Mapping DSP algorithms to a reconfigurable architecture Adaptive Wireless Networking (AWGN)

This report will discuss the Adaptive Wireless Networking project. The vision of the Adaptive Wireless Networking project will be given. The strategy of the project will be the implementation of multiple communication systems in dynamically reconfigurable heterogeneous hardware. An overview of a wireless LAN communication system, namely HiperLAN/2, and a Bluetooth communication system will be given. Possible implementations of these systems in a dynamically reconfigurable architecture are discussed. Suggestions for future activities in the Adaptive Wireless Networking project are also given

Generic Feasibility of Perfect Reconstruction with Short FIR Filters in Multi-channel Systems

We study the feasibility of short finite impulse response (FIR) synthesis for perfect reconstruction (PR) in generic FIR filter banks. Among all PR synthesis banks, we focus on the one with the minimum filter length. For filter banks with oversampling factors of at least two, we provide prescriptions for the shortest filter length of the synthesis bank that would guarantee PR almost surely. The prescribed length is as short or shorter than the analysis filters and has an approximate inverse relationship with the oversampling factor. Our results are in form of necessary and sufficient statements that hold generically, hence only fail for elaborately-designed nongeneric examples. We provide extensive numerical verification of the theoretical results and demonstrate that the gap between the derived filter length prescriptions and the true minimum is small. The results have potential applications in synthesis FB design problems, where the analysis bank is given, and for analysis of fundamental limitations in blind signals reconstruction from data collected by unknown subsampled multi-channel systems.Comment: Manuscript submitted to IEEE Transactions on Signal Processin

Programmable rate modem utilizing digital signal processing techniques

The engineering development study to follow was written to address the need for a Programmable Rate Digital Satellite Modem capable of supporting both burst and continuous transmission modes with either binary phase shift keying (BPSK) or quadrature phase shift keying (QPSK) modulation. The preferred implementation technique is an all digital one which utilizes as much digital signal processing (DSP) as possible. Here design tradeoffs in each portion of the modulator and demodulator subsystem are outlined, and viable circuit approaches which are easily repeatable, have low implementation losses and have low production costs are identified. The research involved for this study was divided into nine technical papers, each addressing a significant region of concern in a variable rate modem design. Trivial portions and basic support logic designs surrounding the nine major modem blocks were omitted. In brief, the nine topic areas were: (1) Transmit Data Filtering; (2) Transmit Clock Generation; (3) Carrier Synthesizer; (4) Receive AGC; (5) Receive Data Filtering; (6) RF Oscillator Phase Noise; (7) Receive Carrier Selectivity; (8) Carrier Recovery; and (9) Timing Recovery

Output Filter Aware Optimization of the Noise Shaping Properties of {\Delta}{\Sigma} Modulators via Semi-Definite Programming

The Noise Transfer Function (NTF) of {\Delta}{\Sigma} modulators is typically designed after the features of the input signal. We suggest that in many applications, and notably those involving D/D and D/A conversion or actuation, the NTF should instead be shaped after the properties of the output/reconstruction filter. To this aim, we propose a framework for optimal design based on the Kalman-Yakubovich-Popov (KYP) lemma and semi-definite programming. Some examples illustrate how in practical cases the proposed strategy can outperform more standard approaches.Comment: 14 pages, 18 figures, journal. Code accompanying the paper is available at http://pydsm.googlecode.co

On algebraic time-derivative estimation and deadbeat state reconstruction

This note places into perspective the so-called algebraic time-derivative estimation method recently introduced by Fliess and co-authors with standard results from linear state-space theory for control systems. In particular, it is shown that the algebraic method can in a sense be seen as a special case of deadbeat state estimation based on the reconstructibility Gramian of the considered system.Comment: Maple-supplements available at https://www.tu-ilmenau.de/regelungstechnik/mitarbeiter/johann-reger

A polynomial rooting approach for synchronization in multipath channels using antenna arrays

The estimation of the delay of a known training signal received by an antenna array in a multipath channel is addressed. The effect of the co-channel interference is taken into account by including a term with unknown spatial correlation. The channel is modeled as an unstructured FIR filter. The exact maximum likelihood (ML) solution for this problem is derived, but it does not have a simple dependence on the delay. An approximate estimator that is asymptotically equivalent to the exact one is presented. Using an appropriate reparameterization, it is shown that the delay estimate is obtained by rooting a low-order polynomial, which may be of interest in applications where fast feedforward synchronization is needed.Peer ReviewedPostprint (published version

Finite Impulse Response (FIR) Filters to Simulate Response of an Antenna

In performance analysis of radar/communications systems using computer simulations or physical wave-front generator, it is often desired to include in the simulation the response of the antenna. Incoming signals are distorted by the antenna as they are received, and therefore modeling this effect is crucial to accurate signal processing and analysis. In general, the impulse response of an antenna is not available. However, one can measure or otherwise acquire the gain and phase response of the antenna over the bandwidth of interest at several discrete frequencies. Using these discrete frequency-domain data points, one is interested in obtaining a finite-length filter to represent the antenna response. We have studied several methods using an inverse Fourier transform approach to obtain the filter coefficients. We have shown that if the bandwidth of the filter is somewhat larger than the bandwidth of the incoming signal, that various approaches involving the inverse Fourier transform to obtain the coefficients can be used. The simplest case involves taking the inverse Fourier transform of the frequency data and using the result as the filter coefficients. However, this simple approach may not create a filter that models the antenna within an acceptable error tolerance over the band of interest. The methods studied significantly improved upon the basic Fourier method for determining the filter coefficients. One approach involves windowing the coefficients to further reduce the error. The second approach studied involves windowing the frequency-domain samples. The final approach involves interpolating the data and solving for the coefficients in the least squares sense to obtain further improvements in modeling the antenna