to provide adaptivity to low-power wireless networks. We evaluate in-depth each primitive on testbed deployments and we provide an open-source implementation to enable their use and improvement by the community

Performance Prediction and Tuning for Symmetric Coexistence of WiFi and ZigBee Networks

Due to the explosive deployment of WiFi and ZigBee wireless networks, 2.4GHz ISM bands (2.4GHz-2.5GHz) are becoming increasingly crowded, and the co-channel coexistence of these two networks is inevitable. For coexistence networks, people always want to predict their performance (e.g. throughput, energy consumption, etc.) before deployment, or even want to tune parameters to compensate unnecessary performance degradation (owing to the huge differences between these two MAC protocols) or to satisfy some performance requirements (e.g., priority, delay constraint, etc.) of them. However, predicting and tuning performance of coexisting WiFi and ZigBee networks has been a challenging task, primarily due to the lack of corresponding simulators and analytical models. In this dissertation, we addressed the aforementioned problems by presenting simulators and models for the coexistence of WiFi and ZigBee devices. Specifically, based on the energy efficiency and traffic pattern of three practical coexistence scenarios: disaster rescue site, smart hospital and home automation. We first of all classify them into three classes, which are non-sleeping devices with saturated traffic (SAT), non-sleeping devices with unsaturated traffic (UNSAT) and duty-cycling devices with unsaturated traffic (DC-UNSAT). Then a simulator and an analytical model are proposed for each class, where each simulator is verified by simple hardware based experiment. Next, we derive the expressions for performance metrics like throughput, delay etc., and predict them using both the proposed simulator and the model. Due to the higher accuracy of the simulator, the results from them are used as the ground truth to validate the accuracy of the model. Last, according to some common performance tuning requirements for each class, we formulate them into optimization problems and propose the corresponding solving methods. The results show that the proposed simulators have high accuracy in performance prediction, while the models, although are less accurate than the former, can be used in fast prediction. In particular, the models can also be easily used in optimization problems for performance tuning, and the results prove its high efficiency

Intelligent TDMA heuristic scheduling by taking into account physical layer interference for an industrial IoT environment

In an Internet of Things environment, where multiple mobile devices are brought together, it is not always possible to serve all these devices simultaneously. We developed an intelligent Time Division Multiple Access (TDMA) scheduler which allows to plan the individual packets of the different streams in such a way that everyone can be served by taking into account the interference on the physical layer. The scheduler is applied in a realistic industrial environment and evaluated based on the maximum link latency, the channel occupancy, and the jitter. Two strategies are compared: one where the packets are sequentially allocated, and one periodically. Our results show that the periodically allocated strategy performs the best for the maximum link latency (for a packet size below 1200 bytes) and for the jitter. The channel occupancy is similar for both strategies. Furthermore, the performance can be improved by using a higher number of channels. Compared to classic Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA), the channel occupancy and the jitter are reduced up to 69.9 and 99.9%, respectively. Considering the maximum link latency, the proposed TDMA strategies perform significantly better than the worst case CSMA/CA (up to 99.8%), however, when assuming a best case CSMA/CA scenario, CSMA/CA performs better. Furthermore, we clearly show that there are cases where it is not possible to plan all streams when using CSMA/CA while this becomes feasible when applying the proposed TDMA strategies