Evaluation of Sigma-Delta-over-Fiber for High-Speed Wireless Applications

Future mobile communication networks aim to increase the communication speed,\ua0provide better reliability and improve the coverage. It needs to achieve all of these enhancements, while the number of users are increasing drastically. As a result, new base-station (BS) architectures where the signal processing is centralized and wireless access is provided through multiple, carefully coordinated remote radio heads are needed. Sigma-delta-over-fiber (SDoF) is a communication technique that can address both requirements and enable very low-complexity, phase coherent remote radio transmission, while transmitting wide-band communication signals with high quality. This thesis investigates the potential and limitations of SDoF communication links as an enabler for future mobile networks.In the first part of the thesis, an ultra-high-speed SDoF link is realized by using state-of-the-art vertical-cavity surface-emitting-lasers (VCSEL). The effects of VCSEL characteristics on such links in terms of signal quality, energy efficiency and potential lifespan is investigated. Furthermore, the potential and limitations of UHS-SDoF are evaluated with signals having various parameters. The results show that, low-cost, reliable, energy efficient, high signal quality SDoF links can be formed by using emerging VCSEL technology. Therefore, ultra-high-speed SDoF is a very promising technique for beyond 10~GHz communication systems.In the second part of the thesis, a multiple-input-multiple-output (MIMO) communication testbed with physically separated antenna elements, distributed-MIMO, is formed by multiple SDoF links. It is shown that the digital up-conversion, performed with a shared local-oscillator/clock at the central unit, provides excellent phase coherency between the physically distributed antenna elements. The proposed testbed demonstrates the advantages of SDoF for realizing distributed MIMO systems and is a powerful tool to perform various communication experiments in real environments.In general, SDoF is a solution for the downlink of a communication system, i.e. from central unit to remote radio head, however, the low complexity and low cost requirement of the remote radio heads makes it difficult to realize the uplinks of such systems. The third part of this thesis proposes an all-digital solution for realizing complementary uplinks for SDoF systems. The proposed structure is extensively investigated through simulations and measurements and the results demonstrate that it is possible realize all-digital, duplex, optical communication links between central units and remote radio heads.In summary, the results in this thesis demonstrate the potential of SDoF for wideband, distributed MIMO communication systems and proposes a new architecture for all-digital duplex communication links. Overall, the thesis shows that SDoF technique is powerful technique for emerging and future mobile communication networks, since it enables a centralized structure with low complexity remote radio heads and provides high signal quality

Distributed Massive MIMO via all-Digital Radio Over Fiber

A crucial challenge in the implementation of distributed massive multiple-input multiple-output (MIMO) architectures is to provide phase coherence while, at the same time, limit the complexity of the remote-radio heads (RRHs), which is important for cost-efficient scalability. To address this challenge, we present in this paper a phase-coherent distributed MIMO architecture, based on off-the-shelf, low-cost components. In the proposed architecture, up- and down-conversion are carried out at the central unit (CU). The RRHs are connected to the CU by means of optical fibers carrying oversampled radio-frequency (RF) 1-bit signals. In the downlink, the 1-bit signal is generated via sigma-delta modulation. At the RRH, the RF signal is recovered from the 1-bit signal through a bandpass filter and a power amplifier, and then fed to an antenna. In the uplink, the 1-bit signal is generated by a comparator whose inputs are the low-noise-amplified received RF signal and a suitably designed dither signal. The performance of the proposed architecture is evaluated with satisfactory results both via simulation and measurements from a testbed

High Capacity Fiber-Connected Wireless MIMO Communication

There will be more and more users while beyond-5G (B5G) and 6G bring more wireless applications. Current cellular communication networks assign specific serving boundaries for each radio, which becomes a limitation when too many users work with one radio simultaneously. By physically distributing radios. user’s service can be more uniform. Radio-over-fiber is a promising enabling technology for distributed antenna systems.To have several tens of Gbit/s data rate, we need to apply millimeter-wave (mm-wave) frequency band in radio-over-fiber (RoF). However, mm-wave signals have weak penetration and high propagation loss. Hence, beamforming and/or multiple-input-multiple-output (MIMO) technology become necessary for mm-wave RoF to overcome those drawbacks.This thesis introduces an automatic distributed MIMO (D-MIMO) testbed with a statistical MIMO capacity analysis for an indoor use case. Raytracing-based simulations also predicts the indoor case to make a comparison. The statistical MIMO capacity analysis shows that D-MIMO has a higher and more uniform capacity than co-located MIMO (C-MIMO) in measurements and simulations.Next, a mm-wave sigma-delta-over-fiber (SDoF) link architecture is proposed for MIMO applications. In the implementation of this link, a QSFP28 fiber link connects a central unit with a remote radio unit with four bandpass sigma-delta-modulation (BPSDM) bitstreams. The remote radio unit generates four mm-wave signals from four BPSDM signals and feeds a linear array antenna. The measurement characterizes the remote radio head at each stage and concludes that this proposed link can reach 800 Msym/s data rate with -0.5 dBm output bandpower.Furthermore, the proposed link is demonstrated with digital beamforming and multi-user MIMO (MU-MIMO) functionalities. The digital beamforming function reaches 700 Msym/s with -25 dB error vector magnitude (EVM) results by improving the received bandpower in comparison to (single-input-single-output) SISO results. The MU-MIMO function serves two independent users at 500 Msym/s symbol rate and satisfies 3GPP requirements at 1 m over-the-air distance.In conclusion, this thesis proves that D-MIMO has a higher and more uniform capacity than C-MIMO by statistical analysis from measurements and simulations. The proposed novel mm-wave SDoF link can pave the way for future D-MIMO applications

Digital Signal Processing Techniques Applied to Radio over Fiber Systems

The dissertation aims to analyze different Radio over Fiber systems for the front-haul applications. Particularly, analog radio over fiber (A-RoF) are simplest and suffer from nonlinearities, therefore, mitigating such nonlinearities through digital predistortion are studied. In particular for the long haul A-RoF links, direct digital predistortion technique (DPDT) is proposed which can be applied to reduce the impairments of A-RoF systems due to the combined effects of frequency chirp of the laser source and chromatic dispersion of the optical channel. Then, indirect learning architecture (ILA) based structures namely memory polynomial (MP), generalized memory polynomial (GMP) and decomposed vector rotation (DVR) models are employed to perform adaptive digital predistortion with low complexities. Distributed feedback (DFB) laser and vertical capacity surface emitting lasers (VCSELs) in combination with single mode/multi-mode fibers have been linearized with different quadrature amplitude modulation (QAM) formats for single and multichannel cases. Finally, a feedback adaptive DPD compensation is proposed. Then, there is still a possibility to exploit the other realizations of RoF namely digital radio over fiber (D-RoF) system where signal is digitized and transmits the digitized bit streams via digital optical communication links. The proposed solution is robust and immune to nonlinearities up-to 70 km of link length. Lastly, in light of disadvantages coming from A-RoF and D-RoF, it is still possible to take only the advantages from both methods and implement a more recent form knows as Sigma Delta Radio over Fiber (S-DRoF) system. Second Order Sigma Delta Modulator and Multi-stAge-noise-SHaping (MASH) based Sigma Delta Modulator are proposed. The workbench has been evaluated for 20 MHz LTE signal with 256 QAM modulation. Finally, The 6x2 GSa/s sigma delta modulators are realized on FPGA to show a real time demonstration of S-DRoF system. The demonstration shows that S-DRoF is a competitive competitor for 5G sub-6GHz band applications

An RF Carrier Bursting System using Partial Quantization Noise Cancellation

This paper introduces a novel method for bandpass cancellation of the quantization noise occurring in high efficiency, envelope pulsed transmitter architectures - or carrier bursting. An equivalent complex baseband model of the proposed system, including the Sigma Delta-modulator and cancellation signal generation, is developed. Analysis of the baseband model is performed, leading to analytical expressions of the power amplifier drain efficiency, assuming the use of an ideal class B power amplifier. These expressions are further used to study the impact of key system parameters, i.e. the compensation signal variance and clipping probability, on the class~B power amplifier drain efficiency and signal-to-noise ratio. The paper concludes with simulations followed by practical measurements in order to validate the functionality of the method and to evaluate the performance-trend predictions made by the theoretical framework in terms of efficiency and spectral purity

Transmitter architectures with digital modulators, D/A converters and switching-mode power amplifiers

This thesis is composed of nine publications and an overview of the research topic, which also summarises the work. The research described in this thesis focuses on research into the digitalisation of wireless communication base station transmitters. In particular it has three foci: digital modulation, D/A conversion and switching-mode power amplification. The main interest in the implementation of these circuits is in CMOS. The work summarizes the designs of several circuit blocks of a wireless transmitter base station. In the baseband stage, a multicarrier digital modulator that combines multiple modulated signals at different carrier frequencies digitally at baseband, and a multimode digital modulator that can be operated for three different communications standards, are implemented as integrated circuits. The digital modulators include digital power ramping and power level control units for transmission bursts. The upconversion of the baseband signal is implemented using an integrated digital quadrature modulator. The work presented provides insight into the digital-to-analogue interface in the transmitters. This interface is studied both by implementing an intermediate frequency D/A converter in BiCMOS technology and bandpass Delta-Sigma modulator-based D/A conversion in CMOS technology. Finally, the last part of the work discusses switching-mode power amplifiers which are experimented with both as discrete and integrated implementations in conjunction with 1-bit Delta-Sigma modulation and pulse-width modulation as input signal generation methods.Tämä väitöskirja koostuu yhdeksästä julkaisusta ja tutkimusaiheen yhteenvedosta. Väitöskirjassa esitetty tutkimus keskittyy langattaman viestinnän tukiasemien lähettimien digitalisoinnin tutkimukseen. Yksityiskohtaisemmin tutkimusalueet ovat: digitaalinen modulaatio, D/A muunnos ja kytkinmuotoiset tehovahvistimet. Näiden elektronisten piirien toteutuksessa keskitytään CMOS teknologiaan. Työ vetää yhteen useiden langattoman viestinnän tukiasemien lähettimien piirilohkojen suunnittelun. Kantataajuusasteella toteutetaan integroituna piirinä monikantoaaltoinen digitaalinen modulaattori, joka yhdistää useita moduloituja signaaleja eri kantoaalloilla digitaalisesti ja monistandardi digitaalinen modulaatori, joka tukee kolmea eri viestintästandardia. Digitaaliset modulaattoripiirit sisältävät digitaalisen tehoramping ja tehotason säätöyksikön lähetyspurskeita varten. Kantataajuussignaalin ylössekoitus toteutetaan integroitua digitaalista kvadratuurimodulaattoria käyttäen. Esitetty työ antaa näkemystä lähettimien digitalia-analogia rajapintaan, jota tutkitaan toteuttamalla välitaajuinen D/A muunnin BiCMOS teknologialla ja päästökaistainen Delta-Sigma-modulaattoripohjainen D/A muunnin CMOS teknologialla. Lopuksi työn viimeinen osa käsittelee kytkinmuotoisia tehovahvistimia, joita tutkitaan kokeellisesti sekä erilliskompontein toteutettuina piirein että integroiduin piirein toteutettuina käyttäen sisääntulosignaalin muodostamismenetemänä yksibittistä Delta-Sigma-modulaatiota ja pulssin leveys modulaatiota.reviewe

Design of a Class-D RF power amplifier in CMOS technology

In this thesis an RF Class-D Power Amplifier is presented. The analysis of the Class-D amplifier considering ideal components has shown that the drain efficiency of 100% can be achieved. The output power and the drain efficiency are degraded by the internal resistance of each component. A driver is used to drive the gate capacitances of the Class-D amplifier. Both driver and amplifier are implemented with CMOS inverters. The size of the inverters in the driver is scaled down by a factor of 3 relatively to the preceding stage. The first being the inverter of the Class-D amplifier. At the output a 3rd order Butterworth bandpass filter is implemented. A non-ideal analysis of the Class-D amplifier is performed to create a base model which is used to aid in the design of the circuit. The RF Class-D Power Amplifier with the operation frequency of 2.4GHz was implemented with standard 130 nm CMOS technology. Two simulations were taken into account considering ideal and pre-layout components in the output filter. The following results were obtained when using ideal components: the output power of 6.91 dBm, the drain efficiency of 40% and the overall efficiency of 23%. Using pre-layout components the results were the following: the output power of 0.317 dBm the drain and overall efficiency of 8.6% and 4.9%, respectively

Novas arquiteturas para transmissores digitais flexíveis e de banda larga

Next generation of wireless communication (5G) devices must achieve higher data rates, lower power consumption and better coverage by making a more efficient use of the RF spectrum and adopting highly exible radio architectures. To meet these requirements, the development of new radio devices will be far more complex and challenging than their predecessors. The future of radio communications have a twofold evolution, being one the low power consumption and the other the adaptability and intelligent use of the available resources. Conventional approaches for the radio physical layer are not capable to cope with the new demand for multi-band, multi-standard radio signals and present an inefficient and expensive solution for simultaneous transmission of multiple and heterogeneous radio signals. Digital radio transmitters have been presented as a solution for a newer and more exible architecture for future radios. All-digital transmitters use a completely digital implementation of the entire radio datapath from the baseband processing to the digital RF up-conversion. This concept bene ts from the use of highly integrated hardware together with a strong radio digitalization, motivated by the exibility and high performance from cognitive and software defi ned radio. However, such devices are still far from a massive deployment in most of communication scenarios due to some limiting factors that hinder their use. This PhD thesis aims to the development of novel radio architectures and ideas based on all-digital transmitters capable of improving the adaptability and use intelligently the available resources for software de ned and cognitive radio systems. The focus of this thesis is on the improvement of some of the common limitations for all-digital transmitters such as power efficiency, bandwidth, noise-shaping and exibility while using efficient and adaptable digital architectures. In the initial part of the thesis a review of the state-of-the-art is presented showing the most common digital transmitter architectures as well as their major bene ts and key limitations. A comparative analysis of such architectures is made considering their power and spectral efficiency, exibility, performance and cost. Following this initial analysis, the work developed on the course of this PhD is presented and discussed. The initial focus is on the improvement of all-digital transmitters bandwidth trough the study and use of parallel processing techniques capable of greatly improve common bandwidth values presented in the state-of-the-art. The presented work has resulted in several publications where FPGA-based architectures use parallel digital processing techniques to improve the system's bandwidth by a factor higher than 10. Other fundamental contribution of this thesis is focused on the pulsedtransmitters coding efficiency. In this section of the thesis, a method is presented showing the reduction of the quantization noise created by low amplitude resolution digital transmitters using multiple combined pulsedtransmitters to cancel the noise in speci c frequencies. This work has resulted in two main publications that showed how to increase the coding efficiency of the pulse-transmitters as well as the overall efficiency of the transmission system. Lastly, new-noise shaping methods are presented in order to develop new and more exible architectures for all-digital transmitters. The methods presented use new quantization processes that allow for the shaping of the quantization noise produced in pulsed-transmitters while using very simple and adaptable architectures. With these new techniques, it is possible to adjust the noise frequency distribution and deliberately change the noise shape in order to change some of the transmitter's characteristics such as central frequency or bandwidth. The work presented on this thesis has shown promising improvements to the all-digital transmitters' state-of-the-art, either in simulations and laboratory prototype measurements. It has contributed to advance the state-of-the-art in agile and power efficient all-digital RF transmitters with multi-mode and multi-channel capabilities and the improvement of the transceiver's bandwidth enabling the development of true software de ned and cognitive radio systemsA próxima geração de comunicações sem os (5G) exigirá taxas de transmissão mais elevadas, maior efi ciência energética e uma melhor cobertura fazendo um uso mais efi ciente do espectro de radiofrequência e adotando o uso de arquiteturas rádio mais flexíveis. Para cumprir tais requisitos, o desenvolvimento de novos dispositivos rádio será substancialmente mais complexo do que nas gerações anteriores. O futuro das comunicações rádio depende maioritariamente de dois fatores; o baixo consumo de potência e o uso inteligente dos recursos e tecnologias disponíveis. As abordagens convencionais para a camada física dos sistemas rádio não são as mais adequadas para lidar com a necessidade de dispositivos multi-banda e que usem múltiplos standards, por serem soluções inefi cientes e demasiado caras para esse efeito. Os transmissores rádio completamente digitais têm vindo a ser apresentados na literatura como uma solução inovadora e mais flexível para a implementação dos futuros sistemas de rádio. Os transmissores completamente digitais apresentam uma implementação da cadeia de processamento rádio, desde a banda-base até à conversão para RF, completamente constituída por lógica digital. Este conceito tira partido da vasta integração alcançada nas arquiteturas digitais, juntamente com a flexibilidade proveniente da digitalização das arquiteturas rádio que já se encontra em curso com a evolução dos rádios cognitivos e definidos por software. No entanto, devido a algumas limitações inerentes à tecnologia, este tipo de transmissores ainda não é amplamente utilizado na maioria dos sistemas. Esta tese de doutoramento propõe e avalia novas arquiteturas para transmissores completamente digitais, bem como novas técnicas de processamento de sinal que possam beneficiar das tecnologias de implementação existentes (e.g. FPGAs) por forma a construir novos transmissores digitais de forma eficiente e flexível. O objetivo desta tese é reduzir as limitações atuais ainda presentes neste tipo de transmissores, nomeadamente as relacionadas com a eficiência, largura de banda, cancelamento de ruído e falta de flexibilidade. Na parte inicial desta tese é realizada a revisão do estado da arte das diversas topologias de transmissores digitais bem como as suas principais vantagens e limitações técnicas. É também feita uma análise comparativa das diversas técnicas apresentadas em termos da sua eficiência energética, flexibilidade, desempenho e custo. De seguida, é apresentado o trabalho desenvolvido no contexto desta tese de doutoramento, seguindo-se uma discussão focada na resolução das atuais limitações deste tipo de transmissores. A primeira parte foca-se no uso de técnicas de processamento paralelo de sinal, por forma a suportar sinais de largura de banda mais elevada que os reportados no atual estado da arte. O trabalho desenvolvido e publicado baseia-se no uso de arquiteturas implementadas em FPGA que contribuíram para um aumento da largura de banda num fator de aproximadamente dez vezes. Outra das contribuições fundamentais desta tese consiste no aumento da eficiência do sistema através da melhoria da eficiência de codificação do sinal pulsado produzido. Com base no uso de múltiplos transmissores pulsados, e apresentado um esquema de combinação construtiva e destrutiva de sinais para a redução do ruído de quantização proveniente das técnicas de processamento de sinal pulsado usadas. Este trabalho resultou em duas importantes publicações que mostram que a melhoria da eficiência de codificação do sinal pode ser utilizada de forma a obter uma maior eficiência energética do transmissor. Por ultimo, são apresentadas diversas técnicas para a conversão dos sinais banda-base em sinais RF pulsados. As propostas apresentadas permitem o uso de uma arquitetura de hardware simplista, mas configurável por software, o que a torna bastante flexível. Com o uso desta arquitetura e possível alterar em pleno funcionamento a frequência central bem como a largura de banda e resposta do conversor pulsado. O trabalho apresentado nesta tese demonstra alguns dos melhoramentos no estado da arte para transmissores r adio completamente digitais, baseando os resultados obtidos não apenas em simulações mas também na implementação e medidas realizadas sobre protótipos laboratoriais. O trabalho desenvolvido no âmbito desta tese contribuiu com avanços na implementação de transmissores ageis, eficientes, com maior largura de banda e capazes de transmissão em múltiplas bandas com recurso a múltiplos protocolos, abrindo caminho para o desenvolvimento de novos rádios cognitivos e definidos por softwareFCT, FSEPrograma Doutoral em Engenharia Eletrotécnic

6G Radio Testbeds: Requirements, Trends, and Approaches

The proof of the pudding is in the eating - that is why 6G testbeds are essential in the progress towards the next generation of wireless networks. Theoretical research towards 6G wireless networks is proposing advanced technologies to serve new applications and drastically improve the energy performance of the network. Testbeds are indispensable to validate these new technologies under more realistic conditions. This paper clarifies the requirements for 6G radio testbeds, reveals trends, and introduces approaches towards their development

Analysis of distortion in pulse modulation converters for switching radio frequency power amplifiers

High-efficiency linear radio frequency (RF) power amplifiers are needed for today’s wireless communication systems. Switch mode techniques have the potential for high efficiency but require a pulse drive signal. The generation of pulse width modulated signals and pulse position modulated signals by sigma delta modulators can introduce unwanted spectral components. Third order and image components are the dominant distortions generated in the pulse position modulation circuit. The authors identify the cause of distortion and mathematically quantify its amplitude and frequency. In a single carrier environment, an increase in offset frequency increases the unwanted spectral components. Calculations, simulations and measurements show that offsets less than 1% of the carrier frequency are required to keep unwanted components 40 dB below the signal level. Simulations and measurements show that the effect on a multichannel orthogonal frequency division multiplexing (OFDM) system is less detrimental. Nonetheless, unacceptable noise increases of up to 20 dB are observed in odd harmonic channels when the transmission is not centred on the nominal carrier frequency