Bicriteria scheduling of a two-machine flowshop with sequence-dependent setup times

The official published version of the article can be found at the link below.A two-machine flowshop scheduling problem is addressed to minimize setups and makespan where each job is characterized by a pair of attributes that entail setups on each machine. The setup times are sequence-dependent on both machines. It is shown that these objectives conflict, so the Pareto optimization approach is considered. The scheduling problems considering either of these objectives are NP-hard , so exact optimization techniques are impractical for large-sized problems. We propose two multi-objective metaheurisctics based on genetic algorithms (MOGA) and simulated annealing (MOSA) to find approximations of Pareto-optimal sets. The performances of these approaches are compared with lower bounds for small problems. In larger problems, performance of the proposed algorithms are compared with each other. Experimentations revealed that both algorithms perform very similar on small problems. Moreover, it was observed that MOGA outperforms MOSA in terms of the quality of solutions on larger problems.Partial Funding from EPSRC under grant EP/D050863/1

A Bicriteria Simulated Annealing Algorithm for Scheduling Jobs on Parallel Machines with Sequence Dependent Setup Times

The study considers the scheduling problem of identical parallel machines subject to minimization of the maximum completion time and the maximum tardiness expressed in a linear convex objective function. The maximum completion time or makespan is the date when the last job to be completed leaves the system. The maximum tardiness is indicated by the job that is completed with the longest delay relative its due date. Minimizing both criteria can help assuring a high utilization of the production system as well as a high level of service towards the client. Due to the complexity of the problem, a Simulated Annealing (SA) heuristic has been implemented to be able to obtain an efficient solution in a reasonable running time. A set of n jobs is assigned, to one of the m identical parallel machines. Each job is processed in only one operation before its completion after which it leaves the system. Constraints, such as due dates for each job and setup times for the machines, are considered. The resolution procedure consists of two phases and begins with an initial solution generator. Then a SA heuristic is applied for further improvement of the solution. 4 generators are used to create an initial solution and 3 to generate neighbour solutions. To test and verify the performance of the proposed resolution procedure, a computational experimentation has been realized on a set of test problems generated ad-hoc

Enhanced genetic algorithm-based fuzzy multiobjective strategy to multiproduct batch plant design

This paper addresses the problem of the optimal design of batch plants with imprecise demands in product amounts. The design of such plants necessary involves how equipment may be utilized, which means that plant scheduling and production must constitute a basic part of the design problem. Rather than resorting to a traditional probabilistic approach for modeling the imprecision on product demands, this work proposes an alternative treatment by using fuzzy concepts. The design problem is tackled by introducing a new approach based on a multiobjective genetic algorithm, combined wit the fuzzy set theory for computing the objectives as fuzzy quantities. The problem takes into account simultaneous maximization of the fuzzy net present value and of two other performance criteria, i.e. the production delay/advance and a flexibility index. The delay/advance objective is computed by comparing the fuzzy production time for the products to a given fuzzy time horizon, and the flexibility index represents the additional fuzzy production that the plant would be able to produce. The multiobjective optimization provides the Pareto's front which is a set of scenarios that are helpful for guiding the decision's maker in its final choices. About the solution procedure, a genetic algorithm was implemented since it is particularly well-suited to take into account the arithmetic of fuzzy numbers. Furthermore because a genetic algorithm is working on populations of potential solutions, this type of procedure is well adapted for multiobjective optimization

Multicriteria hybrid flow shop scheduling problem: literature review, analysis, and future research

This research focuses on the Hybrid Flow Shop production scheduling problem, which is one of the most difficult problems to solve. The literature points to several studies that focus the Hybrid Flow Shop scheduling problem with monocriteria functions. Despite of the fact that, many real world problems involve several objective functions, they can often compete and conflict, leading researchers to concentrate direct their efforts on the development of methods that take consider this variant into consideration. The goal of the study is to review and analyze the methods in order to solve the Hybrid Flow Shop production scheduling problem with multicriteria functions in the literature. The analyses were performed using several papers that have been published over the years, also the parallel machines types, the approach used to develop solution methods, the type of method develop, the objective function, the performance criterion adopted, and the additional constraints considered. The results of the reviewing and analysis of 46 papers showed opportunities for future researchon this topic, including the following: (i) use uniform and dedicated parallel machines, (ii) use exact and metaheuristics approaches, (iv) develop lower and uppers bounds, relations of dominance and different search strategiesto improve the computational time of the exact methods,  (v) develop  other types of metaheuristic, (vi) work with anticipatory setups, and (vii) add constraints faced by the production systems itself

New solution methods for single machine bicriteria scheduling problem: Minimization of average flowtime and number of tardy jobs

Cataloged from PDF version of article.We consider the bicriteria scheduling problem of minimizing the number of tardy jobs and average flowtime on a single machine. This problem, which is known to be NP-hard, is important in practice, as the former criterion conveys the customer’s position, and the latter reflects the manufacturer’s perspective in the supply chain. We propose four new heuristics to solve this multiobjective scheduling problem. Two of these heuristics are constructive algorithms based on beam search methodology. The other two are metaheuristic approaches using a genetic algorithm and tabu-search. Our computational experiments indicate that the proposed beam search heuristics find efficient schedules optimally in most cases and perform better than the existing heuristics in the literature. 2009 Elsevier B.V. All rights reserved

Heuristic Approach to Job Scheduling in a Small Scale Groundnut Oil Processing Firm in Nigeria

Groundnut is an important legume cash crop for tropical farmers and its seeds contain high amounts of edible oil (43-55%) and protein (25-28%). This paper developed a framework for the scheduling of activities (jobs) in small scale groundnut oil processing firm in Nigeria. The research problem is addressed using makespan as a measure of performance with CDS, A1 and Usual Serial Order (USO) heuristics solution methods. Findings reveal that A1 and CDS heuristics are preferred to the traditional USO methods. Also, the mean of A1 (27.11) heuristic, followed by CDS (27.22) heuristics, gives the best makespan results while the USO (31.52) gives the worst result. This paper thus presents a framework that could be beneficial to stakeholders in the Groundnut oil processing industry towards improved customer’s satisfaction, less idle time, and profit optimization. Keywords: Groundnut, small enterprises, scheduling of orders, makespans, optimum results

Multiobjective genetic algorithm strategies for electricity production from generation IV nuclear technology

Development of a technico-economic optimization strategy of cogeneration systems of electricity/hydrogen, consists in finding an optimal efficiency of the generating cycle and heat delivery system, maximizing the energy production and minimizing the production costs. The first part of the paper is related to the development of a multiobjective optimization library (MULTIGEN) to tackle all types of problems arising from cogeneration. After a literature review for identifying the most efficient methods, the MULTIGEN library is described, and the innovative points are listed. A new stopping criterion, based on the stagnation of the Pareto front, may lead to significant decrease of computational times, particularly in the case of problems involving only integer variables. Two practical examples are presented in the last section. The former is devoted to a bicriteria optimization of both exergy destruction and total cost of the plant, for a generating cycle coupled with a Very High Temperature Reactor (VHTR). The second example consists in designing the heat exchanger of the generating turbomachine. Three criteria are optimized: the exchange surface, the exergy destruction and the number of exchange modules

A Bicriteria Simulated Annealing Algorithm for Scheduling Jobs on Parallel Machines with Sequence Dependent Setup Times

The study considers the scheduling problem of identical parallel machines subject to minimization of the maximum completion time and the maximum tardiness expressed in a linear convex objective function. The maximum completion time or makespan is the date when the last job to be completed leaves the system. The maximum tardiness is indicated by the job that is completed with the longest delay relative its due date. Minimizing both criteria can help assuring a high utilization of the production system as well as a high level of service towards the client. Due to the complexity of the problem, a Simulated Annealing (SA) heuristic has been implemented to be able to obtain an efficient solution in a reasonable running time. A set of n jobs is assigned, to one of the m identical parallel machines. Each job is processed in only one operation before its completion after which it leaves the system. Constraints, such as due dates for each job and setup times for the machines, are considered. The resolution procedure consists of two phases and begins with an initial solution generator. Then a SA heuristic is applied for further improvement of the solution. 4 generators are used to create an initial solution and 3 to generate neighbour solutions. To test and verify the performance of the proposed resolution procedure, a computational experimentation has been realized on a set of test problems generated ad-hoc

A Predictive-reactive Approach for JSP with Uncertain Processing Times

The paper is supported by the Asia-Link project funded by the European Commission (CN/ASIA-LINK/024 (109093)), the National Natural Science Foundation of China (50705076, 50705077), and the National Hi-Tech R&D Program of China (2007AA04Z187)JSP with discretely controllable processing times (JSP-DCPT) that are perturbed in a turbulent environment is formulated, based on which, a time-cost tradeoff based predictive-reactive scheduling approach is proposed for solving the problem. In the predictive scheduling process, on the basis of a proposed three-step decomposition approach for solving JSP-DCPT, a solution initialization algorithm is presented by incorporating a hybrid algorithm of tabu search and simulated annealing and a fast elitist non-dominated sorting genetic algorithm; in the reactive scheduling process, Pareto-optimal schedules are generated, among which every schedule that is not dominated by any initial schedule can be selected as the responding schedule so as to maintain optimality of the objective that is to minimize both the makespan and the cost. Experimental simulations demonstrate the effectiveness of the proposed approach